1975 Bmw 2002 Base Coupe 2-door 2.0l on 2040-cars

Auto blog

BMW i3 gets official worldwide

Even though we recently drove a near-production version of the BMW i3, the car still wore light exterior and interior camouflage. Today, BMW took off that little bit of camo and made a big announcement: The i3 will go on sale in the US for $41,350 in the second quarter of 2014. That does not include any state or federal incentives that could lower the price or the $925 destination fee. The i3 will debut with three trim levels, which BMW is referring to as Worlds: Mega (standard in the US), Giga and Tera.
The BMW i3 is chock-full of new technology afforded by its design as an EV from the start of development, which has resulted in a vehicle layout unique to the i3. BMW has named it LifeDrive architecture, and it features the Life Module and the Drive Module. The Life Module is the i3's pillar-less passenger cell, which is the first mass-produced monocoque made of carbon fiber reinforced plastic (CFRP). The tougher-than-steel material is also 30-percent lighter than aluminum, which contributes to the i3's relatively light weight of 2,700 pounds (preliminary US figure) and, in turn, increases its energy efficiency. Expect more of this technology to find its way into future BMWs.
The Drive Module, a 100-percent aluminum chassis mounted under the Life Module, houses everything that makes the i3 go. It includes the 22-kilowatt, 450-pound lithium ion battery mounted as centrally as possible, and provides power to a rear-mounted electric motor that turns the rear wheels. With 170 horsepower and 184 pound-feet of torque from zero rpm, the single-gear i3 can accelerate from 0-30 miles per hour in 3.5 seconds and 0-60 mph in about 7.0 seconds, but it has a top speed of only 93 mph. BMW says the i3 has a real-world EV range of 80-100 miles, and the standard charger can fill the battery in three hours. Opt for the SAE DC Combo Fast Charger and 30 minutes is all it takes for a full charge; 20 minutes will bump the battery to 80 percent. For customers who have range anxiety, BMW gives them the option to install a 34-hp, 650cc two-cylinder generator as a range extender for the electric drive system.

Giles Taylor succeeds Ian Cameron as head of Rolls-Royce design

Back in the day, a Rolls-Royce looked pretty much the same as a Bentley, but with a different grille. Once BMW took over Rolls-Royce, however, it was faced with the challenge of visually separating itself from its former sister brand. And most would agree that it did so pretty well. But its cars have looked pretty much the same ever since. What Rolls-Royce needs, then, is a bit of a design shake-up. And that's just what this latest appointment could bring.
After a baker's dozen years as design director at Rolls-Royce (and twenty years designing for the BMW Group altogether), Ian Cameron is retiring from his post. In his place, Rolls-Royce has named Giles Taylor as its new director of design. In his new capacity, Taylor will report directly to BMW Group chief designer Adrian van Hooydonk, and be responsible for all design matters related to the Rolls-Royce brand and its products.
Taylor was promoted to the role from his previous position as head of exterior design for the marque, a position he's held for barely more than a year. We'll be eagerly watching to see what the veteran British car designer has in store for the future of Rolls-Royce. In the meantime you can read the full announcement below.

BMW and Roland Sands show off Concept 101 custom bagger

Though BMW may not be the first motorcycle manufacturer that comes to mind when you think of cruisers, that's precisely what the German marque has unveiled – in concept form at least – at the Concorso d'Eleganza Villa d'Este this year. Appearing alongside the 3.0 CSL Hommage concept, the BMW Concept 101 is a custom "bagger" created in California through a collaboration between BMW Motorrad, BMW Designworks, and legendary bike builder Roland Sands. Better suited towards cruising down the highway than carving up a racetrack or a dirt trail, the Concept 101 strikes a rather stunning (if uncharacteristic) form. The elongated shape is rendered in materials like brushed aluminum, carbon fiber, and wood trim, tapering towards the rear that encompasses two hard saddle bags characteristic of this style of cruiser. The top half of the bike is done up in lighter shades than the dark bottom, capped by a saddle crafted in fine-grain black leather, perforated black leather and a strip of brown leather. Power comes commandingly from an inline-six displacing 1.6 liters – or about 101 cubic inches, which along with Highway 101, gives the concept bike its name. The engine breaths out through a pair of tailpipes, each with three outlets to emphasize the six-cylinder and envision what it would look like if Munich opted to take on the Honda Gold Wing F6C Valkyrie. Of course this isn't the first time BMW has done a bike with Roland Sands, nor the first time it's displaying a bike concept at Villa d'Este. Last year the German marque displayed the Concept Roadster at the same show, and did the Concept Ninety with the same custom shop at the previous year's concours. BMW Motorrad "Concept 101" - The Spirit of the Open Road. Munich/Cernobbio. Every year, the most impressive representatives of the mobile past and future on both two and four wheels assemble at the Concorso d'Eleganza Villa d'Este for a very special get-together on the shores of Lake Como. Amid this extraordinary blend of the traditional and the contemporary, BMW Motorrad once again presents a breathtaking concept study: the BMW Motorrad "Concept 101". "The Concept 101 opens up a new chapter in the history of our concept bikes. It is the BMW Motorrad interpretation of endless highways and the dream of freedom and independence - the perfect embodiment of "American touring". Designing this big touring bike study was amazingly exciting for us because we haven't been involved with a motorcycle concept like this before.