2003 Acura Rsx Single Owner, Great Condition on 2040-cars

Auto blog

Acura MDX design lead details the crossover from beginning to today

Catalin Matei, principal designer at Acura, was the exterior design lead for the original 2001 MDX and had the same job for the new MDX Prototype. That’s just plain cool, and it makes him the MDX person of record when it comes to design.  Thankfully, Acura put him in front of a camera with the original and the new Prototype to talk design. That video is at the top of this post. MateiÂ’s background gives him a unique perspective on how MDX design has changed throughout the years. In the video, he walks us through his and AcuraÂ’s thinking and rationale for the three-row crossoverÂ’s design both then and now. ItÂ’s a great watch, as you learn how AcuraÂ’s crossover design philosophy has changed over the years. Where the original design tried to be elegant and clean, the new MDX takes a stab at sportiness and performance. This line of thinking is in tune with all of AcuraÂ’s most recent designs following the “Precision Crafted Performance” mantra. 2001 Acura MDX View 11 Photos Specifics on how the carÂ’s design has changed are called out by Matei. For example, grille design — itÂ’s much bigger now! The character line that wrapped around the original MDX has moved upward in the new MDX. This gives the new crossover a broad-shouldered and strong look that the old MDX just didnÂ’t have. And you probably wouldÂ’ve never guessed this, but the bodyside sculpting was inspired by the rocks in the Antelope Canyon. WeÂ’re not totally convinced.  One downside from the slick and “sporty” design may be unintentionally called out. The third row of seats is almost entirely shrouded by the body, as opposed to the massive windows in the original MDX. Those in the rearmost seats will have a much more claustrophobic experience than everybody else in the car. If you want all the details we know about the upcoming next-gen MDX, check out our reveal post here. Also, bookmark this page. WeÂ’ll check back in with Matei 20 years from now for the 2040 Acura MDX reveal. Related gallery: MDX Prototype View 35 Photos

Mid-engine Honda sports car surfaces in EU patent drawings

Based on new patent drawings, Honda clearly isn't done with sports cars. The design you see above was registered and published by the European Union Intellectual Property Office (EUIPO) and was first reported by AutoGuide. The drawings show a rakish, angular sports car design that is very clearly mid-engine. It could almost pass for a Lamborghini. But the name on the design is Honda Motor Company, and aside from the name, it bares a strikingly similar appearance to a mid-engine design found in a Honda patent two years ago. In fact, the only major difference between this car and the older one (seen below) is the lack of a windshield and top. The shape of the lights and the grille, as well as the front fender vent and character lines running from it, are reminiscent of the S660 kei roadster for Japan. The large, angular intakes look more related to the Acura NSX, though. View 6 Photos Unlike the previous patent renderings of the car, this one has an interior, and the inclusion of it may be why the top and windshield are absent. The interior also leads us to believe that this design is for an upcoming concept. The steering wheel is a small, rectangular piece similar to what you would find in an F1 car or Indy car. The seats also look like thin buckets designed to be as sporty and light as possible. A production version would probably have a bit more cushioning and a round wheel. It does look like there is a pushbutton transmission setup in the center console like current Acuras, though. So what does this mean? Honda is clearly still working on this design, and based on some of the more radical design choices for the interior, we're likely looking at a concept car that will show up in the next couple of years. Whether a concept will lead to a production car is tough to say. There's definitely room in Honda's global sports car roster between the S660 and NSX for something in between, and Honda has reported that it's getting pressure from dealers for sporty cars. The exterior design isn't so extreme it couldn't be tweaked for production, either. There have also been rumors that Honda is preparing a mid-engine hybrid sports car with the Type R's turbocharged four-cylinder. Honda also holds a trademark for the name "ZSX," which fits the naming scheme of the NSX and old RSX, but at least in Europe, Honda has held the trademark since 2009. We'll just have to wait and see what Honda does.

2020 Acura TLX PMC Edition will be hand-built alongside the NSX

At next week's 2019 New York International Auto Show, Acura will reveal a pair of new models, the 2020 TLX PMC Edition and MDX PMC Edition Prototype. The duo will be limited-run models that get final assembly at Honda's Performance Manufacturing Center (PMC) in Marysville, Ohio, along the same production line as the Acura NSX. The TLX PMC Edition goes on sale this summer with a starting price of around $50,000. Production will be limited to just 360 models hand-assembled over a six-month period. The production version of the MDX PMC Edition will be built sometime after the TLX PMC run is complete. Think of the TLX PMC as an A-Spec performance model with features available with the Advance Package like a surround-view camera, heated rear seats, a heated steering wheel and power folding mirrors. Currently, the two packages are mutually exclusive. There are no performance upgrades beyond what the A-Spec already offers. Power from the 290-horsepower 3.5-liter V6 is sent to all-four wheels through a nine-speed automatic. The TLX PMC uses Acura's Super-Handling All-Wheel Drive (SH-AWD) to manage the power at each wheel. It also gets the A-Spec's stiffer dampers and quicker steering ratio. 2020 Acura TLX PMC Edition View 11 Photos The exterior design, too, is based on the TLX A-Spec, with a restyled front bumper, dark chrome trim, larger exhaust tips and a black spoiler. Likewise, the interior is based on the A-Spec trim, with heated and ventilated front sport seats, leather and Alcantara seating, a black leather steering wheel, a black headliner, a red instrument cluster and red accent lighting. Black 19-inch 10-spoke wheels and Valencia Red Pearl paint are exclusive to the TLX PMC. The paint uses mica, metal flake and super-high transparency nano pigments to give it a richer color and was previously only available on the NSX. The roof panel, door handles, grille and lower bumper are also gloss black. What makes the TLX PMC Edition (as well as the future MDX PMC) truly special is the hand assembly. Basically, the body-in-white (a basic unfinished unibody) will move from the main assembly plant in Marysville to the nearby Performance Manufacturing Center. There, workers will install the drivetrain, suspension, wiring harnesses and electronics. The car then goes to the paint booth before the interior is installed.