2003 Audi A4 Quattro Avant Wagon 4-door 1.8l on 2040-cars

Auto blog

300-HP 2013 Audi S3 Sportback unwrapped

Not content to let Volkswagen have all of the fun with its GTI and Golf R, Audi is rebooting its five-door S3 Sportback with rather monstrous power. Headed for an official unveil at this year's Geneva Motor Show, the new S3 rolls out with a 300-horsepower, 280-pound-feet of torque turbocharged 2.0-liter TFSI engine under the hood. The four-cylinder powerplant is strong enough to shove the Sportback to 62 miles per hour in just 5.0 seconds when connected to the optional S-Tronic gearbox, or 5.5 seconds with the traditional manual transmission. Top speed is said to be an electronically governed 155 mph. Almost as impressive as those performance figures are the fuel economy ratings: the S- S3 is said to average 34 miles per gallon.
All S3 Sportback models offer Quattro all-wheel drive, ride on a sport-tuned suspension tuned to a lower ride height (about one inch) versus the standard Audi A3. 18-inch wheels with 225-section tires are standard equipment, and 13.39-inch front brakes should offer serious stopping ability.
Audi has done a lot of work shedding pounds from this latest MQB-architecture S3, as well. The car has a curb weight of roughly 3,186 pounds, or some 154 pounds less than the outgoing model. 11 of those pounds were cut via weight-saving measures in the 2.0-liter engine.

Audi readying 650-hp Sport Quattro Concept for Frankfurt

Remember Audi's perfectly lovely Quattro Concept from the 2010 Paris Motor Show? Of course you do. The latter-day Ur-Quattro is laser-etched in our brains as well - and not just because Audi was kind enough to offer our man Michael Harley a mountain drive of its seven-figure showcar. At the time, Audi hinted that the coupe might have a showroom future, but the gossip pipeline has long since gone dry, leading us to believe that the car's production hopes had soured.
That 2010 concept was powered by a 2.5-liter five-cylinder engine yielding 380 horsepower and 354 pound-feet of torque, a relatively modest but appropriate engine configuration in light of the Ur-Quattro's five-banger. Given the Quattro Concept's size and specs, it wasn't clear exactly where such a vehicle might fit into the company's lineup, though, as it already already offers the successful A5/S5/RS5 lineup.
Apparently, Audi might have a solution to that conundrum. A new report from Germany's AutoZeitung suggest that the automaker is posed to reveal a production version of the concept at the Frankfurt Motor Show in September - on the Ur-Quattro's 30th anniversary, no less. Word is that Audi is taking the Quattro Concept upmarket in a big way, with a tuned version of the twin-turbo 4.0-liter V8 from the RS7 churning up in the neighborhood of 650 horsepower. Naturally, all-wheel drive will get all that power to the ground, and new bodywork is expected as well. In addition to the powertrain switch-up, there is talk of extensive use of lightweight materials, including magnesium, carbon fiber and aluminum, with a target weight of under 2,900 pounds. Magnetic ride control suspension and carbon-ceramic brakes are also expected to find their way onto the model. Unsurprisingly, all of that extra equipment is likely to impact the car's bottom line - reports suggest its sticker price could crowd that of the mighty R8 at around $150,000.

Audi 3D-printed this tiny Type C racer, we want to drive it

See this little guy? No, not the one driving – that's Professor Hubert Waltl, Audi's head of production and Volkswagen's chief toolmaker. The thing he's driving, though, is a 1:2 scale replica of the 1936 Auto Union Type C. And it was 3D-printed entirely in house. Not in one piece, mind you. It's too big for that. But the Audi Toolmaking division employed metal printing technology to fabricate all the parts that went into this replica of one of the most dominant of the Silver Arrow grand prix racers of the pre-war era. It's essentially like the pedal car Audi rolled out nine years ago, or the E-Tron concept it showed us nearly five years ago. Only this one uses more advanced manufacturing techniques. Aside from making us want to drive it like nobody's business, the half-sized vehicle serves to showcase the advancements which Audi and the VW Group are making in manufacturing – particularly in the area of 3D printing. The German automaker presently has the technology to print laser-melted layers of metallic powder – either steel or aluminum – with grains measuring half the diameter of a human hair. The equipment can handle objects as large as 7.9 inches high by 9.5 inches wide – which, as small as this little car looks, is still a bit too large to simply print out in one piece. Audi Toolmaking prints "Auto Union Typ C" - Exact model of the "Silver Arrow" from a 3D printer - Audi Board of Management Member for Production Prof. Dr. Hubert Waltl: "This underscores our pioneering role in toolmaking." From powder to a component: With a 3D printer, Audi Toolmaking has produced a model of the historical Grand Prix sports car "Auto Union Typ C" from the year 1936. The company is now examining further possible applications of metal printers for the production of complex components. At the same time, Audi is creating important synergies with toolmaking in other parts of the Volkswagen Group. "We are pushing forward with new manufacturing technologies at Audi Toolmaking and at the Volkswagen Group," stated Prof. Dr. Hubert Waltl, Audi's Board of Management Member for Production and Head of Toolmaking at the Volkswagen Group. "Together with partners in the area of research, we are constantly exploring the boundaries of new processes. One of our goals is to apply metal printers in series production." The Volkswagen Group has a total of 14 toolmaking units in nine countries. Under the leadership of Prof. Dr.