07 Type S Navigation Manual Rear Camera Leather Heated Seats Sunroof Bluetooth on 2040-cars

Auto blog

2019 Acura RDX crossover gets turbocharged power, A-Spec version

NEW YORK — Calling the RDX that Acura showed at this year's Detroit Auto Show a "concept" was stretching that term to the limits of credulity. The production version of the 2019 RDX is here, and this turbocharged crossover with available AWD looks darn near identical. While it offers all-wheel drive like its Lexus NX and Audi Q3 competitors, Acura's next-generation SH-AWD should be a serious selling point. Let's cover that "Super Handling All-Wheel Drive" system for a moment. It takes power from the 2.0-liter, 272 horsepower and 280 pound-feet of torque engine and routes it up to 70 percent rearward, and there's real torque vectoring (rather than brake-based faux vectoring) to shift 100 percent of that rear axle power to either wheel. The broad strokes are similar to the outgoing model's system, but there's much more available rear power bias — in the 2016 model, up to 40 percent could be sent to the rear. And that was up from 25 percent for pre-2016 models. The takeaway is that the RDX should handle a lot better on both dry and slippery pavement, and feel a bit sportier doing it. A new engine may help as well. The outgoing 3.5-liter V6 is replaced by a turbocharged four-cylinder, almost certainly related to the unit in the Accord and Civic Type R, and tuned somewhere in between those cars (252 and 306 horsepower, respectively). We expect the new engine to be lighter than the old V6, and less weight off the front end should improve steering feel and handling. For those keeping track, the new engine is down 7 horsepower but up 28 pound-feet in torque, and thanks to turbocharging the torque band starts down low and is relatively flat, so more oomph from a stop and on through the rev range. The six-speed automatic is gone, replaced by a 10-speed automatic. Most of its competitors use six- or eight-speed units, so that'll be a marketing focus. As you'd expect, the individual ratios are closer-spaced but the total ratio spread is, according to Acura, 62 percent wider than the outgoing automatic. There are steering-wheel-mounted paddles if you'd like to shift yourself. Since the styling is very much a lightly retouched Prototype RDX from the Detroit show, it's nice to be able to give a sense of the new car's proportions with hard numbers. First of all, it's riding on a 2.6-inch longer wheelbase. Overall length is 187 inches, up from 184.4, and width is unspecified.

Acura NSX ScienceofSpeed Dream Project brings another wing to SEMA

Acura rolled into SEMA last year with its non-hybrid NSX GT3 race car, that FIA spec-series competitor pulled to Vegas on a trailer behind a GT3-themed Acura MDX. Sticking with the GT3 theme this year but going road-legal, Acura worked with Arizona-based ScienceofSpeed on a GT3 package that NSX owners can put in driveways. The result is the lower, more powerful, more wing-y NSX "Dream Project." Liquid-cooled injecting for the twin-turbo boosts output, adding 37 horsepower for a total of 610, and another 31 pound-feet of torque to register 507. A lightweight steel exhaust sheds 16 pounds and bestows those magnified numbers with magnified bass. A custom suspension drops the coupe by a little more than an inch, a custom iLIFT suspension add-on automatically raises the front axle two inches if the NSX detects a hurdle. The ScienceofSpeed aero kit includes all you'd expect from the alphanumeric "GT3:" front strakes, wider rocker panels, larger rear diffuser, a rear wing, gold powdercoated carbon ceramic Brembo brakes, and wider Pirelli Trofeo R tires wrapped around Advan GT forged wheels. Drench the package in two-tone Andaro Nouvelle Blue Pearl and gloss black roof, and the NSX Dream Project's ready to be driven from climate-controlled garage, to parking-lot car show, back to climate-controlled garage. If the owner decides to test a limit or two, Recaro Pole Position seats and a gaugeART OLED display will keep him locked in and informed. Related Video:

2019 Acura RDX compact crossover goes into production in Ohio

Acura has kicked off production of the all-new 2019 RDX, capping a $54 million investment in new technologies and processes at its plant in East Liberty, Ohio, where the compact crossover will be built. It goes on sale starting in June, though prices are yet to be announced. The RDX is Acura's best-selling model, and the 2019 model was designed and developed in the U.S. for the first time. Acura says it's the first in a new generation of vehicles based on its Precision Crafted Performance brand direction, which is based on the Precision Concept and Precision Cockpit concepts from 2016. Honda's investment in its East Liberty Auto Plant brought two firsts for a mass-produced Acura: a new roller hemming process for the crossover's large panoramic sliding moonroof and the use of high-performance structural adhesives to increase body rigidity. It also gets a new multi-layer paint system to handle the new premium exterior color options. The RDX is powered by a 2.0-liter four-cylinder VTEC Turbo engine built in nearby Anna, Ohio. It makes 272 horsepower and 280 pound-feet of torque and is paired with Acura's 10-speed automatic, made at the company's transmission plant in Tallapoosa, Ga. Also notable is the "Super Handling All-Wheel Drive" system, which shifts more power to the rear axle to improve handling. It also gets a new, lightweight Acura-only platform that stiffens the body and adds more interior room and cargo space. Acura is also debuting a new True Touchpad Interface in the RDX that offers a unique one-to-one position with the 10.2-inch center display screen that works a little differently than a traditional cursor interface. You can read our review of it here. Related Video: Featured Gallery 2019 Acura RDX production Image Credit: Acura Plants/Manufacturing Acura Crossover acura rdx