Manual Transmission We Finance Extended Warranty Available Fun To Drive on 2040-cars

Auto blog

Audi R8 E-Tron back on production map thanks to new battery tech?

Contrary to our October 2012 report, it appears Audi's R8 E-Tron program is back on track, if a report from Australia is to be believed. Drive is reporting that the German brand has changed its mind and won't be sacking the program, despite previously stated concerns about the quality and price of batteries for the R8-based EV.
We last saw the R8 E-Tron prototype in the snows of northern Europe, although footage of the car has been non-existent since that wintry test. This new report claims that a small number of R8 E-Trons will see production, which gels with what we heard back in 2012 and supposed earlier this year. Apparently, some new sort of lithium-ion battery technology has allowed for a drastic increase in range, with rumors of the original 130 miles going up to around 250. According to Drive, this makes the project feasible again.
"Our engineers and technicians are further developing the car and its electric drive system. The range has grown significantly, allowing the potential for a small-scale production," an unnamed, but high-ranking Audi employee told the Aussies.

Audi builds 5-millionth vehicle with Quattro

Quattro, the trademark name Audi has put on its all-wheel-drive system engineered for passenger vehicles, recently celebrated its five-millionth installation. The driveline has been offered in more than 140 different vehicles since its introduction more than three decades ago.
The all-wheel-drive technology made its world debut at the 1980 International Geneva Motor Show, beneath the floorpan of the Quattro Coupé, a low-volume two-door. It didn't take consumers long to embrace Audi's innovative approach. While most four-wheel-drive systems at that time utilized heavy transfer cases or second cardan shafts, Quattro was virtually tension-free, light, compact and efficient. Most importantly, enthusiasts found it was especially suitable for sports cars.
Today, the automaker offers Quattro on its full line of passenger vehicles and it is unquestionably successful (the technology enjoyed a 43 percent take rate in 2012). On models with transverse-mounted engines (A3 and TT), Audi uses an electronically controlled multi-plate clutch with hydraulic actuator. Under normal conditions, the clutch sends power almost exclusively to the front wheels (if wheel slippage occurs, up to 100 percent of the torque may be sent to the rear). Vehicles with transverse-mounted engines (A4, A5, Q5, etc...) use a self-locking center differential sending 40 percent of the engine torque to the front axle and 60 percent to the rear under normal conditions (it is able to send the majority of the power to the axle with better traction when needed). The highest-performing Quattro systems use torque vectoring to further improve cornering grip and speeds.

2015 Audi Q3

There are two ways to approach a brand-new segment in the auto industry. First, an automaker can take a gamble and introduce a completely new vehicle, catering to the specific demands of the marketplace(s) in question. In the compact, premium CUV segment, we've seen Buick do this with the Encore, and Mercedes-Benz with the GLA-Class. The other option is to introduce a vehicle already sold in another market. Considering the amount of time it takes to bring a new vehicle from paper to production, there is plenty to gain in the short-term with this approach. It's not without its downsides, though, as we found after a week behind the wheel of the 2015 Audi Q3, a vehicle that was initially launched in 2011. Cute though it may be – it was referred to at least once by a passerby during our testing as "totes adorbs" – Ingolstadt's decision to introduce a vehicle that's already been on sale for four years, and is effectively approaching the last half of its lifecycle, leaves the Q3 at a significant disadvantage relative to the newer competition. Despite crossing its first auto show stage four years ago, the Q3 remains a handsome little bugger. Audi's designs, while conservative, tend to age very well, and the compact Q3 is no exception. It's like a scaled-down Q5 in most respects, although certain design pieces, like its more aggressively raked rear window and shorter front and rear overhangs, belie the significantly smaller Q3's figure. Due to its age, the Q3 was, fortunately, designed before the current A3 hit the market. That means it avoids the unattractive, minimalist dash of the A3, opting for a more traditional Audi design, with a strip of brushed aluminum on the passenger's side, a user-friendly center stack and a suitably large nav screen front and center. While the overall layout is attractive, the material quality is not what we'd expect of a newer Audi. There's nothing that feels exceedingly cheap – the plastics just feel old and too familiar. It's difficult to describe, but as soon as you climb in the Q3, things like the switchgear for the HVAC controls immediately remind you that this is a vehicle that's been on sale since 2011. While our definition of interior quality has evolved over the years, our idea of a driver-friendly cabin has not. The Q3 scores highly in this regard, featuring the elevated seating position that makes CUVs so popular with the general public.