2006 Bmw 530i: Sport, Premium, Xenons, Park Distance, Offered By Mercedes Dealer on 2040-cars

Auto blog

BMW patents strange three-cylinder pushrod engines, perhaps for cruiser motorcycle

For decades BMW's motorcycles were easily identified by the two opposed cylinders sticking out of each side of the bike. While you can still find this layout on some of its products, these days the company also uses a variety of other layouts, depending on the model line. Based on European patents, there might even be a Bimmer in the ranks eventually with an absolutely bizarre-looking W3 configuration. BMW actually has two separate patents on these W3 designs, and both of them have the goal of cramming three cylinders into the space of a traditional V-twin. The first splays the cylinder out into a fan shape with pushrods operating the valves. The description submitted to the World Intellectual Property Organization describes the solution as, "The embodiment according to the invention represents an as of yet unknown type of W-3 reciprocating piston internal combustion engine having cylinder angles which can be largely freely sized." The other solution is more of a modification to the traditional V-twin. Two of the cylinders share a crankpin, but the third has its own and is positioned inside the angle of the V. It's a very odd-looking engine. With BMW's assertion that these designs are meant to fit in place of a traditional V-twin, Jalopnik speculates that they could be for a future cruiser from the company, and that would make sense. While brand offers a line of sport tourers with the K1600 line, it doesn't have something more classic to take on the likes of the Ducati Diavel. Creating such a weird engine would probably grab early interest from riders.

BMW recalls over 76k 2012-2014 models over brake failure

Bimmerfest is reporting that BMW has notified the National Highway Traffic Safety Administration of its intention to voluntarily recall more than 75,000 3 Series, 5 Series, X1, X3 and Z4 models due to a possible loss of power brake assist that could result in the vehicles failing to stop. The recall affects 2012-2014 models equipped with either the N20 or N26 engine produced from May 2012 to August 2013. Until recall repairs have been performed, BMW dealers will discontinue selling or delivering any affected vehicles in their inventories.
The problem has been traced to restricted oil supply from the intake camshaft to the brake vacuum pump, which may cause the brake vacuum pump to fail, resulting in a loss of power brake assist. While the hydraulic brakes will still function, the driver must much apply greater pedal pressure and the distance required to stop the vehicle will increase.
BMW has reported three minor accidents with no confirmed injuries. According to Bimmerfest, drivers who encounter a braking problem should "pull the emergency brake and apply as much brake pedal pressure as possible. If your BMW has an electronic parking brake pull up and hold the switch to engage the brake." Drivers should then park in a safe location and contact BMW Roadside Assistance.

BMW mulled ten, eight, and six-cylinder engines for i8 before going hybrid

There's little doubt that the 2015 BMW i8 is one of the most radical and groundbreaking performance cars this industry has seen in a long time. From its unique carbon-intensive construction to its 1.5-liter, three-cylinder and electric motor plug-in powertrain to its concept-car appearance, the flagbearer for BMW's new i venture challenges the very notion of what it takes to be a supercar.
Yet apparently the i8 almost didn't do that at all. Yes, it probably still would've had innovative assembly techniques, serious performance and come-hither bodywork, but according to a new report in the Telegraaf, it was very nearly a much more conventional beast, drawing its power from a V10 engine. According to the report, that line of development never got much beyond the drawing board, but BMW engineers then shifted their focus to both V8 and six-cylinder motivation, going so far as to build prototype cars. The higher cylinder-count engines were eventually dropped altogether after BMW decided to turn the i8 into a hybrid, with the six-cylinder reportedly nixed due to heat management and weight issues. In the end, of course, BMW went with the PHEV powertrain that offers a total system output of 362 horsepower and 420 pound-feet of torque - plenty of thrust for this lightweight, all-wheel drive coupe while still enabling an incredible 94 miles to the gallon on the EU cycle. Regardless of how it turned out, it's still fascinating to think that BMW didn't have a much firmer conceptual idea of what it was after when it started the i8's development.
Here at Autoblog, we're genuinely thrilled about this new generation of greener hybrid super- and hypercars, a movement spearheaded by the i8, Porsche 918 Spyder, Ferrari LaFerrari and McLaren P1. But even so, our inner-gearheads can't help but wonder what might have been had BMW pursued a more conventional i8, either in place of, or in addition to, the car they did build. What do you think? Have your say in Comments.