Salvage,no Damage,light Water Flood,no Issues. on 2040-cars

Auto blog

Never-was Jaguar C-X75 hybrid supercar driven by Autocar

There's lucky, and then there's "I got to drive the Jaguar C-X75." The crew from Autocar is among the handful of souls who can honestly make the latter statement. Jaguar invited the publication down for a little time in both the passenger and driver seats around the automaker's proving grounds. While there's no end to the jealousy oozing from our pores, the good news is that there were a few cameras on hand to capture the experience. As you may recollect, the C-X75 Concept was a unique hybrid supercar concept built to duke it out with the likes of the Ferrari LaFerrari, Porsche 918 and the McLaren P1. The British automaker put it on track for production, but unfortunately stopped the project about six months ago.
With a twincharged 1.6-liter four-cylinder engine capable of revving to 10,000 rpm, the C-X75 concept yields 502 horsepower and gets partnered with four electric motors - one at each wheels. A 19kWh lithium-ion battery pack serves up 300kW of power, and combined, the motors and battery are capable of yielding an additional 194 horsepower and 295 pound-feet of torque. Combined, the driveline is good for more than 850 horsepower and 738 pound-feet of torque. Said another way, the C-X75 will do the 0-60 miles per hour dance in under three seconds.
And Autocar got to drive it. You can watch the video for yourself by scrolling below.

2015 Jaguar F-Type V6 S Coupe

My first, ill-fated job in the auto world was at an exotic car dealer in metro Detroit. The job itself sucked, but the cars, they were exceptional. Amidst a sea of Tiptronic Porsche Boxsters, first-gen Mercedes-Benz SLKs and abused second-generation Range Rovers, there were some real gems.
In particular, I have fond memories of a trio of undrivable Jaguar E-Types. Two Series II coupes as well as a Series III convertible (that featured a mostly broken roof) spent the entirety of my brief tenure at the dealership in the back of the musty service garage. I'd make side trips through there just to see the trio of E-Types, which rarely failed to put a big, ridiculous grin on my face.
Since that time in the summer of 2005, there hasn't been a single Jag that's been capable of eliciting the same goofy smile. Not the XFR-S, with its un-aristocratic wing, nor the XKR-S. At the 2013 Los Angeles Auto Show, though, Jaguar introduced this F-Type Coupe. Sure, the droptop model had been around for a bit, but I thought it was the new coupe that most captured the E-Type's classic aesthetic, with a swooping roofline, those gorgeous rear haunches and a long, powerful hood. I had to drive one.

Lightweight E-Type to show historic side of Jaguar Special Operations in Monterey

Jaguar has made a lot of great vehicles over the years, but as far as historians are concerned, it still very much lives in the shadow of the original E-Type, small as it was. In its image, Jaguar has made two generations of XK and the new F-Type, but what we have here is the most faithful continuation of the E-Type heritage yet.
Alongside the Range Rover Sport SVR and the F-Type Project 7 (making its US debut), Jaguar Land Rover and its new Special Operations division will roll into Pebble Beach this year with the continuation Lightweight E-Type. Of the 72,500 E-Types which Jaguar built between 1961 and 1975, only a dozen were Lightweight versions, and they remain the most coveted E-Types of all. It originally planned on building 18 examples, though, and five decades later, it's now committed to completing that original production run in faithful detail.
The Lightweight E-Type was based on the standard roadster and was homologated as such, just with some key upgrades to make it lighter and faster. The biggest change, of course, was the lightweight aluminum bodywork that cut 205 pounds off the curb weight. To replicate it, Jaguar took the last example (the only one made in 1964 after the original eleven were made in '63), scanned half its body surface, mirrored it to ensure symmetry and set about reproducing it with the same standard of materials available in the Sixties (and resisting the urge to go with more modern grades of aluminum). 75 percent of the 230 components are made in-house, with the largest stampings outsourced and built on machinery built to Jaguar's specifications off-site.