Super Clean 1999 Acura Tl--special Mechanic's Special on 2040-cars

Auto blog

2019 Acura RDX infotainment first impressions | A first step into the touch pad world

One of the greatest design challenges in the modern automotive industry is an infotainment system that provides loads of capabilities, but is also easy-to-use and not overly distracting. Touch screens have been leading the way as the favored option, but Acura is trying a new design that relies on a touch pad with some unique tweaks to separate it from similar systems, such as those seen in competing Lexus models. And we got to try it out in the first production application, the 2019 Acura RDX compact crossover. The key feature of the touch pad is its one-to-one position functionality. What that means is that, if you have a grid of function buttons on the screen, tapping on, say, the upper left corner of the pad will highlight the button in the same area on the screen. And if you were to take your finger off the pad and tap in the opposite corner, that section of the screen would immediately be highlighted. You don't have to slide your finger across the pad to reach selections if you don't want to, and you don't have to slide back from the last function you highlighted. It basically does away with the need to move a cursor around like you would on a laptop with its mouse pad. In practice, it's a little odd to use at first because we mentally connect using a touch pad with the traditional cursor interface of the laptops we use day in and day out. As such, we forgot that we didn't have to scan the screen for the cursor every time we needed to select something. But once we remembered we could skip that, we found it quick and easy to drop our finger down and slide to our preferred function quickly. We could occasionally even pick something on the corners without having to slide at all. This is partly because Acura designed the interface to work with this pad. A representative from Acura's R&D center explained that they tried to put common functions on those corners because they're easy to reach without looking or thinking much. Another bonus to this system is that you don't immediately go to the function the second you press the pad. Instead, the feature is highlighted and still needs a physical click to enter. This is enormously helpful, since it virtually eliminates the chance of going to the wrong selection because you hit a bump or just got lazy with finger placement. Instead, you can get your finger in the right spot and then commit with a button press.

Here's a sneak peek at the 2023 Acura Integra interior

Photos: Zac Palmer / Autoblog DAYTONA BEACH, Fla. — Acura staged its Integra Prototype at a display at the Rolex 24 at Daytona this weekend, inviting enterprising amateur and professional photographers alike to sneak a peak at the interior thanks to the bright Florida sun. The photos you're looking at here are ones we took at Rolex, and they essentially reveal what the 2023 Acura Integra's interior will look like. If you recall from the car's initial reveal, Acura did not show photos of the Prototype's interior. Before we dive too deep, though, we can tell that while the design appears to be final, some of the finer details are still a bit rough. Not all of the plastics, surfaces and badging look final, so don't expect everything you see here to directly port over to production. That said, this is still an awesome sneak peek at the upcoming Integra that we weren't expecting to get. From what we can see here, the interior design seems to take a cue from the Integra's underpinnings, which can be traced back to the sporty Honda Civic Si. Photos posted to integraforums.com show the prototype's dash before Acura's reps covered the upper portion to hide it from view. In them, you can see the mesh air vent design that debuted on the Civic, albeit with a different execution here (that treatment runs the full width of the dash in the Honda). Plus, the touchscreen infotainment rising from the dash is also in plain view. The seats look like Acura's latest seat style as opposed to Civic Si seats, and they even feature a neat two-tone black and white design. What does appear to be a direct Civic rip is the steering wheel, which gains an Acura badge and what looks like the rough outline of an A-Spec badge for Integra duty. We'll note that this likely means that the Integra will be offered in A-Spec trim, just like every other new Acura on sale today. The original Integra was never sold as an A-Spec in the U.S., but the RSX Type S (named Integra outside the U.S.) was available in A-Spec trim. Another difference between the Integra interior seen here versus the Civic is a new door panel design. Very little changes in the rear bench, though, as it's featuring the same drop-down armrest and pair of USB ports for rear occupants. The Integra Prototype is notably longer than a Civic Hatchback, but we didn't see any discernible increase in utility in the back.

Honda celebrates 30th anniversary of the NSX with a look back at how it began

In 1989, the baseball-loving Japanese dipped their bats in pine tar and came to the U.S. to take gigundous swings. That single year launched five legends: Lexus LS400, Infiniti Q45, Nissan 300ZX Twin Turbo, Mazda MX-5 Miata, and Acura NS-X concept. The Chicago Auto Show (!) hosted the global debuts of the Mazda and the Acura. While Mazda celebrates the bygones with the 30th Anniversary Miata, Acura's reminiscing with a look at how the NSX — a car Motor Trend described in 1990 as, "[The] best sports car the world has ever produced. Any time. Any place. Any price ..." — came to be. The development yearbook opened in 1984, a year after Honda returned to Formula One as an engine supplier for the Spirit team, and for the second Williams chassis in the last race of the season. For the first time in the automaker's history, Honda wanted to build a production car with the engine behind the cabin, one that would demonstrate Honda's engineering prowess and "deeply rooted racing spirit." The sports car would also serve as a halo for the not-yet-launched Acura brand. The engineering team built the first test vehicle in February 1984 on the bones of a first-generation Honda Jazz. After four years of formal development, Honda parked the NS-X Concept in a conference room at Chicago's Drake Hotel in February 1989. This is where the media would meet the red wonder before the public show-stand debut. The F-16 Fighting Falcon-inspired coupe was built on the world's first all-aluminum monocoque, and its SOHC V6 ran with titanium connecting rods. Before the press conference, then-Honda president Tadashi Kume got in the NS-X, started the engine, and revved to the 8,000-rpm redline — a noise felt by everyone in the adjacent conference room attending a Ford press conference. Honda's PR man at the time yelled, "Mr. Kume, stop it! They're gonna hear this!" When Kume got out, he asked Honda engineers present why they didn't put their new VTEC technology in the NS-X. (What's Japanese for, "Why didn't the VTEC kick in, yo?!") They told him VTEC had been created for four-cylinder engines. Kume told them to work on a V6 application. More suggestions came from journos who drove the early prototypes at Honda's Tochigi R&D Center, who said the NS-X "could use more power." The development team had grabbed the SOHC V6 from the Acura Legend for the NS-X concept, and it put out 160 horsepower in the luxury sedan.