2016 Acura Mdx 3.5l on 2040-cars

Auto blog

Acura TL gets its top chopped

The roofless Acura TL you see above is a product of Newport Convertible Engineering. No stranger to taking the lids off of Acuras - and a bunch of other cars, like this Jaguar XJ and this Toyota FJ Cruiser - NCE says it was the first US coachbuilder to produce an Acura NSX convertible.
NCE says the conversion takes about six weeks to complete, comes with a five-year warranty from the supplier and doesn't void the original warranty from Acura. On top of that, the interior fitments like sun visors, trunk space and rear seat belts all remain unaltered. Customers who are absolutely against the B-pillar can have it removed, but NCE says "The vehicle will be designed differently without the center bar."
To our eyes the TL looks pretty all right without a roof, and with stripes. NCE will shortly be preparing convertible versions of the 2013 Range Rover Supercharged Autobiography, Porsche Cayenne and Cadillac XTS. For Acura owners, there's a press release below with information on NCE if you have a TL and an urge to go way beyond the sunroof.

Airbag recall widens to include BMW, Chrysler, Ford and Toyota

The recall of faulty airbag inflators supplied by Takata has exploded today to grow to seven automakers. In most cases, only models in certain high-humidity regions were affected because the National Highway Traffic Safety Administration found in its investigation that moisture played a roll in determining whether there would be a problem. However, some companies opted for national campaigns. The exact number of affected models for these campaigns isn't yet known at this time.
BMW is recalling an undisclosed number of 325i, 325Xi, 330i and 330Xi models from the 2001 through 2005 model years and the 2001-2006 model year versions of the 325Ci and 330Ci for the driver side and passenger side inflators. Only vehicles currently registered in Florida, Puerto Rico, Hawaii and the US Virgin Islands are covered under this recall.
Neither Chrysler's filing with NHTSA nor its press release list the specific models affected, but a company spokesperson told Autoblog that at this time it only covers the driver and passenger side inflators for the 2006 Dodge Charger in Florida, Puerto Rico, Hawaii and the US Virgin Islands

Acura builds 345-horsepower RDX A-Spec for SEMA

The 2019 Acura RDX is great — a return to form for the sporty compact luxury crossover. So there's no real harm in giving one the SEMA treatment, especially since it entails a real motorsport tie-in and some legitimate performance parts. As for the giant graphics, well, it's SEMA after all. Graham Rahal races for Honda in the IndyCar series, and he also has his own performance parts company — named, sensibly enough, Graham Rahal Performance — which he started in 2017. They sell some private-label bits manufactured by other companies to their spec, some off-the-shelf parts, and they do tuning and installation work on customer cars. Acura gave the job of building the SEMA RDX to Rahal. There's a fair bit going on under the hood to get the RDX to 345 horsepower from the factory 272 ponies. The 2.0-liter turbo engine gets a bunch of enhancements. The turbo, intake, exhaust manifolds, downpipe, and cat-back (a GRP design) are all aftermarket. There's a customer intercooler, too. KTuning did the ECU with a custom map. On the handling front, the RDX wears Eibach springs, StopTech brakes, HRE wheels at 21 inches, and Michelin Pilot Sport 4S tires. The RDX started life as an A-Spec model in Apex Blue Pearl, and from there GRP applied carbon fiber garnish to the mirrors, grille accents, and lower fascia. Troy Lee Designs did the exterior graphics, and inside there's more carbon fiber and a custom steering wheel (courtesy of Max Papis's MPI Innovations shop). The RDX will be on the show floor if you'd like to check out the Rahal shop's handiwork. Related Video: