2011 Bmw M3 on 2040-cars

Auto blog

BMW shows off 245-hp, hydrogen-powered 5 Series GT

With BMW's Innovation Days 2015 underway, the German luxury brand is showing off its latest piece of hydrogen-fuel-cell technology. Based in a 5 Series Gran Turismo, the system Í– co-developed with Toyota – promises to deliver on the promise of zero-emissions motoring, without the lengthy recharge times associated with plug-in electric vehicles. At the heart of BMW's latest FCV prototype is a new electric motor derived from the i sub-brand. It produces the equivalent of 245 horsepower, making it roughly comparable in output to the brand's latest 2.0-liter, turbocharged, four-cylinder gas engines. It draws its fuel from a hydrogen fuel tank that sits between the axles. The BMW-patented storage system can hold enough compressed hydrogen to take the hunchbacked 5 Series 300 miles before refueling. BMW and Toyota first inked their FCV partnership back in 2013, with the goal of having "an initial group of approved components ready by 2020," and sales beginning at some point in the next decade. While Toyota has been touting its successes with hydrogen in the form of the new Mirai, this 5 Series marks the first time since the agreement was signed that the German company rolled out one of its hydrogen-powered cars to the public. Check out the 5 Series GT fuel-cell vehicle in the gallery up top, and then scroll down for the official press release from BMW. Long range, short refuelling times, zero emissions: Hydrogen fuel cell drive system points the way to the future of BMW eDrive technology. As part of its research and predevelopment work in the area of drive technology, the BMW Group has focused on the use of hydrogen as an energy source for more than 30 years now. In 2006 the first luxury sedan for everyday use to be powered by a hydrogen combustion engine was unveiled – the BMW Hydrogen 7. And more than 15 years ago the BMW Group also began to direct its spotlight onto hydrogen fuel cell drive systems. A constant stream of significant advances – in terms of energy efficiency, performance capability and everyday practicality – have likewise been made with this technology, which converts hydrogen into power for an electric drive system, rather than burning it inside the engine. The results of the research and development activities in the field of hydrogen fuel cell drive systems will be presented in driving demonstrations for the first time during the BMW Group Innovation Days 2015.

BMW Z4 and Toyota Supra replacement spied in the snow

The new BMW Z4 and Toyota Supra will be the fruit of a marriage of convenience, born from the former's chassis and powertrain expertise and the latter's giant coffers full of money. The final product, spied testing in frigid temperatures in parts unknown, will have specific bodies depending on which brand it carries, so it won't be a simple rebadging exercise. This mule sports a softtop, rather than a retractable hardtop like the existing Z4. Whether this represents a final decision about what type of roof will be fitted to the production model is unclear. What we have heard, repeatedly, is that the chassis and the entire driveline will be pure BMW for both models, and that the main difference will be brand-specific sheetmetal. There are even rumors that an all-wheel-drive version will be available, or that the model will be available as a hybrid using Toyota's expertise in that arena. It's been a long wait since the memorandum of understanding that lead to the mule you see above was signed in 2012, and we had expected an announcement that the roadster would go into production by the end of 2015, but that time has come and gone. Perhaps we'll find out more at one of the upcoming auto shows. Geneva is coming up in March, after all.

BMW reveals updated 2016 Alpina B6 xDrive Gran Coupe

Do you dig the BMW M6 Gran Coupe, but really wanted one with all-wheel drive? We can hardly blame you, considering how well it held up against the Nissan GT-R and Bentley Continental GT in the Australian Outback on a recent episode of Top Gear, despite the disadvantage on driven-wheel count. But that, you see, is where Alpina comes in. The "other M division" offers the a twin-turbo 6 Series Gran Coupe with four-wheel traction – even here in the US – and it's just been upgraded. The 2016 BMW Alpina B6 xDrive Gran Coupe packs a 4.4-liter twin-turbo V8 engine, just like the M6. But whereas the previous B6 packed less power than its factory counterpart, the new one surpasses it. Thanks to a boost by 60 horsepower and 50 pound-feet of torque, the B6 now cranks out 600 hp and 590 lb-ft – which rather impressively bests the M6 by 40 hp and 90 lb-ft. Plus it's driven to all four wheels. The manufacturer says that's good for a tenth of a second off the 0-60 time, now quoted at 3.6 seconds, with a top speed pegged at 200 miles per hour, making this the fastest Alpina ever offered. The 2016 B6 also benefits from new headlamps, upgraded brakes and reshaped aerodynamic elements, but it's mostly the power boost that makes this the quickest Alpina off the line in the company's history. Related Video: THE NEW BMW ALPINA B6 XDRIVE GRAN COUPE Enhancements for 2016 model year deliver more power and refinement than ever. Woodcliff Lake, N.J. –February 11, 2015... The new 2016 model year BMW ALPINA B6 xDrive Gran Coupe gains subtle BMW enhancements and benefits in particular from the results of continuous development by ALPINA. The four-door Gran Coupe, already widely recognized for aesthetic beauty and impressive driving performance, raises the benchmark with exciting new details. The new BMW ALPINA B6 xDrive Gran Coupe will become available to order starting in March 2015, with US deliveries slated to begin at BMW Centers in June. Pricing will be announced closer to the on-sale date. The BMW ALPINA B6 xDrive Gran Coupe is available as a special-order vehicle with capacity-limited production underscoring its exclusivity. The B6's body is manufactured in the BMW 6 Series factory (Plant Dingolfing) and hand-finished with the remaining ALPINA components at the ALPINA factory in Buchloe, Germany. The hand-finishing sequence at ALPINA increases the production lead-time by approximately two weeks.