1991 Bmw M3 on 2040-cars

Auto blog

2016 BMW X1 First Drive [w/video]

Perhaps more than any other model, the X1 exemplifies the shift going on at BMW. That the X1 is the first front-drive-based car to wear the BMW badge in the US is both remarkable and doesn't matter at all. Some background: The first X1, sold here for the latter half of its six-year run, was an Old BMW. Based on E90 3 Series underpinnings, it was basically a tall, last-gen 3 wagon, a car on short stilts. We loved it. It drove almost exactly like a good 3 Series at a time when that 3 Series was no longer available. It sold in okay numbers. It's gone now. This new X1, the 2016 model, is a sort of about face, or at least a right-hand turn in the engine compartment. This is New BMW. The base engine is again a 2.0-liter four-cylinder, a new design based on the company's modular engine architecture that can spit out threes, fours, and sixes using the same component set. It's mounted transversely, not longitudinally like in the rest of BMW's US offerings. It loses some horsepower to the last X1's 2.0 (228 hp versus 240) and a bit of torque (258 lb-ft down from 260). Again, few will notice. The optional 3.0-liter turbocharged six from the last generation is gone. Not many customers chose it, and the six likely wouldn't fit under the hood of this rearranged X1. EPA fuel-economy numbers match those from the 2015 xDrive28i exactly – 22 mpg city, 32 highway – so no gains there. So packaging won. There's really no other explanation for the longitudinal-transverse swap, except that maybe it's less expensive to build this way. EPA fuel-economy numbers match those from the 2015 xDrive28i exactly – 22 mpg city, 32 highway – so no gains there. But the packaging advantages are abundant. The interior is somewhat narrow, but it's opened up a bit by the lack of a transmission tunnel that would normally eat space between the front occupants. Instead, the center console is set low, with a tall shift lever rising practically from the floor up to meet your hand. There's storage forward of the shifter and a folding center armrest that opens for small items. The original X1 was sold here with rear-wheel as well as all-wheel drive. For obvious reasons, that won't be the case this time around. BMW also won't sell a front-drive model here (although one is offered in Europe and elsewhere) likely because it would involve the admission that this is not your average BMW, but instead a New BMW, one designed for more people and fewer enthusiasts.

BMW i3 officially gets EPA-rated 81-mile range, delivered to first US customer

It's official. The first U.S. BMW i3 customer is now happily zipping along somewhere in his new car. Or possibly staring lovingly at it in his garage – we're not sure which. That man, Tufts University professor and electric vehicle aficionado Charles Rabie, was handed the keys at the BMW of Boston dealership earlier today, thus beginning a flood of upcoming deliveries from the pool of hundreds currently awaiting for their owners at the Port Jersey Vehicle Distribution Center in Jersey City, NJ. And now, when Mr. Rabie sets off in his spiffy electric Bimmer, he'll know exactly how far the EPA thinks he can go on a full charge of its 22-kWh battery. Speaking with Dave Buchko from BMW Corporate Communications, we learned the government agency has given the i3 an official range rating of 81 miles. Efficiency-wise, that breaks down to 138 MPGe city, 111 hwy, and 124 combined for the city car. Of course, we don't expect the good professor to experience any difficulties dealing with the sub-100 mile range. As a former BMW ActiveE driver, he's had plenty of opportunity to become accustomed to the foibles (and advantages) of piloting a battery-powered vehicle. You can read our First Drive impression of the BMW i3 here. Scroll down for the official press release. BMW Delivers First All-Electric i3 in the U.S. Tufts University professor of practice Charles Rabie to receive the first U.S. BMW i3. Woodcliff Lake, NJ – May 2, 2014... Today, BMW delivered the first all-electric BMW i3 in the U.S. to Boston resident and Tufts University professor of practice Charles Rabie at the BMW of Boston dealership. Hundreds of BMW i3 vehicles are currently at U.S. facilities and ready to be delivered to customers nationwide, ushering in a new era of electromobility. Rabie is an electric vehicle advocate and has been driving the BMW ActiveE since 2012. Also among this first group set to receive a BMW i3 is Los Angeles-based former E! Entertainment leading correspondent Ashlan Gorse Cousteau, married to renowned documentary filmmaker and environmentalist Philippe Cousteau, grandson of Jacques Cousteau. "Today marks a big day at BMW of North America - What started out as a dream for an innovative sustainable vehicle under the BMW i brand can now be found on streets across the U.S.," said Ludwig Willisch, President & CEO, BMW of North America. The BMW i3 is the first of the BMW i vehicles constructed from the ground up primarily of carbon fiber to enter the U.S. market.

BMW to offer carbon fiber wheels in a year or two

The Citroën SM sat on the first set of production glass fiber and resin wheels in 1972 when parent company Michelin developed the exotic hoops in order to take the SM rallying. It wasn't until 2008 that we got the first all-carbon-fiber wheel for passenger cars in the form of a prototype model from Weds Sports in Japan that remained a prototype. Australian company Carbon Revolution followed that a year later with its CR-9 all-CF wheel, first introduced on the Shelby Ultimate Aero and now available for independent purchase for about $15,000 per set. BMW could be the first OEM to offer entire wheels in carbon fiber reinforced plastic in two years.
The wheels - either all-CFRP or using a CFRP rim and alloy spokes - were shown off during BMW's Innovation Days in Munich and are products of the development work done on its i-branded cars. The full-CFRP wheel is 35-percent lighter than a forged alloy wheel, the hybrid alloy and CFRP wheel is 25-percent lighter, making for a decent drop in unsprung rotating weight. As demonstrators during a tech day the wheels aren't yet in the pipeline for production and EU approval, but an article in Auto Express claims that they could be on the market as soon as two years from now.
Other possible parts include a full carbon fiber steering wheel and propeller shaft, the latter of which is coming as a single-piece component on the new M3 and M4. BMW is also talking up its use of secondary carbon fiber - waste material from i3 and i8 production - that can be used for items like IP support structures, seat frames and spare wheels in place of traditional metals like aluminum and magnesium. There's an excerpt of the Innovation Day press release below with more details.