Blue Audi A6 4.2 on 2040-cars

Auto blog

Audi and Jaguar Land Rover recalls address seatbelt issues

Audi and Jaguar Land Rover are each recalling several thousand vehicles for separate potential seatbelt issues. The recalls cover the 2022 Audi A3 and S3; 2022 Jaguar F-Type, F-Pace and XF; and the 2022-23 Land Rover Defender, Discovery, Discovery Sport, Range Rover Sport and Range Rover Velar. Examples of these vehicles may have shipped with seatbelt pretensioners that will not function properly in the event of an accident.  Audi is recalling its sedans for tensioner devices that may not adequately restrain drivers or passengers during a crash. The issue was discovered during Korean market crash testing of the high-performance RS 3.  "The seat belt tensioner in the affected vehicles serve the purpose of holding the passenger in his position in the seat," Audi said in its defect report to NHTSA. "In the event of a crash, the retention force of the seat belt may not reach the intended level. As a result, the position of the body can be further to the front of the seat, which leads to a negative influence on the whole restraint system, increasing the risk of injury." A different company, Jaguar Land Rover (JLR), meanwhile, also has an issue with a batch of pretensioners installed in its cars and SUVs. Pretensioners are the devices that fire off to rapidly retract the seatbelt when a crash is detected. Most utilize an explosive charge and pressure tube JLR says that some pretensioner devices provided by one of its suppliers may not have properly-specified pressure tubes that may not channel the gasses to the retraction mechanism correctly.  "A damaged front seat belt pretensioner tube may have been installed on the seat belt retractor," JLR's report said. "This may result in a reduced level or complete loss of pre-tensioning in the event of a crash and increased occupant injury." Owners of the models included in both recall campaigns should receive notices from the manufacturers in the coming months.  Related video: Recalls Audi Jaguar Land Rover Ownership Safety SUV Sedan

2017 Audi A4 Deep Dive

Unchanged. Plain. Boring. These words have been used to describe the new 2017 Audi A4, but they all miss the point entirely. Yes, the design of the new A4 is evolutionary, rather than a ground-up restyling. But as they say in ancient High German, "If it ain't broke, don't fix it." Of course, if you're at all interested in the 2017 Audi A4, you've probably read all about it in the official press release a few days ago. So we'll cut to the chase and tell you the bits you don't already know: the American-market details. We spent a day at Audi headquarters in Ingolstadt last week finding out the latest and poking around the A4 in the metal. The new A4 is wider, longer, and roomier than before. The lines are crisper and sharper, but yes, the proportions have remained very similar. That was done on purpose, thoughtfully. Not out of laziness. Stand any two sequential generations of Porsche 911 next to each other and you'll find they are rather similar. And yes, people do complain about that. But they also complain about the property tax rate on their third home in Monaco. That familiar-looking body gets a shockingly low coefficient of drag of just 0.23. The improvements in drag come from fine-tuning details down to the placement of the side mirror (now on the door, rather than the triangular window panel) and the contouring of the inner edge of the side mirror, which gets little vortex generating bumps to improve the turbulent airflow in that area, reducing drag. Attention to detail and refinement of a successful design – not boring, lazy repetition. Another notable departure in the styling of the new A4 is equally subtle, but even more significant from a precision manufacturing perspective: the hood has no cut lines on its upper surface. Instead, the hood now wraps around the tops of the fenders, the cut line integrating with the sharp crease that runs down the entire body side. The creation of this cut line requires extremely tight manufacturing tolerances to enable the precise alignment of the hood and fender gap with the stamped-in crease in the door panel; misalignment would be obvious and catastrophic to the clean, simple design's flow. Now, let's rip off this Band-Aid: no, we won't be getting the Avant. Why? Because no one buys it, vociferous vocalizations on the Internet aside.

Audi working on new Quattro-centric horizontal design language

If we were to opine that Audi needed a new design language, we certainly wouldn't be the first. Because while most of the vehicles wearing the Four Rings these days look slick enough, they all tend to look rather similar, and perhaps lack a certain amount of character. If the latest rumors are to be believed, Audi is working on just such a design overhaul.
The new design language being developed in the studios at Ingolstadt is said to differ from the current theme in two ways. For one, it's set to be dominated by a more horizontal approach, eschewing the tall vertical grille that dominates the noses of many of Audi's current models in favor of one that stretches more widely across the fascia.
For another, Edmunds projects that the new design language will emphasize the four-wheel-drive setup that has become Audi's hallmark. We understand that to mean more muscular wheel arches, with the rest of the design revolving around that element for an overall look that's more visually planted on the road. We'll have to wait to see how this theme develops, but the rumors at least indicate that Audi is aware of its design issues and is working to address it.