2005 Acura Tl Base Sedan 4-door 3.2l 6-spd Manual Black On Black on 2040-cars

Auto blog

Acura announces NSX GT3 Evo22 race car will live on

The Acura NSX may be winding down production in 2022, but it still has some life left on the track. Today, Acura announced that it will introduce a new version of its NSX GT3 race car. It features a slew of improvements that should make the platform more competitive. Called the NSX GT3 Evo22, it builds upon the existing NSX GT3 a car that has won multiple championships in IMSA, SRO and Japan's SuperGT. The Evo22 gets improved intercoolers for the 3.5-liter twin-turbo shared with the road car, allowing it to perform consistently in a wider range of conditions and locations. Underneath, the suspension earns some tweaks in revised spring rates and geometry adjustments. To improve the car for endurance racing, the Evo22 reduces pit time with larger fluid tanks, while a revised wheel system allows for quicker tire changes. An FIA-mandated rain light illuminates the rear. Acura will also offer several air conditioning and headlight options. As with the outgoing NSX GT3, the Evo22 eschews the road car's hybrid and all-wheel-drive systems. Instead, it employs an XTRAC semi-automatic six-speed sequential transmission to send power to the rear wheels. Both the race and road car, however, share the same specs for the engine block, heads, valvetrain, crankshaft, pistons, and dry-sump lubrication system. The motors and chassis are both built at Acura's Performance Manufacturing Center in Ohio, while final assembly for the GT3 takes place in Milan, Italy. While European GT3s are supported from Italy, Honda Performance Division in Southern California will support North American teams. The NSX GT3 is the defending IMSA GTD and SRO GT Manufacturers’ Champion, and has achieved 25 IMSA and SRO class wins since its North American introduction in 2017. Interestingly, Acura says the the NSX GT3 is homologated globally through 2024. So, while new road cars won't be produced after next year, you'll still see them representing the "A" calipers at the track beyond that.

2022 Acura RDX update makes a lot of good stuff standard

When the third-generation Acura RDX launched for 2019, our test drive found it to be a fine return to form for the Acura brand. Not only did it cast aside the humdrum personality of the second-gen, but it gave itself a reason to exist in the crowded luxury compact crossover field. In fact, it landed competitively mid-pack amongst the German Grossen Drei of Mercedes, Audi and disappointing BMW. Though we did have a gripe about how certain packages weren't available on certain trims, with the 2022 update Acura has rectified that very complaint. We'll get to that in a minute, but first let's start with the base RDX. Acura says that one of the biggest improvements comes in the form of noise, or lack thereof. We didn't think the 2019 model was particularly noisy, but  Acura says the cabin is "dramatically quieter." Though they don't provide a decibel reading, they do inform us that a retuned Active Sound Control system and new front fender liners help reduce road noise. New for 2022, the next-level-up Technology Package takes noise reduction even further, with thicker carpets and acoustic glass in the front doors. New sound insulation in the those doors, under the dash pad and in the D-pillars also help keep road, wind and engine noise out of the cabin. The package also comes with a rear camera washer. The top-spec Advance Package adds even more sound deadening material to the headliner, dash, hood, drivetrain tunnel and rear hatch. Here, the rear doors get acoustic glass and noise insulation to match the fronts as well. Power-folding side mirrors and a 12-volt power outlet in the cargo round out the changes for 2022. Best of all — and this is the nit we picked in our 2019 test drive — the sporty A-Spec package is at last offered with the Advance Package. This wasn't the case before, inexplicably leaving the adaptive dampers off of A-Spec models. Now the look finally matches the equipment. In addition, A-Spec cars get some of their exterior bits dipped in gunmetal and gloss black finishes set them apart visually. Inside, a flat-bottomed sport steering wheel is unique to the package, along with other interior exclusives and an available bronze finish on interior aluminum bits if you choose the Saddle Brown upholstery. If those aren't special enough, Acura is once again offering a limited-production PMC Edition of the 2022 RDX.

New TLX A-Spec leads Acura's three-car Pike's Peak attack

Once again, Acura is headed to Pikes Peak for the hillclimb on June 25 with a small group of machines. This year the focus is on the TLX, with two vehicles bearing the sedan's name and shape. The two cars are very different, though, and will compete in two different classes. The first is the TLX A-Spec. This started life as a production TLX, but the 3.5-liter V6 has been reworked with pistons, rods, camshafts, and a valvetrain from Acura's TLX GT race car. The engine also has a turbocharger, which helps the V6 make an impressive 500 horsepower. All those ponies go to the front wheels through a limited-slip differential. In addition to the powertrain upgrades, the interior has been gutted, and a big wing and front splitter fitted. The A-Spec will compete in the Pikes Peak exhibition class. The other TLX is a TLX GT. This is the type of car from which the A-Spec borrows engine components, but not the TLX GT's twin-turbocharger system. TLX GTs have already been competing in motorsports, specifically in the Pirelli World Challenge. Acura did make some changes to this car for Pikes Peak, though. The suspension and engine computer have been tweaked, gear ratios shortened, and additional aerodynamic bits added for more downforce. The TLX GT will compete in the open class. Despite the focus on the TLX, Acura is still bringing an NSX to the hill climb. This car is similar to the one that raced in the Time Attack 1 class last year, but has some changes for the Time Attack 2 class. Most notable of these changes are the massive rear wing and front splitter. According to Acura, these aerodynamic aids were based on those used for the NSX GT3 race car. Acura also reduced weight, changed the tuning on the engine computer, and fitted sticky R-compound tires. Related Video: Featured Gallery Acura Pikes Peak race cars View 9 Photos Image Credit: Acura Motorsports Acura Coupe Racing Vehicles Sedan acura tlx acura tlx gt