2010 Acura Tsx Base Sedan 4-door 2.4l on 2040-cars

Auto blog

Honda Civic Hatchback Luggage Test: How it compares with sedan and Integra

Well, we have a first here at Autoblog Luggage Test HQ: the first time I've done the next-generation of a make/model that's already been luggage tested. I know, right, very exciting. So, for the first time, I'll be able to report how a vehicle compares with its immediate predecessor. As this is the Honda Civic hatchback, I can also show you how it compares with the Honda Civic sedan and the mechanically related Acura Integra. So. Many. Comparisons! In short, the Civic is a definitive example of why you can't really compare the cargo volume figures of a sedan and a hatchback (or wagon, SUV or other hatchbacked vehicle). The specs say the hatchback has 24.8 cubic-feet of space whereas the Civic sedan has 14.8, yet as I'm about to show you, the sedan actually has more space for holding bags or whatever. This is already a phenomena I covered with the Integra and its 24.3-cubic-foot trunk. Apparently, that half a cube makes a difference as it was indeed easier to load bags into the Civic hatch.  Top Civic hatchback, bottom left Civic sedan, bottom right Integra Some key observations here with this trio. The Civic sedan is 4 inches longer than the Civic hatchback, almost all of which is behind the rear axle. This lends its trunk greater length than the hatchback, which is more useful for stuffing in luggage. The Civic hatchback (and Integra) have more height, which balloons the cubic-foot number, but doesn't really provide much help in this test since I don't pack to the roof for safety, visibility and consistency reasons. If you lower the back seats, it's a whole different ballgame, but I'll get to that later. Now, to the bags. As in every luggage test I do, I use two midsize roller suitcases that would need to be checked in at the airport (26 inches long, 16 wide, 11 deep), two roll-aboard suitcases that just barely fit in the overhead (24L x 15W x 10D), and one smaller roll-aboard that fits easily (23L x 15W x 10D). I also include my wife's fancy overnight bag just to spruce things up a bit (21L x 12W x 12D). You can really see the difference in trunk length here. In the sedan (above right), you can fit the small roller bag behind the four biggest bags lined up. Definitely can't do that in the hatchback above left. In short, all the bags fit in all the cars (with some asterisks). It was a much easier fit in the sedan, though, and you can see that there's some extra space on either side of the egg-crusher hinges.

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.

We drive the Acura TLX-GT racecar

Don't break the car. As you can tell from the video, that's the theme of the day at Gingerman Raceway in South Haven, MI. After two short lapping sessions in the Acura TLX-GT fear gave way to familiarity, and a second theme emerged: this is awesome. The anxiety was appropriate. There are only two TLX-GTs in the world, and both were at Gingerman that day. A mishap would potentially put either Ryan Eversly and Peter Cunningham out of contention for the subsequent Pirelli World Challenge race. I did not want to be that guy. But back to the awesome part. The TLX-GT is barely TLX, but more Acura that you might expect. The wheelbase, roof, and doors are all stock dimensions, although all the bodywork is carbon fiber. Out go the front MacPherson struts, in goes a special double-wishbone suspension. All-wheel drive comes from an XTRAC six-speed sequential transmission originally developed for Dakar Rally vehicles. The side mirrors are stock. Under the hood lies a 3.5-liter twin-turbo V6 with a stock block, head, crank, and throttle body. "Under the hood" is a generous term, though, because half of the engine sits inside the cabin. The front end of the block is aft of the front axle - the rest of the hood is taken up with radiators and hoses. To service the turbochargers, the RealTime mechanics remove the top of the dashboard. The front-mid engine location pushes the driver's seat back to the B-pillar, so you sit like Hightower from Police Academy. Only with less visibility. This does not calm the nerves. Nor does the din of 600 or so unmuffled horsepower. My first laps were understandably timid. But the TLX-GT is actually easy to drive. You get used to the low, rearward seating position almost immediately. Once rolling you don't need the clutch for shifts - just bang the right and left paddles to go up and down. I even became accustomed to the acceleration. At more than 3,000 pounds curb weigh the TLX-GT is quick, but not as explosive as cars like the Chevrolet Corvette Z06. Where the TLX-GT blows away road cars is in grip and braking, neither of which I fully exploited. The brake pedal is so hard you feel like you're standing on it just to get the pads to bite. Once engaged, they're like an endless well of deceleration, with ABS somewhere down at the bottom of the abyss. Second lapping session over, car returned intact and adrenaline high in full effect. I had the uncontrollable urge to get back behind the wheel. I mean, I barely had time to get up to speed.