2014 Audi 6.3l W12 Quattro on 2040-cars

Auto blog

Don't hold your breath for an Audi RS8

There was a time not so long ago when Quattro GmbH produced essentially one model at a time. But that time is behind us. These days it's expanding into a full-fledged performance division to rival Mercedes-AMG and BMW's M department. Quattro GmbH is currently building the Audi RS4 Avant, RS5 coupe and cabrio, RS6 Avant, RS7, RS Q3 and the TT RS coupe and roadster - not to mention the R8. And while it's showing no signs of slowing down, but the latest intel from across the pond suggests we shouldn't count on an RS version of Audi's flagship sedan.
This according to Car and Driver, which spoke to Stephan Reil, the chief engineer at Quattro GmbH. Reil says Audi works on a teutonically rigid performance formula: an RS model has to have 20 to 25 percent more power than the existing S version. Considering that the existing S8 makes 512 horsepower and the RS7 a solid 553, we're not sure Audi really needs anything more powerful. But by Reil's calculations, the RS8 would need to pack between 630 and 655 hp, which would put it well ahead of rivals like the 550-hp Jaguar XJR, the 540-hp BMW Alpina B7, the 523-hp Maserati Quattroporte and even the new 577-hp Mercedes-Benz S63 AMG - and in league only with the even more powerful S65 AMG, which in its outgoing form produced 630 hp.
The question then comes down to whether there are enough customers lining up for the S65 that Audi would want to poach away from Mercedes. Or perhaps more pertinently, whether it might end up just taking customers from the new Bentley Flying Spur, which is already offering 616 horsepower in an even more prestigious, if less performance-focused package. Either way you look at it, Audi is apparently steering clear.

2014 Audi SQ5 priced from $51,900* [w/video]

Despite the fact that the 2014 Audi SQ5 you see here is quite a bit different than the one offered in Europe, we're still plenty glad that the folks from Ingolstadt have decided to offer a hotted-up version of its compact Q5 crossover here in the States. Now, Audi has announced that its US-spec SQ5 will be priced from $51,900 when it hits dealerships later this summer (*not including $895 for destination). That strikes us as a pretty favorable price - while the base Q5 in 2.0-liter TFSI trim starts at $35,900, the 3.0-liter Prestige model commands a full $51,400, and somehow manages to feel worth it.
We already enjoy driving the Q5 in its standard tune, and this SQ5 looks to be quite an entertaining thing. Audi has tuned its 3.0-liter supercharged V6 to produce 354 horsepower and 347 pound-feet of torque - gains of 82 hp and 52 lb-ft over the standard 3.0L Q5. No, it's not the awesome 313 hp and 479 lb-ft of the twin-turbo-diesel engine used in Europe, but our American SQ5 will certainly be a quick little thing. Audi is estimating a 0-60 time of 5.1 seconds, on its way to a limited top speed of 155 miles per hour.
Like all S models, the SQ5 will be a bit different visually than its basic Q5 kin. Aluminum roof rails are standard, as are 20-inch wheels (21s are available). There are revised bumpers at the front and rear, with Audi's usual gray grille and diffuser, as well as aluminum mirror caps. Inside, leather- and Alcantara-clad sport seats are standard, though buyers can opt for a fine Nappa leather setup. Audi says that new aluminum/black wood inlays are also available, as is a 14-speaker Bang & Olufsen sound system.

Researchers halfway to cutting carbon fiber costs by 90%

Carbon fiber has been utilized for decades to build racecars, as a means to cut weight while maintaining strength. But until recently, the space-age material has been largely absent from the street on anything but supercars because of the expense to use it. Recently, BMW signaled a major shift in that trend when it starting using carbon fiber reinforced plastic panels on the i3 and i8. This relatively small scale start might be just the beginning; the German company believes that a breakthrough to inexpensively manufacture the lightweight stuff is just on the horizon.
MAI Carbon Cluster Management GmbH counts BMW, Audi, Airbus, the German government and many other organizations as supporters, and it's researching how to make carbon fiber cheaper to produce, according to Automotive News Europe. The company thinks it can reduce costs by 90 percent in the near future. "We've certainly reached a halfway point on our cost-cutting target for suitable carbon-fiber parts," said project head Klaus Drechsler to Automotive News Europe.
Unfortunately, it isn't entirely clear just what MAI Carbon is doing to make such a huge leap possible. However, a recent post on the company's website talks about a new form a carbon fiber using a thermoplastic matrix that could be cured in less than three minutes. That's compared to about 90 minutes in the traditional process with an autoclave.