2014 Acura Mdx Technology Certified Pre-owned Black/black on 2040-cars

Auto blog

Acura NSX GT3 racecar bares all in raw carbon

Acura slowly and dramatically revealed the NSX over a period of years. There were previews, concepts, and lots of teases before Acura finally showed us the whole thing. It's a different story for the racecar. And today, the wraps come off the FIA GT3-spec NSX to show all of its bare-carbon glory. The NSX GT3 strips away more than just the paint from the standard road car. The racecar comes sans hybrid system, meaning all the power from the twin-turbocharged 3.5-liter V6 is sent solely to the rear wheels. Modifications to the body include a large rear wing, underbody diffuser, and bigger hood vents for engine cooling. While the hybrid system may be gone, the NSX GT3 uses the same block, heads, valvetrain, crankshaft, pistons, and dry sump lubrication system as the road car. Power is sent through a six-speed sequential gearbox instead of the road car's nine-speed. The NSX GT3 will be built alongside the street version in Ohio. Honda engineers in Japan and North America shared in the development. Final GT3 homologation will be completed by the company's Honda Performance Division in Santa Clarita, CA. Related video:

Acura releases yet another NSX track teaser vid

On Sunday, August 4th (yep, that's tomorrow), a prototype version of the all-new Acura NSX will make its public track debut ahead of the Honda 200 IndyCar race. Acura has already given us a short video snippet to enjoy, but now it's added one more to get our hearts racing just a little more.
Before you watch it, make sure your speakers or headphones are turned up, because what the low-resolution video lacks in visual quality, it more than makes up for with its audio of the NSX's exhaust screaming as the car tackles Mid-Ohio. And at the end of the video, the caption reads "watch the NSX racing prototype take a lap."
Acura isn't joking either. From what we hear, the car is expected to take one lap before the race and then disappear for the weekend. Scroll down to see and hear the NSX in action.

Acura builds 345-horsepower RDX A-Spec for SEMA

The 2019 Acura RDX is great — a return to form for the sporty compact luxury crossover. So there's no real harm in giving one the SEMA treatment, especially since it entails a real motorsport tie-in and some legitimate performance parts. As for the giant graphics, well, it's SEMA after all. Graham Rahal races for Honda in the IndyCar series, and he also has his own performance parts company — named, sensibly enough, Graham Rahal Performance — which he started in 2017. They sell some private-label bits manufactured by other companies to their spec, some off-the-shelf parts, and they do tuning and installation work on customer cars. Acura gave the job of building the SEMA RDX to Rahal. There's a fair bit going on under the hood to get the RDX to 345 horsepower from the factory 272 ponies. The 2.0-liter turbo engine gets a bunch of enhancements. The turbo, intake, exhaust manifolds, downpipe, and cat-back (a GRP design) are all aftermarket. There's a customer intercooler, too. KTuning did the ECU with a custom map. On the handling front, the RDX wears Eibach springs, StopTech brakes, HRE wheels at 21 inches, and Michelin Pilot Sport 4S tires. The RDX started life as an A-Spec model in Apex Blue Pearl, and from there GRP applied carbon fiber garnish to the mirrors, grille accents, and lower fascia. Troy Lee Designs did the exterior graphics, and inside there's more carbon fiber and a custom steering wheel (courtesy of Max Papis's MPI Innovations shop). The RDX will be on the show floor if you'd like to check out the Rahal shop's handiwork. Related Video: