2010 Acura 4dr Sdn 2wd Tech on 2040-cars

Auto blog

Acura prices hand-built TLX PMC Edition at $50,945

Acura unveiled the 2020 TLX PMC Edition sedan at this year's New York Auto Show along with the MDX PMC Edition Prototype. Both models adopt the same hand-finished build processes employed at Honda's Performance Manufacturing Center to create the Acura NSX. In the case of the sedan, that means a body-in-white pulled off the line at Honda's Marysville plant so that PMC technicians can install the interior, drivetrain, suspension, wiring harnesses, and electronics. After that, the TLX PMC undergoes the same quality control checks conducted on the NSX, including a dyno run and water leak test. The price: $50,945, which includes $1,995 for handling and destination. In addition to the craftsmanship, the sedan combines two options that normally cannot be combined, the A-Spec and Advance Packages. They install the 290-horsepower 3.5-liter V6 and Super Handling All-Wheel Drive, the A-Spec's stiffer dampers and quicker steering ratio, plus sharper exterior components like the restyled bumper, larger exhaust tips, and gloss black roof panel. Comfort features include heated and ventilated front sport seats, leather and Alcantara seating, black leather steering wheel, black headliner, surround-view camera, heated rear seats, and Acura's 10-speaker ELS Studio audio system. Cosmetic go-fast changes are seen in the red instrument cluster and red accent lighting. The whole package gets drenched in Valencia Red Pearl paint formerly exclusive to the NSX but making one special appearance here, the crimson infused with mica, metal flake and "nano pigments" for keener color. Black, 10-spoke, 19-inch wheels anchor the sedan to the road. The U.S. will see just 360 examples of the TLX PMC, each one numbered with a plaque on the dash. Deliveries to dealers begin this month — each sedan transported in a single-car carrier. The entire production run is scheduled to take six months, after which we're told Acura will begin working on the MDX PMC.

2024 Acura Integra Type S revealed as the luxurious foil to the Type R

The 2024 Acura Integra Type S is exactly what we imagined it might be. Acura took all the Civic Type R go-fast parts and shoved them into the Integra, but then added luxuries the Type R is missing and fettled with a few performance bits. Just as was teased ahead of time, the Integra Type S is fitted with a 2.0-liter turbocharged four-cylinder that produces 320 horsepower and 310 pound-feet of torque — thatÂ’s up five horses over the Type R. ItÂ’s fitted with a six-speed manual transmission (no auto available) and sends its power through the front wheels via a helical-type limited-slip differential. The same dual-axis front suspension design pioneered by the Type R to quell torque steer is on display here, so you should expect little to no torque steer from the Integra. Of course, all that extra power meant Acura needed much more cooling capability, leading them to design a much more aggressive and air-hungry front end for the Integra. In fact, every single body panel from the A-pillars forward is unique to the Type S. The larger top and lower grilles and vented hood improve airflow by 170% versus a standard Integra, Acura says. Look to the sides, and youÂ’ll see dramatic fender flares both in front and rear that accommodate the massive 265-section-width Michelin Pilot Sport 4S summer tires that wrap around 19-inch wheels — the Type S is 2.8 inches wider than a standard Integra. For those wondering, yes, itÂ’s the same tire package as youÂ’ll find on a Type R. Out back, youÂ’ll notice substantial diffusers flanking a new triple-tipped center-mounted exhaust. Said exhaust is less restrictive than the Type R, features an active exhaust valve and adjusts depending on the drive mode. Acura says a special “pops and bangs” auditory experience presents itself in “Sport+” mode. The suspension tuning is another differentiator between the Integra Type S and Civic Type R. It uses the same adaptive damper system as the Civic, but Acura adjusted the tune for the Type S in its Comfort, Sport and Sport+ driving modes, presumably to be more street-friendly. Acura emphasizes that this car delivers “ultimate street performance” numerous times in its press release, suggesting that the Integra is set up as more of a daily driver, while the Civic Type R is very much designed to excel on the racetrack.

Acura NSX bodywork to be sheathed in zirconium e-coat, fewer paint layers

Automakers make halo cars to drum up excitement and show off what they can do, but there's more to it than that. Advanced platforms allow a company's engineers to experiment with all sorts of technologies. And in the case of the upcoming new Acura NSX, that includes new paint processes.
Speaking with Autoline in this video interview, Honda's North American Senior VP Jon Minto talked about an innovative zirconium e-coat which it's applying to the new NSX. Unlike some experimental paints developed for Formula One, however, this coating is not designed to minimize drag or enhance cooling: it's designed to be more environmentally friendly.
It's one of a few measures which Honda is implementing on the NSX before expanding it to more accessible models, along with another process that uses fewer coats to reduce energy consumption by 40 percent. Watch the interview with Autoline host John McElroy right here.