2010 Nissan Cube 1.8 Sl on 2040-cars

Auto blog

2015 Nissan Pulsar and Pulsar Nismo Concept show Jekyll and Hyde for the hatch

Nissan is showing two very different sides of its new Pulsar five-door hatchback (on the right) at the 2014 Paris Motor Show. On one hand you get to see the standard version hoping to take the fight to popular European models like the Volkswagen Golf and Ford Focus, but also on the stage is our first glimpse at the Pulsar Nismo Concept (above) that demonstrates the vehicle's more devilish side.
The standard Pulsar is hoping to make a dent in the Euro C-segment ranks. It rides on the same platform as the Nissan Qashqai crossover and is actually about 2.4-inches longer than the Golf. Power comes from a trio of choices. There are 1.2-liter and 1.6-liter turbocharged gasoline engines with 113 horsepower and 187 hp, respectively, and a 1.5-liter diesel with 108 hp. CVTs are offered with them all. The Pulsar is also available with a variety of safety tech, including forward emergency braking, lane departure warning and blind spot monitoring.
However, the real excitement comes from the new Nismo Concept. Nissan is clear that it's "only a design study at this stage," but the sporty hatch imagines a flagship for the Pulsar range. It gets the full suite of Nismo goodies with a suspension dropped to the floor and sharper steering. The exterior also benefits from big air intakes in the front bumper, a rear diffuser with central exhausts, flared fenders and carbon fiber trim pieces. The whole thing is finished in satin gray with the division's traditional red trim. The interior has the same motif with race seats and a three-spoke steering wheel.

Nissan IDX sports coupe future increasingly cloudy [w/poll]

There's a strong desire among enthusiasts for more inexpensive, lightweight, fun-to-drive, rear-wheel-drive cars to exist in a world that contrasts sharply with automakers' desire to make money. While we all love the feeling of controlling the back end with the throttle, front-wheel drive is king when it comes to affordable cars. One of the future bright spots in the rear-drive market appeared to come from Nissan with its pair of IDx concepts. The two showcars from the 2013 Tokyo Motor Show took liberal design inspiration from the classic Datsun 510 and mixed it with modern powertrains in very attractive little packages. However, some pretty dark clouds are reportedly now hanging over the project.
Last we heard, a production version was supposedly "in the plan" from the Japanese automaker, but its trajectory may have changed inside the company in the last few months. According to Pierre Loing, vice president of product planning for Nissan Americas, the issue is making the sports coupe profitable. While Nissan has access to rear-wheel drive platforms, they are all meant for more premium vehicles (read: they cost too much). Assuming around 60,000 annual sales, Loing tells Ward's Auto that making a dedicated chassis for the IDx just isn't a moneymaker. If the car still does see production, it'll be after 2016, he says.
The decision whether to build the IDx has been teetering for a while. Nissan spokesperson Dan Bedore previously told Autoblog that the coupe would need a groundswell of support from consumers and enthusiasts if is to actually have a shot at production. If you are among the hopeful looking to see this affordable, rear-drive performance car in showrooms, get some friends together and start letting Nissan know that you actually want it - you can start here by adding a Comment and voting in our poll, because we're going to send the results on to Nissan.

Mercedes and Infiniti confirm joint production in Mexico [w/video]

It's official, folks: After initial reports last week indicated that Mercedes-Benz was preparing to begin assembly at the Nissan plant in Aguascalientes, Mexico, the two parent companies have announced just that. Only instead of using the existing Nissan plant at the site (in operation since 1992), Daimler and the Renault-Nissan Alliance have announced a joint venture to build a new one alongside it.
The latest stage in the growing French-German-Japanese collaboration is part of a new collaboration that will see Infiniti and Mercedes jointly develop and build a line of compact premium vehicles, with the first Infiniti models set to roll off the assembly line in 2017 and the first Benzes to follow a year later. Neither party announced exactly which models that would encompass, but Mercedes already has a robust line of small vehicles (including the A-Class, B-Class, CLA and GLA), and Infiniti has long been toying with the idea of slotting in something smaller below the Q50.
The billion-euro project, split evenly between the two industrial giants, is set to create 5,700 new jobs in Mexico. In addition to the Aguascalientes project, Infiniti and Mercedes are also undertaking joint production of four-cylinder engines (initially for the C-Class and Q50) in Decherd, Tennessee, from which they will be exported around the world. By the time the new factory in Mexico reaches full capacity in 2021, it will have the capability to produce 300,000 vehicles annually. That's on top of the 850,000 vehicles the existing facility is capable of handling.