2016 Acura Mdx on 2040-cars

Auto blog

530,000 Hondas, Acuras under expanded NHTSA investigation for steering problem

Earlier this year, the National Highway Traffic Safety Administration opened an investigation into the 2022 and 2023 Honda Civic. The agency had received 145 complaints from owners stating that the car suddenly exhibited “sticky steering” and increased steering effort. WeÂ’re now learning that the investigation is expanding to include hundreds of thousands more cars. The original probe included around 238,000 Civics, but the NHTSAÂ’s latest report, issued Friday, noted that the investigation is expanding to include more than 530,000 Hondas and Acura vehicles. The 2022 and 2023 Honda Civic, 2023 Honda CR-V, and 2023 Acura Integra are affected. A drastic increase in complaints drove the expansion, as the NHTSA said it had received 1,300 reports and was aware of at least 14 crashes related to the problem. An alarming 11 of those crashes involved a roadway departure due to loss of steering control. Two of them came after the driver allegedly overcorrected, and there are three known injuries from the crashes. NHTSAÂ’s report found that the problem happened primarily in the winter months and after the car had been driven in a straight line for an extended period to warm up the vehicle and gear. Though alarming, itÂ’s worth noting that this investigation has not yet reached the recall stage. Honda acknowledged the problem, noting that it was a manufacturing issue for the steering gear unit. The manufacturing process created conditions that could cause greater internal stress, which can wear and deform the gears inside the steering component. The NHTSA also found that the factory did not guarantee consistent lubrication throughout the gear, which could be the cause of the temporary increase in steering effort. The automaker directed its dealers to replace the electronic power steering gearbox to correct a manufacturing defect, but NHTSA will continue its process, moving to an engineering analysis. If that study finds a defect, it could request a recall. Government/Legal Acura Honda Safety

Acura MDX Prototype reveals slick new looks, with Type S close behind

The next-generation Acura MDX is here, almost. This three-row crossover you’re looking at is technically being called the MDX Prototype by Acura, but itÂ’s about as close to production as any prototype can get. And what a looker it is. Acura has followed up the slick TLX sedan with another attractive design. With the MDX now the best-selling Acura nameplate of all time, this one was even more important for Acura to get right. Just like the TLX, it benefits from a much longer dash-to-axle dimension, measuring in six inches longer than the outgoing MDX. The pentagon grille, and Chicane-shaped DRLs in the headlights now grace a much wider car. Acura gave this MDX a wider track and a three-inch longer wheelbase, both aiding in making it appear far more graceful and sporty. Acura clearly isnÂ’t holding much of anything back with this MDX Prototype versus the final production car, and weÂ’re liking what we can see so far. Many of the design elements we liked so much on the TLX are transferred over to this crossover body style, and Acura has done so with class. The MDXs you see here are riding on new 21-inch wheels that are bolted up to a new light truck platform and chassis specifically tailored for the MDX. Acura says it provides for more athletic handling, greater ride comfort and a quieter cabin versus the outgoing MDX. ItÂ’s even more rigid than the RDXÂ’s body. Just like the new TLX, Acura has gone with a double wishbone front suspension design to make the MDX an even sportier driver. ThereÂ’s more excitement in the powertrain options for the new MDX, too. Acura promises a Type S version of the MDX is coming with the same 3.0-liter turbocharged V6 youÂ’ll find under the hood of the TLX Type S. It will make 355 horsepower and 354 pound-feet of torque (same as the TLX) in this application. The standard engine will continue to be AcuraÂ’s 3.5-liter V6 that makes 290 horsepower and 267 pound-feet of torque. Both engines will be mated to AcuraÂ’s 10-speed automatic transmission and send power to all four wheels using the latest fourth-generation SH-AWD system. Not all of the performance details are available yet, but Acura says the MDX can be had with four-piston Brembo brake calipers and comes with a drive mode selector that allows you to adjust ride, handling, steering, suspension and powertrain characteristics. More Type S-specific details will need to wait. The interior matches the exterior for flair and elegance.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.