Find or Sell Used Cars, Trucks, and SUVs in USA

Porsche 911 Gt3 on 2040-cars

US $18,000.00
Year:2005 Mileage:32183 Color: Black
Location:

Los Angeles, California, United States

Los Angeles, California, United States
Porsche 911 GT3, US $18,000.00, image 1

This well cared for 2005 911 GT3 in stunning Basalt Black Metallic has been updated with a Kevlar 997 GT3 front end, doing away with the little-loved 'amoeba' headlamps in favor of the more stately and classically Porsche round headlights. The car is in outstanding condition with only 32,000 miles since new. The front spoiler lip is scratched but will be replaced upon delivery to a new buyer. Otherwise, this car shows in almost as-new condition. It currently wears a set of custom HRE Performance Wheels with 235-35-19 Pirelli P-Zero Corsa rubber up front and 295-30-19 tires in the rear. The car is equipped with one-piece OEM GT3 Cup leather racing buckets with both standard shoulder belts as well as 6-point, Sparco racing harnesses secured to a factory Porsche stainless steel roll bar/harness bar. A GT3 RS steering wheel has been fitted featuring red stitching to match the red french stitching throughout the interior. The suspension features Bilstien PSS 10 Coil Overs with Brembo custom rotors and oversized calipers. The clutch has been replaced with a Porsche Sport Clutch, and the intake has been replaced with a Fabspeed Intake manifold. The exhaust has been updated to a 997 GT3 Stainless Steel Exhaust system with center muffler bypass all wrapped with a carbon fiber rear lower panel. In addition to the aforementioned upgrades, the car also comes with: a set of FIKSE High Performance Profil 5S track-day wheels wrapped in Hoosier R6 track tires with tire carriers; a new-in-the-box California Car Cover outdoor car cover; an indoor custom fitted Porsche 911 GT3 Cup cover; and a Battery Tender trickle charger. It has recently had the O2 sensors replaced, new brake pads installed, oil and filter change as well as a gear oil change. This one-of-a-kind specimen has seen primarily weekend, highway miles. It has been tracked only about 10 times. The car is running in top form and is a joy to drive. Between the two prior owners, over $160,000 has been invested in this vehicle. You really must see it to appreciate it. From Wikipedia.org:996 GT3 Overview Production 1999–2005 Powertrain Engine 3.6 L 360 hp (268 kW) H6, 3.6 L 380 hp (283 kW) H6 Dimensions Length 174.6 in (4,435 mm) Width 69.7 in (1,770 mm) Height 50.2 in (1,275 mm) As with Porsche's 911 RS models, the GT3 was devoid of any unnecessary items that would add weight to the car. Sound deadening was almost completely removed, as the rear seats, rear loud speakers, sunroof, and air conditioning, although automatic air conditioning and CD/radio became no-cost optional add-ons. The engine of the 996 GT3 set it apart from most of the other Porsche 996 models, although it shared the same basic design of the standard so-called "integrated dry-sump" flat-six engine. The engine is a naturally aspirated flat six-cylinder engine, based on the unit used in the Porsche 962 and Porsche 911 GT2 race cars. That engine was known as the 'Mezger' engine, after its designer Hans Mezger. The engine uses the original air-cooled 911's versatile dry-sump crankcase, with an external oil reservoir. The 996 GT3 has 360 PS (265 kW; 355 hp), compared to the 300 PS (221 kW; 296 hp) of the regular Porsche 996. In GT3 configuration, this so-called "split" crankcase (meaning the parting line of crankcase is on the crankshaft centerline) uses, instead of a fan and finned cylinders, separate water jackets added onto each side of the crankcase to cool banks of three cylinders with water pumped though a radiator. Thus, the GT3 engine is very similar to the completely water-cooled 962 racing car's engine, which is based on the same crankcase. The 962 differs, however, by using six individual cylinder heads while the GT1/GT3, like the air and water-cooled Porsche 959, uses two cylinder heads, each covering a bank of three cylinders. The GT3 engine could thus also be thought of as similar to a 959 engine, but with water-cooled cylinders. Up to early model year 2004 GT3 production, the basic casting used for the crankcase of the GT3 was the same as the air-cooled engine. The "964" casting number was visible on the bottom of the crankcase, and on areas normally machined in air-cooled applications, but not in water-cooled ones. The crankcase casting was changed in mid-2004 to a "996" casting number crankcase to eliminate these external air-cooled remnants, but internally it was the same. Because the 911 air-cooled crankcase uses the Porsche 356 engine to transmission mounting flange configuration, the 996 GT3 used a manual transmission also of air-cooled 911 heritage. This gearbox has interchangeable gear ratios and is more durable making it more suitable for racing than the standard 911 type 996 gearbox. To bring the vehicle's track-prowess to the maximum level, Porsche endowed the GT3 with enlarged brakes, a lowered, re-tuned suspension system, lighter-weight wheels and a new front bumper with matched rear spoiler to help increase downforce, thereby increasing grip. Between 1999 and 2001 a total of 1,868 cars were built. Porsche made significant updates to the GT3 for 2004, the first year the car was offered to US customers. Horsepower was raised to 381 hp (284 kW) and torque to 284 lb·ft (385 N·m), 80% of which was available from 2,000 rpm. The brakig setup was upgraded, now featuring 6-piston calipers on the front (rears remained 4-piston), and the Porsche Ceramic Composite Brake system was offered as an option. The new car also was updated to the 2002 911 facelift including headlights that were differentiated from the Boxster. The engine alone costs approximately 36,000 GBP as a replacement from Porsche due to the cost of the titanium parts. In track testing by American automotive journals, the GT3 managed a 0-60 mph time of 4.5 seconds and a quarter mile time of 12.0 seconds at 118 miles per hour (190 km/h). During skidpad testing the vehicle posted 1.03g. Porsche introduced a revised 911 GT3 RS to the European market in 2003, marking the last revision of the 996 platform car before its discontinuation in 2005. Porsche's official test-driver Walter Rohl completed the Nurburgring Nordschleife with the 996 GT3 in 7 minutes 56 seconds, a feat which was used by Porsche to promote the car. Later, with the 996 GT3 RS, he managed 7 minutes 43 seconds.

