Find or Sell Used Cars, Trucks, and SUVs in USA

1957 Ford Fairlane on 2040-cars

Year:1957 Mileage:53670 Color: IS IN PRIMER AND THE INTERIOR WILL NEED TO BE REDONE
Location:

Freedom, Pennsylvania, United States

Freedom, Pennsylvania, United States

1957 FORD FAIRLANE 2 DOOD POST (SEDAN).  THIS VEHICLE RUNS DRIVES AND STOPS BUT HAS NOT BEEN ROAD TESTED   THE EXTERIOR IS IN PRIMER AND THE INTERIOR WILL NEED TO BE REDONE.

THE GOOD:

     NEW GAS TANK AND SENDING UNIT(I have not put gas in it I have only used a temporary gas tank)

     REDONE RADIATOR

     REBUILT CARBURETOR

     REDONE HEADS (this car had not run since 1994 and when i got it running it only had good compression in 4 holes, when I had the heads redone the guy told me that this engine could not have too many miles on it because  no  parts were replaced the heads only needed cleaned up, so its possible that the speedometer has the original miles on it 53,640) 

THE BAD

     IT DOES HAVE SOME RUST IN THE ROCKERS AND FRONT FENDERS

     TIRES ARE DRY ROTTED AND WILL HOLD AIR BUT WILL NEED REPLACED

     THERE IS A PROBLEM WITH THE RIGHT REAR WINDOW IT IS CURRENTLY OUT i'M NOT SURE WHAT THE PROBLEM IS, ALL THE PARTS SEEM TO BE THERE 

I WILL DELIVER THIS VEHICLE WITHIN 1,000 MILES OF ZIP CODE 15042 FOR $1.75 PER LOADED MILE PLUS TOLLS    CALL TIM AT 7TWO4 SIX50 3ONE28

Auto Services in Pennsylvania

Wyoming Valley Kia - New & Used Cars ★★★★★

Auto Repair & Service, New Car Dealers, Used Car Dealers
Address: 560 Pierce St, Shavertown
Phone: (570) 714-9924

Thomas Honda of Johnstown ★★★★★

New Car Dealers
Address: 1920 Bedford St, Beaverdale
Phone: (814) 262-2140

Suder`s Automotive ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Automotive Tune Up Service
Address: 1315 Randall Ave, Wycombe
Phone: (215) 949-1182

Stehm`s Auto Repair ★★★★★

Auto Repair & Service
Address: 1601 Cinnaminson Ave, Andalusia
Phone: (866) 595-6470

Stash Tire & Auto Service ★★★★★

Auto Repair & Service, Tire Dealers, Mufflers & Exhaust Systems
Address: 939 Boston Hollow Rd, Mckeesport
Phone: (412) 754-1055

Select Exhaust Inc ★★★★★

Auto Repair & Service, Automobile Parts & Supplies, Mufflers & Exhaust Systems
Address: 5045 Pottsville Pike, Port-Clinton
Phone: (610) 916-1111

Auto blog

Autoblog joins Elon Musk and Danica Patrick in accepting ALS Ice Bucket Challenge

Tue, 19 Aug 2014

Unless you've been living in an off-the-grid cabin in the woods for the last couple of weeks or abstain entirely from social media activities, you've probably seen someone you know dump a bucket of ice and water over their own head recently. While the origins of the so-called Ice Bucket Challenge are shrouded in a history typical of Internet memes, its effectiveness in raising money and awareness for the ALS Association has been astonishing.
Celebrities from the worlds of entertainment, sports, technology and more have generated untold millions of video views in support of the organization that is helping patients with Amyotrophic Lateral Sclerosis (ALS, better known as Lou Gehrig's Disease), and generated a much needed influx of cash, as well. Recent reports have some $15.6M raised in the last two weeks.
Of course, the big-hearted world of automotive celebrities has taken part in the drenching charity effort as well. Follow on below for some of the biggest names on four wheels getting iced for charity, with a smattering of your favorite Autobloggers thrown in for good measure.

2015 Ford Mustang potentially 'leaked' by Car and Driver

Mon, 28 Oct 2013

Few upcoming debuts have been as eagerly anticipated as the all-new Ford Mustang that's expected to debut shortly as the Mustang's 50th anniversary year approaches. Well, Car and Driver magazine would have us wait no longer as it claims to be leaking Ford's new global pony car early.
Of course what you're looking at is just as likely to be a composite rendering based on what C/D projects the new Mustang to look like, but to our eyes it looks spot on. Combining design traits from the Evos Concept with classic Mustang signatures and Ford's Aston-inspired grille treatment, C/D's images - including a complete 360-degree digital navigator - show a Mustang not only for the modern era, but also for global distribution, taking a quintessentially American car to markets its predecessors were never designed for.
Those global considerations are expected to spell the demise of the outgoing Mustang's holdout live rear axle in favor of an independent suspension, and a slight constricting of the exterior dimensions. And thanks to a separate leak, coming from a digital survey, we have apparent confirmation of what will power the new pony car. While the existing 3.7-liter V6 and 5.0-liter V8 engines will apparently carry over with only slight adjustments in output, the survey confirms a new 2.4-liter turbo four will be positioned in between them, offering slightly more power than the V6 but markedly improved fuel economy for a manageable $560 premium over base.

Ford cleans up painting process with cameras

Thu, 22 Aug 2013

Knowing how the bacon gets made rarely entices us and, in the same vein, the same usually goes for knowing about how new cars get painted. But in both instances, however, quality - or a lack thereof - is instantly obvious. In terms of the latter, Ford is showing off its new paint quality process with 3D Dirt Detection Technology to find imperfections in vehicle paint more easily and more quickly.
This process - being performed on the F-150 SVT Raptor above - uses 16 computer-controlled cameras to create a three-dimensional model (inset) of the vehicle to detect flaws in the paint including dirt particles, which can then be buffed out manually. Ford says this new technology cuts down on time spent looking for paint flaws and gives workers more time to correct those that are discovered.
Currently, Ford only uses its 3D Dirt Detection Technology system at three factories (the Dearborn, MI facility, along with those in Louisville, Kentucky and Valencia, Spain), but it will soon spread to five more plants in North America. Ford has released a video and press release for this innovative and unexpectedly interesting process, both of which are posted below.