1965 Ford Fairlane 2 Door Mustang-galaxie-wheel Parts Car C-13 on 2040-cars

Auto blog

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

Ford C-Max Solar Energi takes a recharging station wherever it goes

Companies ranging in size from small startups to major automakers have been experimenting with solar-powered charging stations for EVs and plug-in hybrids. And, of course, people have been powering vehicles with onboard solar panels for quite some time, too. Still, Ford's new C-Max Solar Energi Concept shows the promise of a truly practical implementation of solar on a production vehicle, and it may not be as far off in the future as we had thought.
As we reported a few days ago, the Solar concept makes use of a "concentrator lens" that focuses sunlight onto the Ford's roof-mounted solar panels. The special lens follows the rays of the sun to maximize the amount of charge being fed to the batteries of the car, taking about a day to fully charge the 21-mile, all-electric range of the C-Max Energi. Ford data suggests that combination might be enough to power 75 percent of all trips made by a statistically average driver. In turn, using the sun to power a vehicle could reduce yearly C02 emissions by up to four metric tons when compared with the driver of an average gasoline-powered sedan.
We've got live images of the C-Max Solar Energi Concept, jauntily tilted on its display to best present it's signature solar panels, straight from the CES floor.

Tier 1 suppliers call GM the worst OEM to work with

Among automakers with a big US presence, General Motors is the worst to work for, according to a new survey from Tier 1 automotive suppliers, conducted by Planning Perspectives, Inc.
The Detroit-based manufacturer, which has been under fire following the ignition switch recall and its accompanying scandal, finished behind six other automakers with big US manufacturing operations. Suppliers had issues with trust and communications, as well as intellectual property protection. GM was also the least likely to allow suppliers to raise their prices in the face of unexpected increases in material cost, all of which contributed to 55 percent of suppliers saying their relationship with GM was "poor to very poor."
GM's cross-town competitors didn't fare much better. Chrysler finished in fifth place, ahead of GM and behind Dearborn-based Ford, which was passed for third place this year by Nissan. Toyota took the top marks, while Honda captured second place.