2001 E46 Titanium Silver Manual M3 on 2040-cars

Auto blog

BMW puts a sheep in wolf's clothing with 2 Series Active Tourer M Sport

BMW is charting new territory with the 2 Series. No, not the two-door model - that's just the kind of rear-drive coupe for which the brand is known. But the Active Tourer (which only shares its series designation with the coupe) is a front-drive tall hatchback/MPV category buster, and that's not exactly what comes to mind when you think of Bimmers. As such, the 2 Series Active Tourer is bound to turn off some of the brand's faithful, but this latest M Sport kit could at least ease the pain somewhat.
The sport package for the Active Tourer packs all the usual suspects: a more aggressive aero kit, retuned suspension, blacked-out grille, 17- or 18-inch alloys and an interior with sports seats trimmed in blue-stitched Alcantara. Top all that off with an Estoril Blue paint job and you've got a compact family hauler that might look the part, and maybe handle a bit tighter, yet it naturally stops short of the full M treatment (or even an M Performance spec like you'd find in the M235i coupe). All of which is probably just as well, because that might be the only thing BMW purists would object to more than the existence of a front-drive BMW MPV in the first place.

BMW 1 Series prototype packs direct water injection

Just a few months ago, BMW showcased an M4 that was modified to serve as the safety car for the MotoGP racing series. The flashing lights and emergency equipment, however, weren't the only modifications BMW made to the performance coupe. It also packed an innovative new water injection system. And now it's furthering the development of that system by running it in a 1 Series hatchback as well. Revealed at the BMW Group Innovation Days 2015 event, this five-door 1 Series packs a three-cylinder gasoline engine – like the one found in a Mini or i8 – but fitted with the direct water injection system. In this application, the system sprays a fine mist of water – yep, regular old H2O – right into the combustion chamber. While mixing water with gasoline normally wouldn't be recommended, in this case it evaporates immediately and helps cool the engine from the inside, allowing it to run at higher efficiency. That cooler running engine brings with it several benefits. It delivers improved fuel economy and lower emissions, to start. It also allows for an earlier ignition point, higher compression ratio, and higher boost pressure in turbocharged engines, delivering increased output. It even cuts down on engine knocking (where combustion occurs spontaneously), reduces wear and tear on the engine, and makes better use of lower octane levels. If that sounds like a win-win-win... win (we're losing count of all the wins here), it's because BMW just may be on to something. Of course it does require a water tank to be fitted on board, which means added weight, but instead of requiring the driver fill up the water tank, BMW has fitted this prototype with a system that replenishes the water level from the air conditioning system when the vehicle is switched off. So unless it's being driven in a particularly extreme climate, it doesn't even need topping up. Add one more "win" to the list, then. Extra power, improved real-world fuel economy: Direct water injection enhances efficiency. With direct water injection for turbocharged petrol engines, the BMW Group has again succeeded in enhancing the capabilities of conventional engine technology through an ongoing process of refinement and improvement. The precisely controlled injection of water into the engine cylinders produces a cooling effect that boosts power and torque, particularly when operating at or near full throttle, while at the same time reducing fuel consumption and emissions.

BMW plugs in new X5 xDrive40e PHEV crossover

BMW broke with its own convention when it rolled out the original X5 back in 1999, and did it again when it launched the i3 and i8 plug-in hybrids in 2013. Now it's bringing the two together with the reveal of the new X5 xDrive40e. Based on the third-generation F15 model and previewed by the X5 eDrive concept at the 2013 Frankfurt Motor Show, the X5 xDrive40e is the first PHEV from the core BMW brand. Its hybrid powertrain pairs a 2.0-liter turbo four (itself good for 245 horsepower and 258 pound-feet of torque) to an electric motor integrated into the eight-speed automatic transmission (contributing another 113 hp and 184 lb-ft) for a total combined output of 313 hp and 332 lb-ft. That makes it more powerful by both counts than the six-cylinder X5 xDrive35i (though considerably less so than the V8-powered xDrive50i), giving it a quoted 0-62 time of 6.8 seconds and an electronically limited top speed of 130 mph. But it can travel up to 19 miles on electric power alone, at which top speed is limited to 75 mph. BMW has mounted the 9-kWh lithium-ion battery pack underneath the luggage floor, limiting cargo capacity to between 17.65 and 60.7 cubic feet, depending on how you set up the rear seats. An adaptive suspension keeps it all on an even keel, with power transmitted to all four wheels through a permanent all-wheel-drive system. An M model it is not, but the Bavarian automaker will offer it with an M Sport package. Full details on pricing and availability have yet to be announced, but the X5 xDrive40e is set to hit European dealers in the fall. The BMW X5 xDrive40e The first plug-in hybrid production car from the BMW core brand is a Sports Activity Vehicle. Permanent all-wheel drive and the BMW EfficientDynamics eDrive technology endow the BMW X5 xDrive40e with sensational sportiness and supreme poise on the one hand and outstanding efficiency on the other. With a total system output of 230 kW/313 hp generated by a four-cylinder petrol engine with BMW TwinPower Turbo technology and a synchronous electric motor, the BMW X5 xDrive40e achieves a combined fuel consumption of 3.4 – 3.3 litres per 100 kilometres (83.1 – 85.6 mpg imp) and a combined electricity consumption of 15.4 – 15.3 kWh over the same distance. CO2 emissions come in at 78 – 77 grams per kilometre (figures according to EU test cycle for plug-in hybrid vehicles, may vary depending on the tyre format specified).