Vehicle Specifics For 2009 Aston Martin Db9 2dr Volante on 2040-cars

Auto blog

Aston Martin Valkyrie set to make 1,000 horsepower, rev to 11,100 rpm

Aston Martin is working with Cosworth to develop the Valkyrie engine, an engine (we now know) unlike that found in any other production car. Today it has shared some of the specifics. The naturally aspirated 6.5-liter V12 will make 1,000 horsepower and rev up to 11,100 rpm. We did the math, that's 153.8 horsepower per liter in a non-boosted car. Cue the jaws dropping to the floor. The first thought here goes to what this thing will sound like. Aston has us covered there with a video it tweeted out this morning, which you can play below. Developed in conjunction with longtime technical partner @Cosworth, the new V12 had to satisfy a simple, yet extraordinary brief; to create the ultimate expression of the internal combustion engine. #AstonMartinValkyrie #ASTONMARTIN #Cosworth pic.twitter.com/BQXUVD355f — Aston Martin (@astonmartin) December 12, 2018 We got a sneak preview awhile back of the sound, and this just confirms how awesome it's going to be. The noises bring us back to a time when F1 engines actually sounded good. Peak power is made at an astounding 10,500 rpm, so you'll want to rev it all the way up to the top before shifting. Torque is predictably much lower — it makes 546 pound-feet at 7,000 rpm, when most engines are either done or running out of steam. Numbers for the Valkyrie's hybrid system are still unavailable, so we'll have to wait to find out the combined output. The large V12 weighs 454 pounds, and Aston says it's a fully stressed element of the chassis — removing the engine would literally split the car in two. Titanium connecting rods, F1-spec pistons and a billet-machined crankshaft that takes six months to produce are but a few highlights of the Cosworth engine. Aston Martin says the crankshaft is 50 percent lighter than the One-77's V12 rotating assembly. Thankfully, we've been provided with a gallery of engine photos to drool over. Making such a ridiculous and powerful engine emissions-compliant enough for a road car is something every car enthusiast can appreciate. Naturally aspirated V12s are arguably one of the most satisfying engine configurations to have been put forth on this earth. One that revs to 11,100 rpm sounds like it could crack anybody's list of greatest road car engines ever. Aston Martin sounds hyped about it, and we don't blame them. This car, and this engine, are going to be monsters. View 16 Photos Related video:

Aston Martin and Gentex show off tri-camera rearview mirror system for CES

More screens and cameras are headed for Aston Martin vehicles this decade, as Gentex and Aston have just jointly revealed a new tri-camera rearview mirror system. The tech will be on display next week in a 2020 Aston Martin DBS Superleggera at the 2020 Consumer Electronics Show. This tri-camera mirror system is similar to other camera mirror systems on the market today, but there’s a twist. Instead of the whole rearview mirror being one big screen, there are two smaller screens flanking the center display. These two additional screens display a feed from cameras on the carÂ’s two side mirrors. Camera side view mirrors already exist in some cars like the Audi E-Tron and Lexus ES in other markets, but the integration is different. Instead of replacing the side mirrors with tiny camera modules, Aston Martin is keeping the mirrors and simply adding a single camera to each one. Also, instead of displaying the side camera feeds near the A-pillars, itÂ’s routed into the small screens in the mirror itself. Gentex calls it the CMS (camera monitoring system), and while Aston Martin doesnÂ’t specify which models will get it, weÂ’re told to expect it on “future Aston Martin vehicles.” One of the aspects of this system Gentex stresses is that itÂ’s weather foolproof. Even if salt, snow or rain clouds/blocks one of the cameras, the traditional mirrors are still there to be used as a backup. Vehicles that use camera mirrors exclusively are engineered to make sure the view isnÂ’t inhibited, but Gentex doesnÂ’t want to take any chances with this system. The rearview mirror can function like a normal auto-dimming mirror, too, even though that camera is unlikely to become blocked from its placement just above the rear window. The biggest advantage we see in this setup is that one glance upward can give you a full idea of whatÂ’s going on behind and beside you. ItÂ’ll require some time in the driverÂ’s seat to decide if itÂ’s too much information and too many screens in one spot. WeÂ’ll reserve final judgement when it reaches that point. Since relying solely on camera mirrors is still not allowed in the U.S., this hybrid system might be the best way to take advantage of the tech. ThereÂ’s no timeline on production readiness, but anyone in Las Vegas going to CES can see it in action.

Q by Aston Martin makes a 430-hp V8-powered Cygnet

A V8-powered Aston Martin Cygnet with 430 horsepower and 361 pound-feet of torque could be the best definition of "Didn't see that coming" we've had all year. A customer requested the carmaker's customization arm, Q by Aston Martin — Commission, insert a 4.7-liter V8 from the last-gen Vantage S into the Cygnet's engine bay. The grafting job, dressed in Buckinghamshire Green, weighs 1,375 kilograms or 3,025 pounds with fluids, and posts a power-to-weight ratio of 284 hp-per-ton in U.S. parlance, 313 bhp/tonne in UK units. Aston Martin engineers shortened the intake system to keep the Cygnet's standard hood unmolested. The motor blows out the other end through a twin, centrally-mounted exhaust at the end of very short pipes. Other components carried over from the Vantage S include the front and rear subframes, suspension, most of the braking system, and seven-speed Sportshift II transmission. Torque steer isn't an issue, because the rears do the driving via a "miniature" torque tube that runs underneath a custom tunnel. Carbon wheel arches shield 19-inch wheels shod in 275/35 Bridgestone rubber, with six-piston monoblock calipers in front, four-piston monoblocks in back. In spite of Aston Martin calling this "The Ultimate City Car," additional modifications would indicate the owner has ultimate track plans for the V8 Cygnet. The Q department welded in a roll cage, occupants sit in fixed Recaro buckets with four-point harnesses, the driver grips a removable, Alcantara-covered steering wheel, there are leather pull straps on carbon door panels, a steel fuel tank fills the cargo area, and an FIA-compliant fire extinguisher system keeps things cool if the temperature gets too hot. Should the V8 Cygnet pretend to its city car origins, there's a Vantage instrument cluster, air conditioning, and two USB ports. Goodwood Festival of Speed visitors will get to see how she runs up the hill. The original Cygnet, based on the Scion iQ and out of production since 2013, got from 0-60 miles per hour in about 11 seconds. The V8 Cygnet does that in 4.2, and taps out at 170 mph — 60 mph past the standard Cygnet's top speed. Aston Martin says the original Cygnet "looks set to become a future classic." That could be optimistic. The V8 Cygnet, however, just might have the chops. Related Video: Featured Gallery Aston Martin V8 Cygnet View 12 Photos Aston Martin Hatchback Luxury Racing Vehicles Special and Limited Editions aston martin cygnet q by aston martin