6 Cyl Convertible Rare Spt Recaro Pwr Seats Bose Nav Bluetooth 90k Service Done! on 2040-cars

Auto blog

These are the cars with the best and worst depreciation after 5 years

The average new vehicle sold in America loses nearly half of its initial value after five years of ownership. No surprise there; we all expect that shiny new car to start depreciating as soon as we drive it off the lot. But some vehicles lose value a lot faster than others. According to data provided by iSeeCars.com, trucks and truck-based sport utility vehicles generally hold their value better than other vehicle types, with the Jeep Wrangler — in both four-door Unlimited and standard two-door styles — and Toyota Tacoma sitting at the head of the pack. The Jeep Wrangler Unlimited's average five-year depreciation of 30.9% equals a loss in value of $12,168. That makes Jeep's four-door off-roader the best overall pick for buyers looking to minimize depreciation. The Toyota Tacoma's 32.4% loss in initial value means it loses just $10,496. The smaller dollar amount — the least amount of money lost after five years — indicates that Tacoma buyers pay less than Wrangler Unlimited buyers, on average, when they initially buy the vehicle. The standard two-door Jeep Wrangler is third on the list, depreciating 32.8% after five years and losing $10,824. Click here for a full list of the top 10 vehicles with the least depreciation over five years. On the other side of the depreciation coin, luxury sedans tend to plummet in value at a much faster rate than other vehicle types. The BMW 7 Series leads the losers with a 72.6% drop in value after five years, which equals an alarming $73,686. BMW's slightly smaller 5 Series is next, depreciating 70.1%, or $47,038, over the same period. Number three on the biggest losers list is the Nissan Leaf, the only electric vehicle to appear in the bottom 10. The electric hatchback matches the 5 Series with a 70.1% drop in value, but since it's a much cheaper vehicle, that percentage equals a much smaller $23,470 loss. Click here for a full list of the top 10 vehicles with the most depreciation over five years.

Next Audi RS4 to get V6 turbo, US sales still unclear

Audi's high-performance S models have forged a reputation in the US for offering wonderful driving dynamics in a package that doesn't scream, "I bought a sport sedan." However, its even higher-performance RS models are still somewhat of a rarity here. While the RS5 and RS7 are in the current US lineup, many of the wild RS models that Europe gets, like the RS6 Avant (pictured above), never make it to these shores. Unfortunately, that might not be changing anytime soon with the next-gen RS4.
The RS4 will follow the lead of the next BMW M3/M4 and (rumored) next Mercedes-Benz C-Class AMG and make the switch to a smaller turbocharged powerplant. According to an Audi insider speaking to Car and Driver, the next RS4 will drop the last generation's 4.2-liter V8 in favor of a turbocharged V6. The engine block will likely be shared with the supercharged 3.0-liter V6 in the regular S4 but fitted with two turbochargers. Power would likely be around 400 horsepower to match the 425-hp M3 and rumored 450-hp C-Class AMG.
Unfortunately, the RS might not make it across the pond to our waiting hands because the source says no decision has been made to export them yet. Obviously, we hope that Audi makes the right decision and brings the next RS4 here.

Audi 3D-printed this tiny Type C racer, we want to drive it

See this little guy? No, not the one driving – that's Professor Hubert Waltl, Audi's head of production and Volkswagen's chief toolmaker. The thing he's driving, though, is a 1:2 scale replica of the 1936 Auto Union Type C. And it was 3D-printed entirely in house. Not in one piece, mind you. It's too big for that. But the Audi Toolmaking division employed metal printing technology to fabricate all the parts that went into this replica of one of the most dominant of the Silver Arrow grand prix racers of the pre-war era. It's essentially like the pedal car Audi rolled out nine years ago, or the E-Tron concept it showed us nearly five years ago. Only this one uses more advanced manufacturing techniques. Aside from making us want to drive it like nobody's business, the half-sized vehicle serves to showcase the advancements which Audi and the VW Group are making in manufacturing – particularly in the area of 3D printing. The German automaker presently has the technology to print laser-melted layers of metallic powder – either steel or aluminum – with grains measuring half the diameter of a human hair. The equipment can handle objects as large as 7.9 inches high by 9.5 inches wide – which, as small as this little car looks, is still a bit too large to simply print out in one piece. Audi Toolmaking prints "Auto Union Typ C" - Exact model of the "Silver Arrow" from a 3D printer - Audi Board of Management Member for Production Prof. Dr. Hubert Waltl: "This underscores our pioneering role in toolmaking." From powder to a component: With a 3D printer, Audi Toolmaking has produced a model of the historical Grand Prix sports car "Auto Union Typ C" from the year 1936. The company is now examining further possible applications of metal printers for the production of complex components. At the same time, Audi is creating important synergies with toolmaking in other parts of the Volkswagen Group. "We are pushing forward with new manufacturing technologies at Audi Toolmaking and at the Volkswagen Group," stated Prof. Dr. Hubert Waltl, Audi's Board of Management Member for Production and Head of Toolmaking at the Volkswagen Group. "Together with partners in the area of research, we are constantly exploring the boundaries of new processes. One of our goals is to apply metal printers in series production." The Volkswagen Group has a total of 14 toolmaking units in nine countries. Under the leadership of Prof. Dr.