1990 Bmw 525i on 2040-cars

Auto blog

The 2016 BMW M2 is a steroid-addled M235i [UPDATE]

UPDATE: As it turns out, BMW mixed up the weight specs in the official press materials. We spoke to BMW for confirmation, and the manual M2 weighs 3,450 pounds, the DCT car weighs 3,505. We've updated the text to reflect this. If you're looking for a featherweight M235i, you'll be disappointed. The extra power and goodies are offset by negligible weight savings. When we first got behind the wheel of the M235i early last year, BMW was quick to point out the spiritual link between the small quasi-M car and its ancestors, the 2002 Turbo and the E30 M3, but we couldn't help but think fondly of the more potent 1M Coupe. And while the M235i got a lot of things right, its weight and price took some of the shine off it. But more importantly, the intangibles that those older BMWs nailed was somewhat lacking in the M235i – while fun, it was somewhat distant, unlike the visceral 1M. Until we drive the 2016 BMW M2, those intangibles will remain intangible. But on paper, the M2 looks to be a super-M235i, buffed up with M goodies like an active rear differential and lightened suspension components. But if you're looking for a featherweight M235i, you'll be disappointed. The extra power and goodies are offset by negligible weight savings. With the manual it weighs 3,450 pounds, an 85-pound reduction. With the DCT, it's a wash at 3,505 pounds. At least the M2 looks like a proper M car. The side bodywork swells 2.1 inches up front and 3.1 inches in the rear to accommodate wide 19-inch forged wheels wrapped in Michelin Pilot Super Sport tires. The front end takes the M235i theme (itself an adrenaline-injected version of lesser 2 Series cars) and adds steroidal menace, with the expected larger intakes to feed the extra engine radiator. Out back, there's a diffuser in the rear tray that the M235i lacks, and the scallops that incorporate the taillights plainly telegraph the extra rear width. It's the M4's handsome younger sibling. Like the M235i to which its clearly related, the heart of the M2 is a 3.0-liter inline-six that inhales through a TwinScroll exhaust manifold-integrated turbocharger. High-precision direct injection, Double-VANOS, and Valvetronic are all present and accounted for, with some M goodies like pistons and crank bearings trickling down from the M3 and M4. The result is 365 horsepower at 6,500 rpm and 343 pound-feet of torque available from as low as 1,400 rpm.

BMW M3 and M4 will rock 430 hp from twin-turbo six with standard manual [w/video]

We're not sure which spec we're most intrigued by for the new BMW M3 and M4: the twin-turbo six-cylinder with 430 horsepower and "far beyond" 369 pound-feet of torque, the 3,300-pound curb weight or the standard six-speed manual transmission with automatic throttle blipping on downshifts. That engine is fitted with both Valvetronic and Double-Vanos, twin-wire arc-spray coating in the cylinders instead of liners to save weight, a track-ready cooling system with additional radiators, a forged crankshaft, dry-sump lubrication and a magnesium oil sump. BMW says its "high revving concept" has a redline beyond 7,500 rpm.
In the M4, it will be pulling a coupe with "a weight of just under 1,500 kilograms," which is 3,300 pounds to you and me. That number is said to include no driver and 90 percent fuel, but we're still waiting on the exact number and specs. BMW says it's "around 80 kilograms lighter than a comparably equipped predecessor model," putting the power-to-weight ratio at something like 7.68 pounds per horsepower at the same time as it helps reduce fuel consumption by 25 percent. The use of carbon fiber reinforced plastics (CFRP) for the roof, drive shaft (with no center bearing), trunk and front strut brace, and forged aluminum for suspension components, have aided in the weight loss. This time around, the sedan - the M3 - will also get a CFRP roof.
The default option will be a six-speed manual.

BMW readying Spartanburg expansion for X7 production

Prior to the debut of the original X5 in 1999, the idea of a BMW crossover might have seemed like heresy. But here we are, fifteen years removed from the Frank Stephenson-penned design, and the Bavarian automaker has expanded its crossover lineup to include the X1, X3, X4 and X6, and it's showing no sign of slowing down.
We recently reported that BMW is planning on slotting an X2 in at the bottom of the range between the X1 and X3, but now it's being widely reported that it's got an even larger one to put in at the top of its utility line. That, of course, would be the X7, a long-rumored three-row model that would give BMW a large family hauler to challenge the Mercedes-Benz GL.
According to The Wall Street Journal, BMW is expanding its assembly plant in Spartanburg, South Carolina, to accommodate production of the X7 alongside the X3, X4 and X5 that it already builds there for local consumption.