2011 Bmw 550i Twin-turbo Dinan Stage 1 Sunroof Nav Hud! Texas Direct Auto on 2040-cars

Auto blog

BMW planning smaller Z2 roadster

It's been a few years since we heard about the BMW Z2, a compact, two-seat convertible that would slot in below the aging Z4 (shown above). Now, though, the crew at Car and Driver are back with details on the oft-rumored roadster.
The big shock for enthusiasts on this one is C/D's report that the Z2 will spin its front wheels, rather than its rears. A front-drive roadster is strange enough, but a front-drive BMW roadster? It's apparently true, though, as the new model would share its platform with the front-drive Mini and 2 Series Active Tourer rather than with the racier 228i or M235i coupes.
According to C/D, the rumored Z2 could be powered by a range of three- and four-cylinder, turbocharged engines, although it's more likely to be a four-only affair. Power should range from 160 to 230 ponies, while an M variant could arrive with 300 horsepower (that's a whole lot of power for front-wheel drive...).

Mini Cooper SE Convertible wheels made entirely from recycled aluminum

Mini has revealed an interesting fact about its limited-run Mini Cooper SE Convertible: It's the first production car with wheels made from 100% recycled aluminum. Despite sharing the same look as wheels available on the regular SE hatch, they're actually much more environmentally friendly. The wheels were developed with Swiss wheel manufacturer Ronal. The company sells aftermarket wheels under the Ronal and Speedline brands, and it supplies OEMs. And it's no stranger to more environmentally-friendly wheel production. It supplies wheels for the Audi E-Tron GT that are made using a smelting process that produces oxygen rather than carbon dioxide, and it now has a line of claimed carbon-neutral aftermarket wheels. But back to the Mini's wheels. Using all recycled aluminum has the obvious benefit of not requiring new aluminum to be manufactured. But the benefits are greater than just the raw material use. Mini points out that a major improvement in carbon emissions comes from being able to skip the electrolysis process for new aluminum manufacturing. Pure aluminum is extracted from aluminum oxide (which is in turn taken from the mineral bauxite). To do this large amounts of electricity are passed through molten solutions of aluminum oxide and cryolite (which takes energy to heat) across graphite cathodes and annodes. Not only does this use a lot of electricity that has its own carbon costs, the oxygen that separates from the aluminum bonds to the graphite annodes, yielding more carbon dioxide (which is why the production of those Audi wheels is also interesting). In total, Mini says the recycled wheel production reduces carbon emissions by 75%. More specifically, it estimates about 0.16 kilograms (0.35 pounds) per kilogram (2.2 pounds) of aluminum used. Mini also stresses that this process still maintains all the strength of conventional wheels, just in a greener way. And of course, the wheels themselves are recyclable again. Mini, and BMW more broadly, are looking at ways to upscale the process and to source suitable recyclable products, likely other old wheels from cars no longer on the road. Though neither company said anything about when we'll see fully recycled wheels more widely available. Related Video: MINI Electric Pacesetter inside and out

2016 BMW M3 and M4 recalled for driveshaft problem

The Basics: BMW is recalling 42 examples of the 2015-2016 M3 built from May 30, 2015, to September 2, 2015; the 2016 M4 Coupe made from July 3, 2015, to September 11, 2015; and the 2015-2016 M4 Convertible manufactured from May 29, 2015, to August 4, 2015. The Problem: The company might not have filled a driveshaft slip joint with grease, and the part can potentially fail over time. If this happens, the vehicles could lose power to the rear axle. Injuries/Deaths: None reported. The Fix: BMW dealers will inspect the driveshaft and replace it as necessary. If You Own One: BMW will begin the recall on January 8, 2016. An FAQ (as a PDF) says the vehicles are still safe to drive. More Information: BMW issued two other recalls for similar models this year. An airbag problem prompted a campaign for 2,067 examples of the 4 Series Convertible in March. A fuel pump issue in April also forced repairs to the 3 and 4 Series, in addition to the 2 Series. RECALL Subject : Driveshaft Slip-Joint may not have been Greased Report Receipt Date: NOV 23, 2015 NHTSA Campaign Number: 15V782000 Component(s): POWER TRAIN Potential Number of Units Affected: 42 All Products Associated with this Recall Vehicle Make Model Model Year(s) BMW M3 2015-2016 BMW M4 2015-2016 Details Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2015-2016 M3 Sedan vehicles manufactured May 30, 2015, to September 2, 2015, 2016 M4 Coupe vehicles manufactured July 3, 2015, to September 11, 2015, and 2015-2016 M4 Convertible vehicles manufactured May 29, 2015, to August 4, 2015. The affected vehicles have a driveshaft with a slip-joint that may not have been filled with grease. As a result, the slip-joint may fail over time. CONSEQUENCE: If the slip-joint fails, there would be a loss of power to the rear axle and therefore the vehicle would stop moving, increasing the risk of a crash. REMEDY: BMW will notify owners, and dealers will inspect the driveshaft, replacing it as necessary, free of charge. The recall is expected to begin January 8, 2016. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.