Awd 4dr 3.0si Low Miles Suv Automatic Gasoline 3.0l Dohc 24-valve I6 Engine-inc: on 2040-cars

Auto blog

Is the skill of rev matching being lost to computers?

If the ability to drive a vehicle equipped with a manual gearbox is becoming a lost art, then the skill of being able to match revs on downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. The usefulness of rev matching in street driving is limited most of the time – aside from sounding cool and impressing your friends. But out on a race track or the occasional fast, windy road, its benefits are abundantly clear. While in motion, the engine speed and wheel speed of a vehicle with a manual transmission are kept in sync when the clutch is engaged (i.e. when the clutch pedal is not being pressed down). However, when changing gear, that mechanical link is severed briefly, and the synchronization between the motor and wheels is broken. When upshifting during acceleration, this isn't much of an issue, as there's typically not a huge disparity between engine speed and wheel speed as a car accelerates. Rev-matching downshifts is the stuff they would teach at the automotive equivalent of the Shaolin Temple. But when slowing down and downshifting – as you might do when approaching a corner at a high rate of speed – that gap of time caused by the disengagement of the clutch from the engine causes the revs to drop. Without bringing up the revs somehow to help the engine speed match the wheel speed in the gear you're about to use, you'll typically get a sudden jolt when re-engaging the clutch as physics brings everything back into sync. That jolt can be a big problem when you're moving along swiftly, causing instability or even a loss of traction, particularly in rear-wheel-drive cars. So the point of rev matching is to blip the throttle simultaneously as you downshift gears in order to bring the engine speed to a closer match with the wheel speed before you re-engage the clutch in that lower gear, in turn providing a much smoother downshift. When braking is thrown in, you get heel-toe downshifting, which involves some dexterity to use all three pedals at the same time with just two feet – clutch in, slow the car while revving, clutch out. However, even if you're aware of heel-toe technique and the basic elements of how to perform a rev match, perfecting it to the point of making it useful can be difficult.

M-fographic breaks down the history of BMW performance machinery

Few characters carry the kind of clout among performance enthusiasts as the letter M. For 35 years now, that one letter has adorned over 300,000 BMWs, each tuned to deliver a higher degree of performance than the stock models on which they're based.
The M division has worked up nearly 100 different models over the past third of a century, which can leave even the most expert among Bimmer fanatics bewildered. Fortunately British auto loan service Carfinance247 has commissioned this handy infographic to make sense of it all, and you can check it out below to see what the letter M really stands for.

Weekly Recap: The divergent paths of Tesla and Fisker

There's no doubt that Tesla is downshifting while Fisker has been grinding its gears. But it wasn't always that way.
In the wake of Tesla's recent success, it's easy to forget that there were once two California electric carmakers with bright futures.