2013 Audi Q7 3.0 Tdi Prestige on 2040-cars

Auto blog

Audi and Jaguar Land Rover recalls address seatbelt issues

Audi and Jaguar Land Rover are each recalling several thousand vehicles for separate potential seatbelt issues. The recalls cover the 2022 Audi A3 and S3; 2022 Jaguar F-Type, F-Pace and XF; and the 2022-23 Land Rover Defender, Discovery, Discovery Sport, Range Rover Sport and Range Rover Velar. Examples of these vehicles may have shipped with seatbelt pretensioners that will not function properly in the event of an accident.  Audi is recalling its sedans for tensioner devices that may not adequately restrain drivers or passengers during a crash. The issue was discovered during Korean market crash testing of the high-performance RS 3.  "The seat belt tensioner in the affected vehicles serve the purpose of holding the passenger in his position in the seat," Audi said in its defect report to NHTSA. "In the event of a crash, the retention force of the seat belt may not reach the intended level. As a result, the position of the body can be further to the front of the seat, which leads to a negative influence on the whole restraint system, increasing the risk of injury." A different company, Jaguar Land Rover (JLR), meanwhile, also has an issue with a batch of pretensioners installed in its cars and SUVs. Pretensioners are the devices that fire off to rapidly retract the seatbelt when a crash is detected. Most utilize an explosive charge and pressure tube JLR says that some pretensioner devices provided by one of its suppliers may not have properly-specified pressure tubes that may not channel the gasses to the retraction mechanism correctly.  "A damaged front seat belt pretensioner tube may have been installed on the seat belt retractor," JLR's report said. "This may result in a reduced level or complete loss of pre-tensioning in the event of a crash and increased occupant injury." Owners of the models included in both recall campaigns should receive notices from the manufacturers in the coming months.  Related video: Recalls Audi Jaguar Land Rover Ownership Safety SUV Sedan

Audi 3D-printed this tiny Type C racer, we want to drive it

See this little guy? No, not the one driving – that's Professor Hubert Waltl, Audi's head of production and Volkswagen's chief toolmaker. The thing he's driving, though, is a 1:2 scale replica of the 1936 Auto Union Type C. And it was 3D-printed entirely in house. Not in one piece, mind you. It's too big for that. But the Audi Toolmaking division employed metal printing technology to fabricate all the parts that went into this replica of one of the most dominant of the Silver Arrow grand prix racers of the pre-war era. It's essentially like the pedal car Audi rolled out nine years ago, or the E-Tron concept it showed us nearly five years ago. Only this one uses more advanced manufacturing techniques. Aside from making us want to drive it like nobody's business, the half-sized vehicle serves to showcase the advancements which Audi and the VW Group are making in manufacturing – particularly in the area of 3D printing. The German automaker presently has the technology to print laser-melted layers of metallic powder – either steel or aluminum – with grains measuring half the diameter of a human hair. The equipment can handle objects as large as 7.9 inches high by 9.5 inches wide – which, as small as this little car looks, is still a bit too large to simply print out in one piece. Audi Toolmaking prints "Auto Union Typ C" - Exact model of the "Silver Arrow" from a 3D printer - Audi Board of Management Member for Production Prof. Dr. Hubert Waltl: "This underscores our pioneering role in toolmaking." From powder to a component: With a 3D printer, Audi Toolmaking has produced a model of the historical Grand Prix sports car "Auto Union Typ C" from the year 1936. The company is now examining further possible applications of metal printers for the production of complex components. At the same time, Audi is creating important synergies with toolmaking in other parts of the Volkswagen Group. "We are pushing forward with new manufacturing technologies at Audi Toolmaking and at the Volkswagen Group," stated Prof. Dr. Hubert Waltl, Audi's Board of Management Member for Production and Head of Toolmaking at the Volkswagen Group. "Together with partners in the area of research, we are constantly exploring the boundaries of new processes. One of our goals is to apply metal printers in series production." The Volkswagen Group has a total of 14 toolmaking units in nine countries. Under the leadership of Prof. Dr.

Suspended VW exec Hackenberg resigns in wake of scandal

Ulrich Hackenberg, father of the innovative modular architecture that underpins many modern Volkswagen and Audi products and a 30 year veteran of the giant company, has resigned his position as the lead engineer for the entire Volkswagen Group as well as his seat on Audi's management board, reports Automotive News. The resignation closes out a two-month suspension while the investigation into VW's deceptive emissions practices continues.The resignation follows the admission by Audi that the 3.0-liter TDI V6 engine was also fitted with emissions-control defeating software, like some of its four-cylinder TDI counterparts. In turn, this lead to changes in Audi's management structure. AN reports that Matthias Muller, who has already taken over Martin Winterkorn's position as VW Group CEO, will also be named chairman of the Audi brand.Hackenberg's successor was named as part of this announcement. Stephan Knirsch, who has lead engine development at the Audi division, will assume Hackenberg's roles as both board member for Audi in charge of technical development, and as the head for technical development across the whole group.Related Video: