530xi Sedan Awd Auto Cd Heated Leather Sunroof Only 13k Miles 1 Owner Must See!! on 2040-cars

Auto blog

2015 BMW X6 keeps it weird

Say what you will about the BMW X6 - odd and ugly as it may be, it's actually been sort of successful for the German automaker. BMW has now sold some 250,000 examples of the X6 since its launch, and the company's fastback-crossover-coupe-whatever-thing gets a host of meaningful updates for the 2015 model year while not straying from its original mission.
Aside from its revised styling, most noticeably set apart by its larger, X5-inspired headlamps, the biggest update for the US-spec X6 is the addition of a rear-wheel-drive model, the sDrive35i. This trim joins the all-wheel-drive xDrive35i and xDrive50i, and since you should all be capable of decoding BMW's weird naming structure by now, you know this means the X6 will be offered with a choice of 3.0-liter turbocharged six-cylinder and twin-turbo 4.4-liter V8 engines. Fuel economy figures have not been released yet, but BMW says the new powertrains are more efficient than before, mated exclusively to an eight-speed automatic transmission regardless of cylinder count.
Look for the updated X6 to hit US showrooms this fall, following its debut this week in Paris. Expect pricing to be revealed closer to the model's on-sale date. Have a look below for all of the details.

BMW i3 gets official worldwide

Even though we recently drove a near-production version of the BMW i3, the car still wore light exterior and interior camouflage. Today, BMW took off that little bit of camo and made a big announcement: The i3 will go on sale in the US for $41,350 in the second quarter of 2014. That does not include any state or federal incentives that could lower the price or the $925 destination fee. The i3 will debut with three trim levels, which BMW is referring to as Worlds: Mega (standard in the US), Giga and Tera.
The BMW i3 is chock-full of new technology afforded by its design as an EV from the start of development, which has resulted in a vehicle layout unique to the i3. BMW has named it LifeDrive architecture, and it features the Life Module and the Drive Module. The Life Module is the i3's pillar-less passenger cell, which is the first mass-produced monocoque made of carbon fiber reinforced plastic (CFRP). The tougher-than-steel material is also 30-percent lighter than aluminum, which contributes to the i3's relatively light weight of 2,700 pounds (preliminary US figure) and, in turn, increases its energy efficiency. Expect more of this technology to find its way into future BMWs.
The Drive Module, a 100-percent aluminum chassis mounted under the Life Module, houses everything that makes the i3 go. It includes the 22-kilowatt, 450-pound lithium ion battery mounted as centrally as possible, and provides power to a rear-mounted electric motor that turns the rear wheels. With 170 horsepower and 184 pound-feet of torque from zero rpm, the single-gear i3 can accelerate from 0-30 miles per hour in 3.5 seconds and 0-60 mph in about 7.0 seconds, but it has a top speed of only 93 mph. BMW says the i3 has a real-world EV range of 80-100 miles, and the standard charger can fill the battery in three hours. Opt for the SAE DC Combo Fast Charger and 30 minutes is all it takes for a full charge; 20 minutes will bump the battery to 80 percent. For customers who have range anxiety, BMW gives them the option to install a 34-hp, 650cc two-cylinder generator as a range extender for the electric drive system.

BMW discussing supercar collaboration with McLaren

BMW is reportedly considering a new halo supercar. But rather than go it alone, word has it that the Bavarian automaker is discussing a potential partnership with McLaren to make the idea a reality. This according to Britain's Car magazine, which suggests that negotiations are well underway. The proposal would see the BMW supercar based on the same architecture that will to underpin Woking's P16 project that's set to replace current 650S. Rather than use the 3.8-liter twin-turbo V8 that McLaren developed together with Ricardo, the Bimmer version would use Munich's own engine: a 4.0-liter V8 with quad turbochargers – two conventional spools and two more electrically driven chargers. Their combined effect would net an expected 750 horsepower. Further differentiations on McLaren's carbon monocoque architecture for use in the BMW would include custom bodywork, aerodynamics, and interior fitments to include a unique instrument panel. Production, however, would be handled at the McLaren Production Centre in Woking, to the tune of several hundred units per year. The project would take the place of several aborted programs undertaken internally at BMW. One called for an entirely unique supercar developed in-house, referred to internally as the M100. When that project was aborted so that BMW could concentrate on the i sub-brand, BMW's own skunkworks shifted its focus to developing a more performance-focused version of the i8, known by some as the i8 CSi. When that project was canned as well, discussions with McLaren commenced. It wouldn't be the first time BMW would outsource development of its own supercar, or even the first time BMW would collaborate with McLaren on such a project. Initial development work on the original M1 in the 1970s was undertaken by Lamborghini before being taken in-house. And, of course, BMW provided the engine for the legendary McLaren F1. Meanwhile McLaren performed a similar function for Mercedes-Benz with the SLR, demonstrating Woking's experience in building flagship supercars for German automakers. This latest project could suffer the same fate as the M100 and i8 CSi programs. But if it is approved, it could yield both coupe and convertible versions, with the first slated to surface at the Frankfurt Motor Show in 2017 and reach dealerships in 2019.