2014 Ram Promaster 1500 High Roof 136" Wb on 2040-cars

Auto blog

Dodge vs. Chevy tug-of-war taken to the extreme

They say "idle hands are the devil's playground," but said playgrounds grow to Disney-sized proportions when a pair of jacked-up trucks, two egos, a chain and an empty mall parking lot are involved. Proof of this is the video below, which shows a Cummins-powered Dodge Ram circa 2006 to 2008 chained tail-to-tail with what looks to be a gasoline-powered Chevrolet Silverado from the late 1990s or early 2000s.
We don't necessarily have to tell you who wins this battle, but we'll let you see for yourself the lengths the "winning" driver goes to prove his point. There's plenty of foul language in the video below, so beware that this might be Not Safe For Work, and not that we should have to tell you, but please, do not try this at home.

2014 Ram Promaster pricing starts at $26,030*

Looking to get back into the thick of things in the commercial van market, Chrysler has set the pricing for the Fiat Ducato-based 2014 Ram Promaster. When it goes on sale by the end of this year, the new Promaster will have prices that range from $26,030 for the Promaster 3500 chassis cab cutaway with a 136-inch wheelbase and topping out at $36,150 for the long-wheelbase, high-roof 3500 cargo van (*prices don't include the $995 destination charge).
While pricing was released for a total of 14 build configurations (including the addition of a 2500 cargo van equipped with rear windows that was not previously announced last month), Chrysler has still not announced how much it will cost to get the optional combination of the EcoDiesel engine and the six-speed automated manual transmission and if it will be available in all styles. To see the full pricing breakdown for each Promaster model and body configuration, scroll down for Chrysler's official press release.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.