Auto Services in California

Young`s Automotive ★★★★★

Auto Repair & Service
Address: 3509 Grand Ave, Diablo
Phone: (510) 444-4185

Yas` Automotive ★★★★★

Auto Repair & Service, Brake Repair
Address: 1610 Allston Way, Albany
Phone: (866) 595-6470

Wise Tire & Brake Co. Inc. ★★★★★

Auto Repair & Service, Tire Dealers, Brake Repair
Address: 949 S La Brea Ave, Torrance
Phone: (310) 904-6163

Wilson Motorsports ★★★★★

Auto Repair & Service
Address: 2138 Otoole ave, San-Jose
Phone: (408) 267-7937

White Automotive ★★★★★

Automobile Parts & Supplies, Auto Body Parts
Address: 250 E Whittier Blvd, Los-Nietos
Phone: (562) 697-2612

Wheeler`s Auto Service ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automobile Air Conditioning Equipment
Address: 327 W 17th St, Santa-Ana
Phone: (714) 543-4689

Auto blog

The mid-engine Porsche backstory

Thu, 09 Oct 2014

As an automaker's identity evolves over years, its signature becomes defined by any number of factors - heritage (Mercedes-Benz), image (Lamborghini), or market share (Toyota). In the case of Porsche, it was an engineering quirk that forged the German company's most enduring character trait.
Porsche would not have survived - let alone, thrived - in today's saturated landscape had it not been for the 911, and that slope-tailed sports car wouldn't have sprung to life without its predecessor, the 356. While phenomenal success of those rear-engine icons built the company, forays into the mid-engine configuration have played a significant part in establishing the brand's identity.
The Mid-Engine Prototype Of Ferry Porsche's Dreams

CEO says Volkswagen's buying spree is over

Mon, 03 Sep 2012


After adding Italian motorcycle icon Ducati to its stable and spending $5.6 billion on the rest of Porsche, Volkswagen CEO Martin Winterkorn says he's done shopping for a while.
"We have enough to do at the moment in taking our twelve brands to where we want to be," Winterkorn tells German newspaper Handelsblatt.

Jay Leno puts carbon fiber wheels to the test on a Porsche 911 GT3 RS

Thu, 04 Sep 2014

Jay Leno's Garage usually focuses on looking at cars new and old, speaking to their owners and then Jay taking a drive to see what he thinks. However, Leno throws his usual shtick to the curb this week to do a full product test of the carbon fiber wheels from a company called Carbon Revolution. If you're not interested in hearing about wheels for 18 minutes, don't worry. They get mounted on a Porsche and are tested back-to-back with stock wheels, and Leno takes the 911 for a track test, too.
While carbon-fiber wheels aren't exactly a new idea, Carbon Revolution's goal is to create a lightweight, one-piece product that can be mass produced. The company even claims that it already has a deal with an OEM automaker to offer them on a vehicle in a few years. The key to the technology is that it doesn't need an expensive autoclave to be made.
In the meantime, the company's carbon fiber wheels are available as an aftermarket option for about $15,000 a set, according to the video. They weigh in at about 15.5 pounds each and offer OEM-levels of stiffness, so they could cut some unsprung mass off of a performance car. Watch here as Jay and his mechanic Bernard lap Willow Springs and give their feedback about what they think of this cutting-edge technology.