1988 Bmw M6 Base Coupe 2-door 3.5l on 2040-cars

Auto blog

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.

Watch two championship-winning DTM cars from BMW go head-to-head

BMW recently had a little fun with two of the company's past DTM champions. Roberto Ravaglia and Bruno Spengler, winners of the 1989 and 2012 championships, respectively, both showed up at the world-famous Hockenheimring with their title-winning cars. The two swapped seats, with Ravaglia taking the helm of Spengler's BMW M3 DTM racer and Spengler sliding behind the wheel of Ravaglia's first-generation M3 racer in the classic BMW Bank livery, and headed for the track. Spengler got a 23 second head start in the first-gen M3 with Ravaglia chasing behind.
It didn't take long for the older hotshoe to sort out his new ride and close the gap. The short clip below follows the two as they make their way around the circuit, but the really interesting portion comes when the pair begin discussing what they like and don't like about each other's machines. You can check out the full video below for yourself.

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.