2013 Acura Tl Tech on 2040-cars

Auto blog

Acura recalls 106K MDX models for AC system bolt

The National Highway Traffic Safety Administration is announcing a recall covering the air conditioning system on 106,439 units of the 2014-2015 Acura MDX. The affected examples have production dates between April 23, 2013, and December 16, 2014. While the problem doesn't create a major safety concern, it could be very annoying when driving during the intense heat of the summer months. On these luxury crossovers, the bolts on the air conditioning compressor clutch drive might not have the proper anti-corrosion coating. This makes it more likely for them to eventually break, and if that happens the AC pulley could fall off the CUVs. Acura reports no injuries or crashes form the issue, and the company discovered the issue through warranty claims for the air conditioning not working. To repair the problem, dealers will replace the bolts. They'll also inspect the AC clutch plate and will replace it if necessary, as well. The repairs for some owners should already be in progress, according to NHTSA. Related Video: RECALL Subject : A/C Compressor Clutch Drive Bolts may Corrode Report Receipt Date: JUL 01, 2015 NHTSA Campaign Number: 15V417000 Component(s): EQUIPMENT Potential Number of Units Affected: 106,439 All Products Associated with this Recall Vehicle Make Model Model Year(s) ACURA MDX 2014-2015 Details Manufacturer: Honda (American Honda Motor Co.) SUMMARY: Honda (American Honda Motor Co.) is recalling certain model year 2014-2015 Acura MDX and MDX AWD vehicles manufactured April 23,2013, to December 16, 2014. The affected vehicles have air conditioning compressor clutch drive bolts that may not have received the proper anti-corrosion coating. CONSEQUENCE: If a bolt was not coated, it may corrode and break as a result. If the bolt breaks, the compressor clutch plate may separate from the vehicle, possibly becoming a road hazard. REMEDY: Honda will notify owners, and dealers will replace the air conditioning compressor clutch drive bolt and install a new clutch plate if necessary, free of charge. The recall is expected to begin July 31, 2015. Owners may contact Acura client relations at 1-800-382-2238. Honda's number for this recall is JQ7. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Statement by Acura Regarding Air Conditioner Clutch Drive Bolt Recall: 2014-2015 Acura MDX Jun 25, 2015 - TORRANCE, Calif.

2023 Acura Integra looks a little Civic-like in spy photos

After a couple of fairly revealing teasers, we finally have a good look at what seems to be the real-life 2023 Acura Integra. It comes to us via a member of IntegraForums.com, and, certainly a number of the styling cues match up to the teasers, but we're also detecting a bit of Civic influence. Of course, that wouldn't be a surprise considering the size of the upcoming Integra, or even the model's history. Up at the front, the Integra is Acura business as usual. It has the hawk-eye headlights and wide pentagonal grille with a sort of starburst grille mesh. The hood has nice creases and curves that flow into the front fascia. Along the sides are where we see a bit of what seems like Civic influence bleed through, mainly with the greenhouse. The shape of the windows and frames in the doors look very close to those on the Civic hatchback. Even the door-mounted mirrors look similar. But there are aspects that differentiate it. Most notably, there seems to be a diagonal crease that starts low on the front wheel well and rises up toward the rear fenders. It gives the car a lower, more curvy look than the square-shouldered Civic. It also helps add some visual heft to the rear fenders. At the back, the hatchback design is obvious, and also lends further credence to our theory the car is Civic-based. But obviously it's been majorly tweaked for the Acura. The bottom sill for the hatch looks much higher than on the Civic, and the shut line matches the slender taillights (which seem to be dead ringers for the teaser rendering). All of this helps the tail of the Acura look low and wide, including the location of the license plate in the bumper instead of the hatch. So it seems like the Integra will be based on the Civic, but with plenty of changes. And that's pretty much how the Integra and even its interim replacement, the ILX, have been. They've all been derived from the Civic, often with major design and mechanical differences. Also, with how excellent we've found the new Civic, it's a great starting point for Acura's new entry-level model. The car will be revealed fully next spring, and we should have many more details then. Related Video: 2022 Honda Civic Hatchback Sport Touring Inside and Out | Autoblog

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.