Se Habla Espanol, Carfax 1 Owner, Nav, Sunroof, 2.4l Auto, Leather, Sunroof on 2040-cars

Auto blog

Acura NSX to race in GT3 or GTE

Honda is reportedly planning to roll out a racing version of the new Acura NSX. It just hasn't decided yet on which class it wants to enter it into, to whose specifications it will build it, and which department will be tasked with the project. The original NSX competed principally in Japan's own Super GT series. So did the subsequent HSV-010 GT that was originally designed to be the NSX's replacement. But Acura's new supercar is as much an American vehicle as a Japanese one, and as such it looks more likely to compete on American soil. The options which Honda is considering boil down to GTE and GT3. What's the difference, you ask? Until just a few years ago, international sports car racing was split between GT1, GT2, GT3, and (to a lesser extent) GT4 classes. GT1 was phased out in 2009, GT2 was reformatted into GTE (with both Pro and Am categories), while both GT3 and GT4 carried on. Today GTE is run at the 24 Hours of Le Mans and its associated championships around the globe: the FIA World Endurance Championship, the European Le Mans Series, the Asian Le Mans Series, and the United SportsCar Championship. Meanwhile GT3 is run in series like the Blancpain Endurance Series and a growing number of regional championships. (GT4 is run in lower-level series for amateur racers.) Acura currently runs the TLX-GT in the Pirelli World Challenge here in America. But as the series moves to GT3 specifications as well, the company is facing the decision of either adapting the existing racer to the new regulations (and coming away with a potentially compromised package), or replace it entirely. The NSX could prove just the ticket, however the GTE class may ultimately give it more exposure. Whichever rulebook Acura opts to play by, it likely won't be running under hybrid power – an element which would add complication but not necessarily much benefit under current regulations. The automaker will also have to decide who will develop the new NSX racer, with both California-based Honda Performance Development (HPD) and Italian outfit JAS Motorsport (which fields Honda's WTCC team) eyed as potential candidates. Related Video:

Acura MDX Luggage Test: How much fits behind the third row?

The Acura MDX shares its platform with the Honda Pilot, but that fact is really only obvious when you look at their rear seat floor plans. Both offer the unique, removable second-row middle seat, which means that buyers don't have to decide whether they want max capacity and a second-row bench, or the pass-through convenience of second-row captain's chairs. Both also boast a two-level cargo floor behind the third row, which is always a benefit here in Luggage Test land. But! The MDX does not have nearly as much room back there, regardless of whether you take advantage of the two-level floor's lower level (why wouldn't you?).  The MDX has two cargo volume specs for behind the third row: 16.3 and 18.1 cubic-feet. I think it's safe to assume the expanded number is with the floor in its lower position. The Pilot has 18.6 with the floor in place, and either 22.4 or 21.8 with the lower position. The latter's is the Pilot TrailSport's, which is what I conducted the luggage test on. Meanwhile, in the three-row luxury SUV realm, the current king of the castle is the Lexus TX. Telling you right now, the MDX ain't cracking that nut, but what about everything else I've tested? Let's see. Here is the space in question. Note that the floor does not need to be removed; it actually slides down, tucked just below that plastic trim, and rests upon the lower floor. Now, this obviously does raise the bottom floor by an inch versus removing the floor board entirely, so much like cargo covers in two-row vehicles, I decided to test with and without the floor inside. As with every Luggage Test, I use two midsize roller suitcases that would need to be checked in at the airport (26 inches long, 16 wide, 11 deep), two black roll-aboard suitcases that just barely fit in the overhead (24L x 15W x 10D), and one smaller green roll-aboard that fits easily (23L x 15W x 10D). I also include my wife's fancy overnight bag just to spruce things up a bit (21L x 12W x 12D). Well, I can safely say that the MDX's cargo area is narrower than the Pilot's (above right). I could not fit the same bags* head-to-head in the MDX as I could in the Pilot (* green bag is the blue bag's equally sized replacement). The underfloor area seems to be the same length, but it is considerably narrower.  As such, it's obvious the MDX won't be able to hold as many bags, or at least the same bags, as the Pilot could.  First, with the floor stored in its lower position inside the MDX. Two options.

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.