2010 Bmw X3 3.0i X-drive No Reserve Salvage Rebuildable Lite Interior Fire on 2040-cars

Auto blog

BMW X4 order guide sneaks onto the web

Much like we gave you an early look at the ordering guide for the BMW M3 and M4 (you can now configure those two, as well), yet another list of BMW options has leaked out. This time, the upcoming X4 is the target. We told you last month that prices for the X3-sized, X6-shaped vehicle started at $45,625, and now, we can confirm everything else for the newest Bimmer.
Only two trim lines will be available when the X4 arrives - M Sport and xLine. The former starts at $2,300 for the xDrive28i model and $1,900 for the xDrive35i, and includes as standard, 19-inch wheels (or optional 20s for $950), sport seats, an M steering wheel, a more aggressive body kit, a black headliner and the option of brushed aluminum interior trim. The xLine is $1,500 for the 28i and $1,000 for the 35i, and is made up exclusively of 19-inch Y-spoke wheels and dark copper interior trim.
Metallic colors dominate the pallet, with just a pair of gloss options available alongside the $550 metal-flake colors. BMW offers a pair of SensaTec leatherette options, along side a wide variety of $1,450 leather trims.

BMW-Toyota partnership to spawn hybrid supercar

BMW and Toyota inked a partnership some time ago to develop green technology, and while we were excited by the idea of a reborn Supra with BMW's carbon fiber reinforced plastic slashing the curb weight or an ultra-efficient, hybridized 1 Series, the joint efforts have been rather limited. That's set to change, though, according to a report from Australia.
Motoring reports that the partners have come to terms on a sports car. And not just any sports car, but a lightweight, hybridized model, with a six-figure price tag. Lending a bit of street cred to that idea is the site's claim that Toyota is currently carrying out durability testing on the BMW i8. According to the site, the new model will slot into the spot left by the Lexus LFA, although based on the language used, it's unclear if this is the Tokyo-bound vehicle we mentioned several months ago.
Details on this potential car are limited, although Motoring claims it will use a Toyota hybrid system mated up to a BMW gas engine - likely the 4.4-liter, twin-turbo V8 found in the M5 and M6. That sounds pretty amazing to us, but we'd still advise taking this with a grain of salt. What would you like to see out of a joint-venture supercar from Toyota and BMW? Let us know in Comments, and have your say on the prospects of a hybridized, twin-turbocharged V8.

BMW 1 Series prototype packs direct water injection

Just a few months ago, BMW showcased an M4 that was modified to serve as the safety car for the MotoGP racing series. The flashing lights and emergency equipment, however, weren't the only modifications BMW made to the performance coupe. It also packed an innovative new water injection system. And now it's furthering the development of that system by running it in a 1 Series hatchback as well. Revealed at the BMW Group Innovation Days 2015 event, this five-door 1 Series packs a three-cylinder gasoline engine – like the one found in a Mini or i8 – but fitted with the direct water injection system. In this application, the system sprays a fine mist of water – yep, regular old H2O – right into the combustion chamber. While mixing water with gasoline normally wouldn't be recommended, in this case it evaporates immediately and helps cool the engine from the inside, allowing it to run at higher efficiency. That cooler running engine brings with it several benefits. It delivers improved fuel economy and lower emissions, to start. It also allows for an earlier ignition point, higher compression ratio, and higher boost pressure in turbocharged engines, delivering increased output. It even cuts down on engine knocking (where combustion occurs spontaneously), reduces wear and tear on the engine, and makes better use of lower octane levels. If that sounds like a win-win-win... win (we're losing count of all the wins here), it's because BMW just may be on to something. Of course it does require a water tank to be fitted on board, which means added weight, but instead of requiring the driver fill up the water tank, BMW has fitted this prototype with a system that replenishes the water level from the air conditioning system when the vehicle is switched off. So unless it's being driven in a particularly extreme climate, it doesn't even need topping up. Add one more "win" to the list, then. Extra power, improved real-world fuel economy: Direct water injection enhances efficiency. With direct water injection for turbocharged petrol engines, the BMW Group has again succeeded in enhancing the capabilities of conventional engine technology through an ongoing process of refinement and improvement. The precisely controlled injection of water into the engine cylinders produces a cooling effect that boosts power and torque, particularly when operating at or near full throttle, while at the same time reducing fuel consumption and emissions.