135i 3.0l Turbocharged 6 Cylinder Sunroof Heated Leather Automatic We Finance on 2040-cars

Auto blog

BMW performance engineering boss wants an M7

Audi has the S8, Mercedes has the S63 AMG and Jaguar has the XJR, but BMW has always held that an M7 wasn't justified, leaving its associated Alpina line to tackle that market with the B7 (pictured). The chief engineer at the M division, however, feels otherwise.
Speaking to Autocar, the BMW M development chief Albert Biermann indicated that he would like to see the M division do a performance version of the 7 Series to compete with the above-mentioned models, but that there are no current plans in place to do so. Neither did he specify what kind of engine it would have, or if it would be badged, for that matter, as an M7 or an M Performance model.
The latter is the approach which the M division is reportedly taking with performance versions of BMW crossovers beyond the X5 M and X6 M, such as the X3 and upcoming X4. The division is also said to be developing a performance-tuned xDrive system to compete with AMG's new all-wheel-drive models, as well as a potential M3 GT to join the new M3 sedan and M4 coupe with a slantback bodystyle.

Rolls-Royce Cullinan and BMW 8 Series spied south of Death Valley

Recently, we've stumbled upon a number of manufacturer prototypes running around. Usually, spy photographers sit and wait for hours with cameras primed in order to get a few shots of a car. We just got lucky. First, we caught the new Chevy Corvette ZR1 convertible during a Facebook Live video. A week or so later McGraw snapped a video of a ZR1 coupe cruising in his neck of the woods. Today, our ace photographer Drew Phillips caught a BMW test fleet filling up the new Rolls-Royce Cullinan and 8 Series coupe in Baker, Calif. Baker sits along Interstate 15, about halfway between Los Angeles and Las Vegas. It's just south of Death Valley, and, being late August, suggests that BMW was doing some hot weather testing. Drew was filling up his car when the fleet rolled in. There were at least two of the new king Rolls and a single 8 Series. Both cars were wearing a full swirl camouflage wrap. It's not an uncommon place to see prototypes. Still, seeing a whole fleet roll in is quite a sight. We've seen official photos of the Cullinan before, but these pictures give us our best view of the profile and rear we've had so far. From a distance, it looks like a high-riding version of the new Phantom with a hatch in place of the trunk. The taillights are obviously just filler units. Expect the final version to look very much like the squared off LED units on the Phantom. Likewise the interior and engine should be straight from the Phantom. That means a twin-turbocharged V12, though power is likely to be sent to all four wheels. We've seen the full BMW 8 Series concept a few times now. The proportions on the production car look the same, with a long hood and even longer wheelbase. The nose isn't quite as aggressive as the concept, but we expected the styling to be toned down to meet crash and safety standards. As for engines, look for six, eight and (hopefully) 12-cylinder power under the hood. A plug-in variant is also expected. Both cars have been in development for a long while, so look for full debuts sometime this auto show season. Maybe we'll happen upon some more test mules between now and then. Related Video:

BMW recalling 40k+ motorcycles to replace rear wheel flange

A problem with the rear wheels on a wide array of its motorcycles has prompted BMW and the National Highway Traffic Safety Administration to issue a recall for 43,426 vehicles. In the affected units, the mounting flange on the rear wheel is at risk of cracking if the bolts are over-tightened. If that flange cracks, "the rear wheel may not remain secured to the motorcycle," which is kind of important considering there are only two wheels on a motorcycle to start with. The recall affects certain model-year 1200 and 1300 models – including the R1200GS, R1200RT, R1200GS, R1200R, R1200S, R1200ST, K1200S, K1200R, K1200R Sport, K1200GT, K1300S, K1300R and K1300GT – as well as the HP2 Megamoto, HP2 Enduro and HP2 Sport. Owners of the affects units can expect to head from the manufacturer to arrange having the aluminum flange replaced with a steel one. Related Video: RECALL Subject : Rear Wheel Mounting Flange may Crack Report Receipt Date: MAR 11, 2015 NHTSA Campaign Number: 15V141000 Component(s): WHEELS Potential Number of Units Affected: 43,426 Manufacturer: BMW of North America, LLC SUMMARY: BMW of North America, LLC (BMW) is recalling certain model year 2005-2010 R1200GS and R1200RT, 2006-2010 R1200GS Adventure, 2007-2010 R1200R, 2007 R1200S and K1200R Sport, 2005-2007 R1200ST, 2008-2009 HP2 Megamoto, 2006 HP2 Enduro, 2008-2010 HP2 Sport, 2005-2008 K1200S, 2006-2008 K1200R, K1200GT, 2009-2011 K1300S, 2010-2011 K1300R, and 2009-2010 K1300GT motorcycles. In the affected motorcycles, the rear wheel mounting flange may crack if the rear wheel mounting bolts are over tightened. CONSEQUENCE: If the rear wheel mounting flange cracks, the mounting bolts may loosen and the rear wheel may not remain secured to the motorcycle, causing a loss of stability and increasing the risk of a crash. REMEDY: BMW will notify owners, and dealers will replace the existing aluminum rear wheel flange with a steel one, free of charge. The recall is expected to begin April 21, 2015. Owners may contact BMW customer service at 1-800-525-7417. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Featured Gallery BMW HP2 Sport View 13 Photos News Source: National Highway Traffic Safety AdministrationImage Credit: BMW Recalls BMW Motorcycle bmw motorrad