2013 Bmw M3 Cpe Frozen White Ed Comp & Prem Pckg 230 Miles Nav Roof Flawless on 2040-cars

Auto blog

BMW brings first diesel 7 Series to US with $82,500* 740Ld xDrive

After almost 40 years on the market, there are probably few things the BMW 7 Series hasn't offered, but when it comes to the US market, one of those things just happens to be a diesel engine. That is all about to change, however, as BMW announced that it will unveil the 2014 740Ld xDrive at the Chicago Auto Show before sales commence later in the spring.
Offered only on long-wheelbase models with standard all-wheel drive, the new diesel 7 is powered by BMW's 3.0-liter inline-six producing 255 horsepower and a stout 413 pound-feet of torque peaking between 1,500 and 3,000 rpm. While BMW has yet to release any type of fuel economy figures, it did say that its diesel technology is usually good for an improvement of 25 to 30 percent over the gas models - just for fun, that means that the 740 Ld xDrive could get as much as 24.7 miles per gallon in the city and 36.4 mpg on the highway, but that's just doing the math and there is nothing official behind those numbers. Acceleration will take a little longer than in the 740Li xDrive (shown above) with BMW stating 6.1 seconds from 0-60 compared to 5.4 seconds for the gas model.
Another small increase over the gas version will be in price, with the 740Ld xDrive getting a starting MSRP of $82,500 (*not including $925 for destination), which is just a $1,500 bump over the 740Li xDrive. For comparison, the Audi A8L TDI starts at $78,800, while the previous-gen Mercedes S350 Bluetec was priced at $93,000. Scroll down for more info on the new diesel-powered 7 Series, and stay tuned to our live coverage from Chicago in a couple weeks as we'll have live images and hopefully more info.

BMW M3, M4 let loose on the 'Ring

We just posted our first drive of the 2014 BMW 435i yesterday, but for those wanting even more power from this stylish coupe, help is on the way. From the sounds of it, BMW will be showing off a production-ready concept previewing the M4 next month at the Pebble Beach Concours d'Elegance, but until then, we have some new spy shots of the performance coupe being tested at the Nürburgring, along with its four-door counterpart, the M3.
Despite all the camouflage, it doesn't take much imagination to picture what both cars will look like, since we can clearly see the more aggressive front fascia and beefier brake setup. One interesting element we see on both cars is a double bubble roof that is almost certainly made from carbon fiber. Based on our report earlier, both the M4 Coupe and M3 Sedan are expected to debut at the 2014 Detroit Auto Show.

2013 Dinan S3 BMW 550i

Steve Dinan has been enhancing BMW models since 1979. But don't throw his company into the ring with the dozen or so other tuners who tweak, tinker and piggyback upgrades on the famed German marque. Dinan is a tuner, but it's also an engineering firm that writes its own software, builds its own parts and then backs everything it does with a factory-grade warranty. That sort of fastidiousness comes at a price, but most of its customers - including the powerhouse of BMW Motorsport - rely on Dinan to help them come out on top.
In stock form, BMW's 550i is a formidable four-door with a twin-turbocharged 4.4-liter V8 rated at 400 horsepower and 450 pound-feet of torque. While those figures allow it to run with quick company (0-60 in 5.0 seconds, according to the automaker), Dinan puts the sedan's kettle on full boil with its S3 package. Starting with the engine, the performance engineering firm bolts on larger turbochargers, air-to-water intercoolers, a trick strut tower brace cold air intake, a quad-pipe free flow exhaust and its own engine management software. Pump in some premium fuel, and the result is 542 horsepower and 587 pound-feet of torque. Power is sent through the stock eight-speed automatic to a limited slip rear differential (Dinan will upgrade xDrive all-wheel drive models, too).
The Dinan S3 also features and extensive suspension upgrade that includes new front camber arms and low compliance rear control arms (engineered to reduce understeer and improve turn-in). The stock dampers are retained, but new bump stops are installed along with new springs. Overall, the car rides about a half-inch lower than stock to improve roll rate. To reduce unsprung weight, forged 20-inch HRE Performance wheels are fitted at all four corners (wearing Michelin Pilot Super Sport tires - 275/35ZR20 up front and 295/35ZR20 in the rear). Lastly, the company remaps the factory Electronic Damper Control (EDC) software with its own Dinan Shockware to work in conjunction with the new enhancements.