2010 Ford E350 Econoline Ext. Body 15 Passenger Van 5.4l V8 A/t Cold A/c Cd Aux on 2040-cars

Auto blog

Audi reveals 'rightsized' 2.0 TFSI engine for next A4

Downsizing engines is a trend sweeping the industry. It's not a new thing, and downsizing helps automakers cut fuel consumption and emissions while employing techniques like turbocharging and direct injection. Audi, however, is taking a different approach with its latest engine. Revealed at the Vienna Motor Symposium in Austria is Audi's newest trick powertrain. Where others are going with smaller engines, Ingolstadt's latest displaces a nice round 2.0 liters, employing a shorter intake time to use less fuel. It's sort of like the Miller cycle that Mazda brought to market on the old Millenia, only turbocharged (instead of supercharged) and brought up to date. Audi calls the four-pot "rightsized," producing 190 horsepower and 236 pound-feet of torque across a broad rev range, while getting 47 miles to the gallon – and that's on the US cycle, which is tougher than the European standard a company like Audi would usually quote. In short, it's designed to provide power where needed but only sip at the fuel tank when it's not, but the geekiest among us will want to delve into all the intricacies outlined in the announcement below. The engine is set to power the next-generation A4 before being rolled out in additional models in the future. Ingolstadt/Vienna, 2015-05-07 World premiere at the Vienna Motor Symposium: new high-efficiency engine from Audi - New 2.0 TFSI four-cylinder engine with innovative combustion method - Top figures: 190 hp, 320 Nm (236.0 lb-ft), less than 5 l/100 km (47.0 US mpg) - To be implemented in the new Audi A4 by the end of 2015 - Prof. Dr. Ulrich Hackenberg: "A prime example of the Audi rightsizing strategy" Audi presents the most efficient two-liter gasoline engine in its class. The new 2.0 TFSI with 140 kW (190 hp) demonstrates the engine expertise of the brand – with a ground-breaking new combustion method. Audi will be using the engine for the first time in the next generation of the A4. Over ten years ago, Audi was the first manufacturer worldwide to bring the TFSI engine with turbocharging and direct injection into series production. This made the brand with the four rings the trendsetter in downsizing and downspeeding. "We're now taking a crucial step further with rightsizing," said Prof. Dr. Ulrich Hackenberg, Member of the Board of Management for Technical Development at AUDI AG.

Who doesn't want an Audi RS7 with turbo horns?

Very little is known about the origins of this exhaust-horned and turbo-eyed beast. The guys at Road & Track tracked it down as far as a Russian tuner named Total Race. Aside from that, what we have here is video of an Audi with no hood and two huge turbos sitting on top of its 4.0-liter V8 instead of nestled in the engine's vee where they belong. And those crazy and haphazardly routed exhausts. We also don't know how much power this thing is making, but from the way it launches away from the camera, we're going to go with "a lot." The YouTube clip claims this is the Stage 10 tune, but who knows. Granted, the drivetrain probably can't take everything this Frankensteined engine could theoretically put down, so there's likely some kind of electro-wizardry at play limiting output until it at least hooks up. And if traction control still exists somewhere in there it might be helping keep the tires from melting. Chances are some part of the driveline will grenade itself if you try this too many times, but hey, as long as you get one or two decent YouTube vids first, right? Even if it doesn't add any meaningful power output beyond the RS7 Performance's already plentiful 605 ponies, we can't bring ourselves to care. The high-pitched sound of the exhaust from those heat-wrapped pipes jutting out like the horns of a crazed antelope are simply priceless. Thank you, Russia. Related Video:

Production 4.0: Audi plans for the smart factory

Automotive production is becoming more integrated and at the same time has to be more intelligent and more efficient. Flexible production of customized vehicles is one of the big challenges for the future, especially for a premium carmaker like Audi. How will the "Vorsprung durch Technik" brand meet its aim of offering premium quality with added custom flexibility? The company sees the "smart factory" as the key. Whether it's body-color moldings or light-alloy wheels in a special size, almost every car is ordered with some kind of customization, and the demands are increasing. This requires of course already a lot of flexibility. While the variety of models and quality demands are increasing, automotive manufacturers such as Audi are eager to make production sustainable. In an Audi interview, innovation management members Alois Brandt and Henning Loser talk about "production 4.0" and the upcoming "smart factory." How will Audi manage the production site with its very high standards of quality, efficiency, and environmental acceptability? Will the so-called "smart factory," which should be the intelligent factory of the future, only employ robots? Alois Brandt: "With a deep look into the production, I am convinced that our employees and not machines are the relevant working forces behind the Audi brand. Machines can be bought anywhere." Increasing digitalization is paving the way for the smart factory – the intelligent, digitally connected production facility. New high-tech solutions in manufacturing should further increase the high level of quality, while at the same time the assembly work should be easier and result in better ergonomics. Can you give us a clearer imagination of the "smart factory"? Alois Brandt: "There are a lot of ideas. But the big question at the moment is: Which one is really needed and leads into the right direction?" Can you tell us a little bit more about "production 4.0"? Alois Brandt: "The assembly line as we know it in the present will no longer play the same role. If it makes sense, it will be terminated and replaced by – let's call it – a virtual assembly line. The production will be more modular than before and the car will be directed to a production point – a so-called 'island of competence' – where it is needed." Henning Loser: "If the vehicle is to be assembled to the customer's wishes, it is obvious that efficient programming of robots and coordinating with the human workers is needed.