Mini, Cooper, Jcw, Jcw Gp, 2006 Gp on 2040-cars

Auto blog

2017 Mini John Cooper Works Clubman ALL4 | Pint-size performer with a premium price

Last September, Mini revealed the Clubman John Cooper Works (JCW). It applied the same general JCW formula used on the regular three-doors to the longest Mini by giving it even sportier suspension and the potent 228-horsepower turbocharged 2.0-liter four-cylinder engine. But from there, Mini gave the Clubman JCW even more torque than other JCW models, and the most of any Mini model, with a total of 258 pound-feet. It also fitted standard all-wheel drive. On paper, it sounds like the ultimate performance Mini, and it doesn't hurt that it's about the most practical model. So how did it hold up in practice? First of all, this Mini has a serious weight problem. You might be tired of alarmist auto journalists whining about the increasing size of vehicles, but it's a major issue with this Mini. It actually weighs more than a V6 Chevrolet Camaro. The Camaro weighs 3,435 pounds, and the Mini weighs 3,450. That's for the manual transmission version, too. Our automatic-equipped test car weighed more than that. As a result, it feels noticeably slower than the competition, despite making 228 horsepower and the aforementioned torque. There's an area in which the Clubman JCW could easily lose some weight, and that's in the all-wheel-drive system. It's a Haldex-style system that only kicks in when the front wheels start to slip, so it's only beneficial for traction in bad weather, not for improving the driving experience by, say, reducing the car's understeer. That's fine for more mainstream Minis, but the JCW line is all about performance and speed, so if the all-wheel-drive system doesn't improve the driving experience, it should simply be dropped to make the car lighter. Despite the Mini's prodigious portliness, there are good points. The engine is very smooth, and power comes on almost instantly. In more aggressive driving modes, the exhaust pops and burbles almost every time you lift off the gas pedal. T he eight-speed automatic paired with this engine was equally up to the task. Shifts were fast and smooth. And it even worked well leaving it in automatic mode. It held gears smartly, and it would downshift while braking to ensure you had the right gear when taking off again. The Clubman JCW also has the brand's trademark corner-carving skills. Body roll is nearly absent in the normal driving mode, and what little was evident is removed when switching to Sport mode. The car responds immediately to each steering input, and it has tenacious grip through corners.

Mini reveals it's developing an electric John Cooper Works model

We at Autoblog are extremely fond of the Mini Cooper SE electric car. So we're also excited to learn that Mini is also developing an electric John Cooper Works model. Unfortunately, that's all Mini has actually said about a future electric John Cooper Works model: that it's in development. Anything else about it, such as how hardcore it will be, or what motor it will use, is entirely up for speculation. All we have to go on are photos of the prototype. From the looks of it, the prototype is simply a Mini John Cooper Works (JCW) GP, but with an electric powertrain. The entire body, even the giant wing and funky fender flares, is the same as the uncompromising GP, except for the grille. The grille is the mostly solid example used on the Cooper SE. There aren't any tailpipes on this car either, for obvious reasons. This certainly suggests Mini is planning a mean electric JCW, and not just a slightly stiffer upgrade from the S/SE models. It raises big questions about the motor, though. The gas-powered GP is the most powerful production Mini in history with over 300 horsepower. Only one BMW motor has been used in a Mini so far: the base i3 motor, which makes 181 horsepower. The i3s has a punchier motor that makes 195 horsepower that would probably drop in easily, but it wouldn't seem powerful enough for a GP-type car. Perhaps the iX3's motor, which makes 286 horsepower, could fit? It would certainly be near enough to the GP's engine. Maybe even one of the motors from the dual-motor, 500-horsepower BMW iX would do the job? We'll just have to wait and see, and it's hard to say just how long, since Mini gave no information on reveals. Hopefully it won't be too long if the company is testing minimally camouflaged electric GP prototypes. Related Video:  

Mini Rocketman concept reportedly going into production as an EV

Remember the Mini Rocketman Concept from the 2011 Geneva Motor Show? If you don’t thatÂ’s OK, as itÂ’s been almost an entire decade since Mini pulled the wraps off. Despite the massive time lapse, Mini decided to revive the concept, not just for show. The companyÂ’s finally going to put the Rocketman into production, as an electric vehicle. We've heard this before, a few years ago, but nothing was set in stone. Now it seems a decision has been made. AutoCar in Britain recently learned that the Rocketman will fulfill its premise as the companyÂ’s first subcompact city car. The production model, scheduled for 2022, will reportedly be heavily reworked and built as a joint project with Chinese automaker Great Wall Motors. “WeÂ’re advancing plans for a model along the lines of the Rocketman. ItÂ’s a car we have been looking at for a long time, but to build it profitably at the price point we think customers are prepared to pay, you need a joint venture partner to share costs. Great Wall Motors has provided that opportunity with a shared electric car platform that will be used by Mini,” an anonymous “senior BMW official” was quoted as saying. The production Rocketman will retain its three-door hatchback design and is expected to serve as the manufacturerÂ’s newest entry-level model. It will be built by Great Wall Motors in Jiangsu, China, while BMW oversees the design and production with plans to sell it in all markets globally. When the Rocketman first surfaced at Geneva, it was essentially BMWÂ’s direct response to DaimlerÂ’s Smart ForFour. However, even with positive feedback from prospective customers, the project was shelved because development discussions between BMW and its initial partner, Peugeot, ended abruptly. The companies were reportedly going to share platforms and powertrains in another joint venture. In the new agreement with the Chinese company, the production model will apparently use a small-car platform used by Great Wall Motors called the Ora R1. The Peugeot-BMW project was going to use either a three-cylinder gas or diesel engine. But the new model will gain an all-electric powertrain by Spotlight Automotive as a part of BMWÂ’s massive plan to launch up to 25 new plug-in hybrid and all-electric vehicles by the end of 2023. One of those models is the newly released all-electric Cooper SE.