2022 Audi A5 45 Premium on 2040-cars

Auto blog

Audi bringing Q3 Stateside after all?

One of the major changes that made to the Audi SQ5 to get it ready for the US market was a ride height that was lifted by 1.2 inches compared to its European counterparts. The small increase allowed the SQ5 to retain its "light truck" classification of the Q5 for emissions regulations. In a similar move, Car and Driver is reporting that the Audi Q3 crossover will also be joining the Audi lineup in the US once it receives a facelift and taller ride height.
Expect this facelift to fit in with other recent product updates including the Q5, which mainly focused on a cleaner, more upscale front end and the company's signature LED running lights. The report says that Audi could bring the Q3 Stateside "within a year or two," and it also says that a souped-up RS Q3 will follow close behind. This performance version of the compact crossover gets its power from a 2.5-liter turbocharged inline-five-cylinder engine shared with the Audi TT RS.

Audi SQ7 TDI packs 48V electric compressor, 664 lb-ft

Take a look at the new Audi SQ7 TDI. It's the first time Audi has done an S performance version of its flagship sport-ute, and packs under the hood a 4.0-liter V8 turbo diesel engine mated to an eight-speed automatic and all-wheel drive. It produces a potent 435 horsepower, and an absolutely bonkers 664 pound-feet of torque. The Audi SQ7 TDI produces a massive 664 lb-ft of torque. Impressive as it is, though, that doesn't even tell the full story. That's enough to make us forget it wasn't there in Geneva. It's also more torque than just about anything the Volkswagen Group makes – short of the Bentley Mulsanne Speed and the new Bugatti Chiron. Not even the Lamborghini Aventador SV or Bentley Continental GT Speed can touch that torque figure. Nor can competition like the Porsche Cayenne S Diesel (with its 385 hp and 627 lb-ft) or the BMW X5 M50d (381 hp and 546 lb-ft). It may not surpass the old twelve-cylinder Q7 6.0 TDI (with its 493 hp and 738 lb-ft), but still trounces the VW Touareg V10 TDI (309 hp and 553 lb-ft) – which was strong enough to tow a jet airplane, while the new SQ7 is fast enough to out-drag one (as you can see from the video below). Impressive as it is, though, that headline-grabbing torque figure doesn't tell the full story. To get there, Audi employed two conventional, sequential turbochargers and a third compressor that – in an industry first that's been a long time coming – is powered electrically. The engineers in Ingolstadt installed a beefier 48-volt electric subsystem to power the electric compressor (among other systems) and its latest valvetrain tech for the first time in a diesel. The result, Audi says, is a lack of any perceptible turbo lag – and a 0-62 time quoted at 4.8 seconds, en route to the typical electronically limited top speed of 155 miles per hour. As if that weren't enough, Audi also equipped the SQ7 TDI with an optional suspension package that coordinates the activities of three systems. There's a differential, a four-wheel steering system, and a clever electromechanical roll stabilization system that employs an electric motor (made possible once again by that 48-volt system) and a three-stage planetary gearbox to keep it all level and improve ride quality over rough surfaces. The sum total is an impressive technological tour de force on Audi's part, but one that we may just have to admire from afar.

Audi 3D-printed this tiny Type C racer, we want to drive it

See this little guy? No, not the one driving – that's Professor Hubert Waltl, Audi's head of production and Volkswagen's chief toolmaker. The thing he's driving, though, is a 1:2 scale replica of the 1936 Auto Union Type C. And it was 3D-printed entirely in house. Not in one piece, mind you. It's too big for that. But the Audi Toolmaking division employed metal printing technology to fabricate all the parts that went into this replica of one of the most dominant of the Silver Arrow grand prix racers of the pre-war era. It's essentially like the pedal car Audi rolled out nine years ago, or the E-Tron concept it showed us nearly five years ago. Only this one uses more advanced manufacturing techniques. Aside from making us want to drive it like nobody's business, the half-sized vehicle serves to showcase the advancements which Audi and the VW Group are making in manufacturing – particularly in the area of 3D printing. The German automaker presently has the technology to print laser-melted layers of metallic powder – either steel or aluminum – with grains measuring half the diameter of a human hair. The equipment can handle objects as large as 7.9 inches high by 9.5 inches wide – which, as small as this little car looks, is still a bit too large to simply print out in one piece. Audi Toolmaking prints "Auto Union Typ C" - Exact model of the "Silver Arrow" from a 3D printer - Audi Board of Management Member for Production Prof. Dr. Hubert Waltl: "This underscores our pioneering role in toolmaking." From powder to a component: With a 3D printer, Audi Toolmaking has produced a model of the historical Grand Prix sports car "Auto Union Typ C" from the year 1936. The company is now examining further possible applications of metal printers for the production of complex components. At the same time, Audi is creating important synergies with toolmaking in other parts of the Volkswagen Group. "We are pushing forward with new manufacturing technologies at Audi Toolmaking and at the Volkswagen Group," stated Prof. Dr. Hubert Waltl, Audi's Board of Management Member for Production and Head of Toolmaking at the Volkswagen Group. "Together with partners in the area of research, we are constantly exploring the boundaries of new processes. One of our goals is to apply metal printers in series production." The Volkswagen Group has a total of 14 toolmaking units in nine countries. Under the leadership of Prof. Dr.