2001 Acura Tl Sedan Automatic on 2040-cars

Auto blog

2023 Acura Integra revealed with Civic Si power at $30,000

It's been a couple of decades, but the storied Acura Integra nameplate is returning to the road as a 2023 model. The Civic-based Acura sedan borrows the sporty Si's 1.5-liter, turbocharged 4-cylinder and 6-speed manual transmission with its limited-slip differential, though the exact specs still remain up in the air.  The prototype was shown in a new color dubbed "Indy Yellow," which pays homage to the iconic Phoenix Yellow finish offered on the Integra Type R. It rides on 19-inch five-spoke wheels over Brembo brakes.  “The Integra is one of the most iconic models in Acura's history,” said Jon Ikeda, vice president and Acura brand officer. “This new Integra will continue to deliver on the original's unique aspirational yet attainable market position, with emotional performance and style, combined with the versatility and utility sought after by today's buyers.” While the powertrain may be borrowed from the Civic, it will likely be tuned slightly differently. It produces a nice, round 200 horsepower in the Si, and since Acura noted that it will be a "high-output" engine, we're expecting them to squeeze a little extra something out. Don't expect miracles, however; the Civic Type-R gets a 2.0-liter mill for a reason. Beyond that, Acura is being tight-lipped for now, but a product planner told Autoblog that the Integra won't share a single body panel with the Civic. It's a couple inches longer than the Civic sedan. He suggested that we'd see a performance model eventually, and maybe it would be Type S, but no hard confirmation. The planner also said that, as far as the trend toward retro design in models like the Toyota Supra or Nissan Z, Acura did not set out to design something retro. Instead, they wanted to make something that looked like what the Integra would have evolved into today, had it never been discontinued. The grille sports the new look we can expect to see across the Acura product lineup, slightly refined from the existing look, and frameless. Acura says the Integra will go into production in 2022 at its Marysville, Ohio, facility. 

Honda celebrates 30th anniversary of the NSX with a look back at how it began

In 1989, the baseball-loving Japanese dipped their bats in pine tar and came to the U.S. to take gigundous swings. That single year launched five legends: Lexus LS400, Infiniti Q45, Nissan 300ZX Twin Turbo, Mazda MX-5 Miata, and Acura NS-X concept. The Chicago Auto Show (!) hosted the global debuts of the Mazda and the Acura. While Mazda celebrates the bygones with the 30th Anniversary Miata, Acura's reminiscing with a look at how the NSX — a car Motor Trend described in 1990 as, "[The] best sports car the world has ever produced. Any time. Any place. Any price ..." — came to be. The development yearbook opened in 1984, a year after Honda returned to Formula One as an engine supplier for the Spirit team, and for the second Williams chassis in the last race of the season. For the first time in the automaker's history, Honda wanted to build a production car with the engine behind the cabin, one that would demonstrate Honda's engineering prowess and "deeply rooted racing spirit." The sports car would also serve as a halo for the not-yet-launched Acura brand. The engineering team built the first test vehicle in February 1984 on the bones of a first-generation Honda Jazz. After four years of formal development, Honda parked the NS-X Concept in a conference room at Chicago's Drake Hotel in February 1989. This is where the media would meet the red wonder before the public show-stand debut. The F-16 Fighting Falcon-inspired coupe was built on the world's first all-aluminum monocoque, and its SOHC V6 ran with titanium connecting rods. Before the press conference, then-Honda president Tadashi Kume got in the NS-X, started the engine, and revved to the 8,000-rpm redline — a noise felt by everyone in the adjacent conference room attending a Ford press conference. Honda's PR man at the time yelled, "Mr. Kume, stop it! They're gonna hear this!" When Kume got out, he asked Honda engineers present why they didn't put their new VTEC technology in the NS-X. (What's Japanese for, "Why didn't the VTEC kick in, yo?!") They told him VTEC had been created for four-cylinder engines. Kume told them to work on a V6 application. More suggestions came from journos who drove the early prototypes at Honda's Tochigi R&D Center, who said the NS-X "could use more power." The development team had grabbed the SOHC V6 from the Acura Legend for the NS-X concept, and it put out 160 horsepower in the luxury sedan.

Acura replaces chief Accavitti with designer Ikeda

Acura is shaking up its senior leadership, as Honda ushers the current chief of its luxury division out the door and replaces him with a new one. Exiting stage left is Mike Accavitti, who held the reins at the premium automaker as its senior vice president and general manager of the Acura division. Taking his place will be Jon Ikeda, one of the Japanese automaker's most senior designers. Accavitti (pictured above at left) had been promoted to the job from his previous position as senior vice president of auto operations after Honda separated the Acura brand into its own division. He had previously served as a senior executive at Chrysler, rising up the ranks to run the Dodge brand, and joined Honda in 2011 as its chief marketing officer. At this point it remains unclear why Accavitti is leaving and where he might land, but Honda says he's leaving the company altogether. To replace Accavitti, Honda has named Jon Ikeda (pictured above at right), a veteran designer with the company. A graduate of the Art Center College of Design in Pasadena, CA, Ikeda has worked for Honda on both sides of the Pacific since 1989. He previous headed up the design and product planning divisions at Honda's American R&D operations, and was instrumental in creating an independent design office for the Acura brand, separate from Honda's. This isn't the first time we've seen Accavitti replaced in his role as a senior executive by a design veteran. After only four months at CEO of the Dodge brand, he was replaced by Ralph Gilles, who retained his role as senior vice president of design for the entire Chrysler group in parallel. Gilles was ultimately replaced as head of Dodge as well, but was recently promoted to serve as head of design for Fiat Chrysler Automobiles. Related Video: Acura Announces Leadership Changes TORRANCE, Calif. July 27, 2015 – Acura today announced that Jon Ikeda has been promoted to Vice President and General Manager of the Acura Division of American Honda Motor Co., Inc. In this role, Ikeda will oversee all Acura brand activities including sales, marketing and parts and service. Ikeda was formerly Division Director of Auto Design at Honda R&D Americas, Inc. (HRA). He began his career at Honda in Japan in 1989, joining the advanced design studio in Tokyo, where he worked on the award-winning Honda FSX show car. After six years in Japan, he returned to Los Angeles in 1995, to continue his career at Honda R&D in Torrance, California.