M Roadster on 2040-cars

Auto blog

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.

BMW and Roland Sands show off Concept 101 custom bagger

Though BMW may not be the first motorcycle manufacturer that comes to mind when you think of cruisers, that's precisely what the German marque has unveiled – in concept form at least – at the Concorso d'Eleganza Villa d'Este this year. Appearing alongside the 3.0 CSL Hommage concept, the BMW Concept 101 is a custom "bagger" created in California through a collaboration between BMW Motorrad, BMW Designworks, and legendary bike builder Roland Sands. Better suited towards cruising down the highway than carving up a racetrack or a dirt trail, the Concept 101 strikes a rather stunning (if uncharacteristic) form. The elongated shape is rendered in materials like brushed aluminum, carbon fiber, and wood trim, tapering towards the rear that encompasses two hard saddle bags characteristic of this style of cruiser. The top half of the bike is done up in lighter shades than the dark bottom, capped by a saddle crafted in fine-grain black leather, perforated black leather and a strip of brown leather. Power comes commandingly from an inline-six displacing 1.6 liters – or about 101 cubic inches, which along with Highway 101, gives the concept bike its name. The engine breaths out through a pair of tailpipes, each with three outlets to emphasize the six-cylinder and envision what it would look like if Munich opted to take on the Honda Gold Wing F6C Valkyrie. Of course this isn't the first time BMW has done a bike with Roland Sands, nor the first time it's displaying a bike concept at Villa d'Este. Last year the German marque displayed the Concept Roadster at the same show, and did the Concept Ninety with the same custom shop at the previous year's concours. BMW Motorrad "Concept 101" - The Spirit of the Open Road. Munich/Cernobbio. Every year, the most impressive representatives of the mobile past and future on both two and four wheels assemble at the Concorso d'Eleganza Villa d'Este for a very special get-together on the shores of Lake Como. Amid this extraordinary blend of the traditional and the contemporary, BMW Motorrad once again presents a breathtaking concept study: the BMW Motorrad "Concept 101". "The Concept 101 opens up a new chapter in the history of our concept bikes. It is the BMW Motorrad interpretation of endless highways and the dream of freedom and independence - the perfect embodiment of "American touring". Designing this big touring bike study was amazingly exciting for us because we haven't been involved with a motorcycle concept like this before.

BMW Shanghai: Driving in mega cities, designing the future and more

The BMW enclave is a suitable mix of high-tech and throwback cool.
A few days before the Shanghai Motor Show kicked off, we were part of an international group of media that was invited to have a look at the BMW Designworks Shanghai Studio and ConnectedDrive Lab facility. The building that BMW found to house its Chinese think tank is in a lovely part of Shanghai known as the former French Concession. The late 1890s and early 1900s French architectural style, brick-paved streets and tree-lined spaces feel a world apart from the ultra-modern heart of Shanghai, and the BMW enclave is a suitable mix of high-tech and throwback cool.