1976 Bmw 2002 Base Coupe 2-door 2.0l on 2040-cars
Apex, North Carolina, United States
Body Type:Coupe
Engine:2.0L 1990CC 121Cu. In. l4 GAS SOHC Naturally Aspirated
Vehicle Title:Clear
Fuel Type:GAS
For Sale By:Dealer
Year: 1976
Number of Cylinders: 4
Make: BMW
Model: 2002
Trim: Base Coupe 2-Door
Warranty: Vehicle does NOT have an existing warranty
Drive Type: RWD
Power Options: Air Conditioning
Mileage: 183,168
Exterior Color: Green
Interior Color: Tan
|
Good solid, Complete driver original California blue plates car! This is a head turner no matter will you go, Mintgrun paint with tan interior this 2002 stands out from all the other 02's on the road. 4 speed, 183K documented miles, wood steering wheel, 15" Superlite rims $700 (receipt) with new tires.
The good: Runs Well No rust California and Louisiana car since new- no rust Full records including engine replacement at 100k miles New etsy carpets New coco mats AC- not functioning (ok not functioning is bad, but AC is good) New bav auto springs New Blisten HDs (not installed) New ball joints New tie rod ends New shift linkage Original California blue plates car Weber 32/36 New Elec fan kit (uninstalled) Bosch flat headlights with PIAA bulbs Petronix clear glass good OEM headliner Comes with a trunk full of nisc. parts The Bad Repainted 2 years ago in proper acrylic enamel-poorly done. Roof needs to be repainted (didn't adhere good) Overall good 10ft paint job. A/C not working radio (original Becker) not working drivers floorpan was rusty and replaced with a diamond plate panel, No more rust, but not proper. Spare tire well has some small rust perforations, but rust has been neutralized with POR15 awhile ago rear seat sun damage and torn on back left rear turn signal not working missing passenger door sills (plastic that retains carpet and covers painted sill) stainless drip moldings need to be replaced This car doesn't need much to be perfect! Daily driver as is or spend a little more on it? This car is being sold strictly as is with no written or verbal warranties expressed or implied. We do not ship but will assist your shipper. Please do not bid if you are not prepared to follow through with purchase. Inspections are welcomed before bidding. Although we are new to Ebay we have over 25 years of selling quality vehicles. Please ask questions before bidding. Thank You for looking and good luck bidding this really is a nice car. |
BMW 2002 for Sale
1974 bmw 2002 baur
1972 bmw 2002 schwatz black 5 speed, ac, like new interior (tii features)
1976 bmw 2002 base coupe 2-door 2.0l purchased from original owners family(US $3,100.00)
1969 bmw 2002 base sedan 2-door 2.0l
1972 bmw 2002 roundie
1976 bmw 2002 chamonix with black interior in excellent condition(US $9,250.00)
Auto Services in North Carolina
Winr Auto Repair ★★★★★
Universal Motors ★★★★★
Universal Automotive 4 x 4 & Drive Shaft Shop, Inc. ★★★★★
Turner Towing & Recovery ★★★★★
Triad Sun Control Inc ★★★★★
Tom`s Automotive ★★★★★
Auto blog
2015 BMW X3 gets a new nose, diesel power
Wed, 05 Mar 2014The second-generation BMW X3 launched in late 2010, and while it's never really wowed us, it's still a solid offering in a highly competitive class. In an effort to keep things fresh, BMW has given its X3 a nip/tuck for the 2015 model year, but perhaps the biggest news (for the US market, anyway) involves what's found underhood.
In addition to the 2.0-liter turbo-four and 3.0-liter turbo-six, BMW will now offer an X3 xDrive28d, fitted with - you guessed it - the 2.0-liter turbodiesel inline four-cylinder engine found in the 328d sedan. Output for this engine is rated at 180 horsepower and 280 pound-feet of torque, and BMW says this oil-burning mill will help the X3 reach 60 miles per hour in just under eight seconds. The automaker hasn't released any information about real or predicted fuel economy figures for the diesel X3, as yet.
What's more, BMW will once again offer a two-wheel-drive X3 in the States - the sDrive28i. Pricing for the refreshed 2013 X3 starts at $39,325, not including $925 for destination. Opting for that diesel will set you back $42,825. Scroll down for the official press release, and check out a new brace of shots live from the soft-roader's Geneva Motor Show debut.
BMW M4 spied in coupe and convertible form
Thu, 29 Aug 2013From the sound of it, we'll have to wait until the Detroit Auto Show to see the production version of the BMW M4, but spy shots show the new hi-po BMW testing recently in both coupe and convertible form. Showing a lot more skin than recent spy shots, these M4 prototypes look very similar to the M4 Concept we saw at Pebble Beach.
Carryovers from the concept car include the funky mirrors, bulging hood and the slotted front fascia vents, but the rear fascia seems to be missing the added flair of the concept and, as expected, the carbon fiber front splitter and exhaust tips are also missing from these M4s. Like the current M3 Convertible, the drop-top version of the M4 will utilize a retractable hard top.
BMW to offer carbon fiber wheels in a year or two
Sun, 23 Feb 2014The Citroën SM sat on the first set of production glass fiber and resin wheels in 1972 when parent company Michelin developed the exotic hoops in order to take the SM rallying. It wasn't until 2008 that we got the first all-carbon-fiber wheel for passenger cars in the form of a prototype model from Weds Sports in Japan that remained a prototype. Australian company Carbon Revolution followed that a year later with its CR-9 all-CF wheel, first introduced on the Shelby Ultimate Aero and now available for independent purchase for about $15,000 per set. BMW could be the first OEM to offer entire wheels in carbon fiber reinforced plastic in two years.
The wheels - either all-CFRP or using a CFRP rim and alloy spokes - were shown off during BMW's Innovation Days in Munich and are products of the development work done on its i-branded cars. The full-CFRP wheel is 35-percent lighter than a forged alloy wheel, the hybrid alloy and CFRP wheel is 25-percent lighter, making for a decent drop in unsprung rotating weight. As demonstrators during a tech day the wheels aren't yet in the pipeline for production and EU approval, but an article in Auto Express claims that they could be on the market as soon as two years from now.
Other possible parts include a full carbon fiber steering wheel and propeller shaft, the latter of which is coming as a single-piece component on the new M3 and M4. BMW is also talking up its use of secondary carbon fiber - waste material from i3 and i8 production - that can be used for items like IP support structures, seat frames and spare wheels in place of traditional metals like aluminum and magnesium. There's an excerpt of the Innovation Day press release below with more details.
2040Cars.com © 2012-2025. All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the 2040Cars User Agreement and Privacy Policy.
0.04 s, 7974 u























