1997 Bmw 7-series on 2040-cars

Auto blog

2015 BMW M4 Convertible is here to put wind in your sails

Each generation of the BMW M3 has included a convertible model. Even the distant E30, the patriarch of the M3 line, had an ultra-rare (only 787 were built) droptop model. The convertible became more common on the successive generations, with the hardtop-convertible E93 being the most recent. Considering this history, there seemed very little doubt that as the M3 became the M4, a convertible would be in the cards. Now, the new droptop has arrived.
Set for its global debut at the 2014 New York Auto Show, the 2015 BMW M4 Convertible features, like its forbearers, everything that's great about the hardtop variant while adding an unlimited amount of head room. That means the same 3.0-liter, 425-horsepower, 406-pound-foot, twin-turbocharged straight six sits under its domed hood, while either a six-speed stick or a seven-speed M dual-clutch transmission dispatches power to the fat rear tires.
As for specific differences between the hardtop and the new convertible, obviously, the droptop is heavier. A lot heavier. Where an M4 with a six-speed manual tips the scales at 3,530 pounds, the M4 Convertible weighs in at 4,055 pounds. Believe it or not, BMW has actually trimmed 90 pounds from the last-generation M3 convertible, code-named E93. This marginal weight reduction from the third-generation convertible to the fourth is barely half of the 174 pounds BMW was able to subtract when transitioning from M3 Coupe to M4 Coupe.

BMW confirms new Mexican plant

After over a year of speculation, BMW is finally officially announcing that it's building a factory in Mexico. The new plant will cost the German automaker roughly $1 billion US and will have a capacity of about 150,000 vehicles a year when complete. However, production won't begin there until 2019.
The new factory is being built near the city of San Luis Potosí, Mexico, with plans to employ about 1,500 people. Unfortunately, BMW is still mum about which models it's producing south of the border. Earlier rumors indicated the possibility of the 3 Series, 1 Series and maybe even Mini models there.
BMW says Mexico's multiple free trade agreements are a major factor in the choice of location of the plant. They make it possible for the automaker to ship models more cheaply to North America, parts of South America and the European Union. "The Americas are among the most important growth markets for the BMW Group. We are continuing our strategy of 'production follows the market,'" said Harald Krueger, the board's head of production, in the company's official announcement.

BMW unleashes 160-hp S 1000 R streetfighter motorcycle

BMW Motorrad released the S 1000 RR superbike in 2010, but for those who'd like to take it down a (small) notch, the German motorcycle maker introduced the 2014 S 1000 R, a slightly less-ballsy version of the range-topping superbike, at EICMA on Tuesday.
In its transformation from 193-horsepower superbike to 160-hp sportbike, BMW detuned the 999cc inline four-cylinder engine a bit by lowering the redline from 13,000 RPM to 11,000 RPM, where peak power is made. Torque is rated at "approximately" 83 pound-feet (the RR makes 82.5 lb-ft), but more importantly, engineers tweaked the torque delivery in the R's favor by redesigning the cylinder-head ducts, modifying the camshaft profiles and reprogramming the engine management system. The result is seven lb-ft more torque than the RR up to 7,500 RPM. The R's torque peak occurs at 9,250 RPM.
The bike comes standard with ASC (automatic stability control) and "Race" ABS. Riders can choose between two modes, "Road" and "Rain," which adjust ABS and ASC settings to suit dry or wet roads. DTC (dynamic traction control) is available as an option, and with two modes, "Dynamic" and "Dynamic Pro," the system optimizes traction and helps riders achieve maximum acceleration.