2013 4dr Sdn 4.4l White on 2040-cars

Auto blog

2016 BMW 7 Series slims down, techs up

BMW is finally pulling the wraps off its sixth-generation 7 Series. The flagship boasts a ton of improvements for 2016, including a smattering of onboard tech and weight reduction of 190 pounds. The 7 Series uses a new internal structure called Carbon Core. Derived from the i sub-brand, Carbon Core uses a mix of carbon-fiber-reinforced plastic and ultra-high-tensile steel for the 7's major structural components. It's largely responsible for the 190-pound weight reduction, along with the aluminum doors and trunk lid. The weight savings has allowed BMW to maintain a fifty-fifty weight distribution. That new structure underpins the largest sedan BMW has ever produced. At 206.6 inches in total, the long-wheelbase-only 7 Series is over an inch longer than its predecessor. Its 124.6-inch wheelbase and 74.9-inch width, though, remain unchanged. Even with such a modest increase in size, BMW is claiming best-in-class rear legroom, at 44.4 inches – a tenth of an inch more than the current 7. Unlike the old car, though, this new 7 Series gets with the times in terms of chauffeur equipment. The front passenger seat can be slid forward and folded, allowing a lucky rear passenger to take advantage of the new pop-out footrest and optional 42.5-degree seat incline, available as part of the Rear Executive Lounge Seating Package. iDrive now adds a number of 3D sensors that respond to pre-programed hand motions. The 7 Series will debut here in the United States with two engines, both of which should be familiar to BMW consumers. There's a 320-horsepower, 3.0-liter, turbocharged six-cylinder in the nose of the 740i, and a 4.4-liter, twin-turbocharged V8 with 445 hp on tap in the 750i xDrive. 60 miles per hour arrives in a relaxed 5.4 seconds for the 740i and 4.3 seconds in the V8 model. Once again, ZF provides the eight-speed automatic transmission used with both engines. Joining the 740i and 750i is the new 740e xDrive. The plug-in-hybrid sedan is motivated by a 2.0-liter, turbocharged four-cylinder and an electric motor, and is capable of 23 miles per charge and speeds of up to 75 miles per hour in pure electric mode. Tthere's no shortage of tech on the latest 7 Series. While we're familiar with some items, like active grille shutters and BMW's Air Breather system, it's items like the gesture-control-equipped iDrive 5.0 that pique our interest. Alongside the new and standard touchscreen, iDrive now adds a number of 3D sensors that respond to pre-programed hand motions.

These BMW M6 GTLM racing liveries are great

This weekend we'll see a whole new crop of racing machinery line up for the start of the 24 Hours of Daytona, including the new BMW M6 GTLM. So far we've only seen it in flat black, but now the Bavarian automaker has revealed two special liveries for the two cars it will be fielding in the race this weekend. The number 25 car features a throwback livery that reinterprets BMW's classic racing stripes of red, dark blue, and light blue over white bodywork. It's designed to be reminiscent of – and even features images of – legendary racing machinery from the Roundel marque's history. Those include the 3.0 CSL that wore the same number when it took the company's first win in the US at Sebring in 1975, the M1 sports car from the early 1980s, the V12 LMR that scored BMW's only Le Mans victory to date in 1999, and the M3 GT that dominated the American Le Mans Series in 2011. The second car features a more futuristic livery, wearing the number 100 to mark the automaker's centenary and a multicolor lattice design applied with a luminescent 3D-effect reflective vinyl on a white body. They'll both be fielded by BMW Team RLL, a partnership between the manufacturer and Rahal Letterman Lanigan Racing (of Indy fame), which took a class win at Laguna Seca last year. The new M6 GTLM replaces the previous Z4 GTLM and will proliferate across racing grids in motorsport series around the world following its race debut this weekend. But it won't be the only new piece of racing kit turning a wheel in anger for the first time at Daytona; the new Ford GT and Ferrari 488 GTE will be competing in the GT Le Mans class alongside proven competition machinery. BMW Team RLL reveals 100th anniversary livery for the BMW M6 GTLM race cars in Daytona. Daytona (US), 27th January 2016. BMW Team RLL today revealed two commemorative 100th anniversary liveries for the new BMW M6 GTLM race cars, with which Bobby Rahal's (US) team will compete in the 24 Hours of Daytona (US). The race forms the first round of the 2016 IMSA WeatherTech SportsCar Championship (IWSC). The number 25 car sports a look reminiscent of the iconic BMW 3.0 CSL, which contested its first season of racing in North America back in 1975 and claimed the first victory in Daytona 40 years ago. The second BMW M6 GTLM will race with the number 100. To mark BMW's 100th anniversary this year, its livery looks to the future.

BMW X4 reclaims dash of utility with Clemson student project [w/videos]

BMW seems willing to exploit every automotive niche it can find with creations like the four-door, 'crossover coupe' X4 and X6. Of course, these designs come with a compromise. That svelte fastback means that they just can't haul as much cargo as a more traditional, boxier hatchback. Fortunately, students at Clemson University's International Center for Automotive Research might have a novel solution: the engineering graduate program has turned the crossover into a unique pickup.
Dubbed Deep Orange 4 concept, this functional prototype has an enclosed cargo area with a sliding glass panel that opens up to expose a pickup bed if more room is needed. Think of it as the GMC Envoy XUV of German crossovers. This isn't just an X4 with its roof hacked off, though. The students actually started with an X3 and grafted on this top later in addition to the two barn doors for access to the bed.
To make this project even more impressive, this pickup-crossover could conceivably be produced. The graduate students conducted an in-plant analysis of BMW's manufacturing abilities and went back to the university to create a plan for a low-volume vehicle that could actually be built. "The students working on this phase of the project did an excellent job of keeping costs down while finding optimal integration opportunities," said Rich Morris, vice president of assembly at BMW Manufacturing, in the university's release.