2005 White Acura Nsx-t on 2040-cars

Auto blog

Acura prices hand-built TLX PMC Edition at $50,945

Acura unveiled the 2020 TLX PMC Edition sedan at this year's New York Auto Show along with the MDX PMC Edition Prototype. Both models adopt the same hand-finished build processes employed at Honda's Performance Manufacturing Center to create the Acura NSX. In the case of the sedan, that means a body-in-white pulled off the line at Honda's Marysville plant so that PMC technicians can install the interior, drivetrain, suspension, wiring harnesses, and electronics. After that, the TLX PMC undergoes the same quality control checks conducted on the NSX, including a dyno run and water leak test. The price: $50,945, which includes $1,995 for handling and destination. In addition to the craftsmanship, the sedan combines two options that normally cannot be combined, the A-Spec and Advance Packages. They install the 290-horsepower 3.5-liter V6 and Super Handling All-Wheel Drive, the A-Spec's stiffer dampers and quicker steering ratio, plus sharper exterior components like the restyled bumper, larger exhaust tips, and gloss black roof panel. Comfort features include heated and ventilated front sport seats, leather and Alcantara seating, black leather steering wheel, black headliner, surround-view camera, heated rear seats, and Acura's 10-speaker ELS Studio audio system. Cosmetic go-fast changes are seen in the red instrument cluster and red accent lighting. The whole package gets drenched in Valencia Red Pearl paint formerly exclusive to the NSX but making one special appearance here, the crimson infused with mica, metal flake and "nano pigments" for keener color. Black, 10-spoke, 19-inch wheels anchor the sedan to the road. The U.S. will see just 360 examples of the TLX PMC, each one numbered with a plaque on the dash. Deliveries to dealers begin this month — each sedan transported in a single-car carrier. The entire production run is scheduled to take six months, after which we're told Acura will begin working on the MDX PMC.

2019 Acura RDX crossover gets turbocharged power, A-Spec version

NEW YORK — Calling the RDX that Acura showed at this year's Detroit Auto Show a "concept" was stretching that term to the limits of credulity. The production version of the 2019 RDX is here, and this turbocharged crossover with available AWD looks darn near identical. While it offers all-wheel drive like its Lexus NX and Audi Q3 competitors, Acura's next-generation SH-AWD should be a serious selling point. Let's cover that "Super Handling All-Wheel Drive" system for a moment. It takes power from the 2.0-liter, 272 horsepower and 280 pound-feet of torque engine and routes it up to 70 percent rearward, and there's real torque vectoring (rather than brake-based faux vectoring) to shift 100 percent of that rear axle power to either wheel. The broad strokes are similar to the outgoing model's system, but there's much more available rear power bias — in the 2016 model, up to 40 percent could be sent to the rear. And that was up from 25 percent for pre-2016 models. The takeaway is that the RDX should handle a lot better on both dry and slippery pavement, and feel a bit sportier doing it. A new engine may help as well. The outgoing 3.5-liter V6 is replaced by a turbocharged four-cylinder, almost certainly related to the unit in the Accord and Civic Type R, and tuned somewhere in between those cars (252 and 306 horsepower, respectively). We expect the new engine to be lighter than the old V6, and less weight off the front end should improve steering feel and handling. For those keeping track, the new engine is down 7 horsepower but up 28 pound-feet in torque, and thanks to turbocharging the torque band starts down low and is relatively flat, so more oomph from a stop and on through the rev range. The six-speed automatic is gone, replaced by a 10-speed automatic. Most of its competitors use six- or eight-speed units, so that'll be a marketing focus. As you'd expect, the individual ratios are closer-spaced but the total ratio spread is, according to Acura, 62 percent wider than the outgoing automatic. There are steering-wheel-mounted paddles if you'd like to shift yourself. Since the styling is very much a lightly retouched Prototype RDX from the Detroit show, it's nice to be able to give a sense of the new car's proportions with hard numbers. First of all, it's riding on a 2.6-inch longer wheelbase. Overall length is 187 inches, up from 184.4, and width is unspecified.

Motorweek goes retro with '80s hot hatch shootout

Motorweek's decades of history on television make it the perfect medium to look back into the automotive past and see how things are different now. It recently added old road test videos to its YouTube channel of the Acura NSX and Toyota Supra, as well as the Ferrari F40. For one of its newest flashback clips, Motorweek has exhumed an affordable five-car challenge of 1986's premiere hot hatches.
By today's standards, this is an eclectic field that features fondly remembered classics like the Volkswagen GTI 16-valve and Acura Integra. However, it also throws in some nearly forgotten contenders like the Dodge Colt Turbo and Ford Escort GT. The angular Toyota Corolla FX16 GT-S rounds out the group.
It's fascinating to watch Motorweek run the quintet through the slalom, down the drag strip and on various roads. What's most striking in this clip is the difference in the definition of a performance car between then and now. With its 16-valve, 1.8-liter four-cylinder, the GTI is the burliest of the contenders with 123 horsepower, but it still takes 8.8 seconds to reach 60 miles per hour. By today's standards, that would make it a plain-jane economy car, and not even a particularly quick one.