2011 Audi S4, Clean Carfax, 1 Owner, Bang N Olufsen, Xenon, Nav, Loaded! on 2040-cars

Auto blog

Audi A3 E-Tron could launch in October in US

When we test drove the Audi A3 E-Tron plug-in hybrid in Europe last summer, Audi was talking about the vehicle's introduction in the US, but left the exact date up in the air. Summer or Fall 2015 was as specific as anyone was willing to get. Now it looks like the plug-in will arrive in October. One of the rumors we heard over the last few months was that the A3 E-Tron was not ready for the US because of poor cold-weather performance. From what we've heard, under a certain temperature limit, the engine needs to kick in at all times, no matter what the battery state of charge is, and some European A3 E-Tron owners are disappointed that their EV sometimes isn't all that electric. Audi's solution needs to take into consideration how to balance utilization of battery power in less-than-optimal temperature ranges with passenger comfort and how any excess battery use impacts longevity. Audi's "fairly conservative" position will "ensure the long-term credibility of the E-Tron platform and plug-in technology." - Brad Stertz Brad Stertz, the corporate communications manager for Audi of America, told AutoblogGreen that, "Audi is taking a fairly conservative position to ensure the long-term credibility of the E-Tron platform and plug-in technology, while still creating the best experience for our drivers in each region. Overall, I think it is safe to say low temps affect performance in all vehicles to some degree, but that plug-ins face unique challenges that we will continue to work through with the A3 e-tron and other plug-in models to follow." Stertz also said in April that the US configuration for the A3 E-Tron was still being fine-tuned. For example, there were some software differences under consideration to meet US driving preferences. Looks like we only have four more months to wait and see. Related Video:

Audi's next-gen "matrix beam lighting system" under threat from Washington

Automotive News reports Audi may have a hard road ahead of it when it comes to convincing federal regulators to allow the company's new matrix beam lighting. The system uses small cameras to detect other vehicles on the road and darkens specific elements of the high-beam pattern to provide maximum nighttime visibility without blinding other drivers. Audi has been displaying this technology on its concept cars for a couple of years now (including the Crosslane Coupe Concept shown above at its 2012 Paris Motor Show reveal). Audi hopes the technology will effectively do away with the industry's current high and low beam settings, but the National Highway Traffic Safety Administration doesn't allow such a system under its current laws. Federal Motor Vehicle Safety Standard 108 specifically says headlamps are not to shine in this dynamic of a way.
Audi has asked has asked NHTSA for more clarification to determine what, if any elements of the matrix beam lighting technology can legally be used on US-specification vehicles. But American buyers may have to settle for systems that automatically dim their high beams until the rules get a bit more clarification.

Startup will make your Audi A4 self-driving for $10k [w/video]

We are on the cusp of the next generation of semi-autonomous driving technology becoming affordable. Adaptive cruise control is already trickling down to the mass market, and the more sophisticated systems found on vehicles like the Mercedes-Benz S-Class are clearly coming, as well. If you're a little adventurous, live in California and drive an Audi, you might be able to upgrade to the next stage of driverless tech even sooner. A San Francisco start-up called Cruise Automation is launching an aftermarket autopilot system called the RP1 for $10,000, with deliveries starting in 2015.
The RP1 is designed for 2012 and newer Audi A4 and S4 models. Although, Cruise CEO Kyle Vogt told Autoblog in an email: "There's no reason we can't expand to other cars, and we will." The system includes a sensor pod on the roof containing cameras, radar and other sensors to scan the road ahead. It then sends data to a small computer mounted on the side of the trunk. The desired inputs are then made by actuators for the steering, brakes and throttle to control the car. A button in the cabin activates the autopilot and controls the desired speed. Not completely unlike Audi's own, developmental, semiautonomous system.
At this point, the RP1 is somewhere between an adaptive cruise control system and an autonomous vehicle. It can control all of the cars inputs and even bring it down to a complete stop and then accelerate again. However, it only works on select highways in California. "We use geofencing to limit the areas of operation to segments of highway in which we've collected enough data to ensure our customers' safety," said Vogt to Autoblog.