1970 F100 Ford Lwb - Must See!!!!!!!!!!! on 2040-cars

Auto blog

Check out Ford's fully automated self-parking car [w/video]

As automakers continue to find uses for autonomous and semi-autonomous vehicle technology, Ford of Europe has announced that it is developing a self-parking system for future use. More advanced than the Active Park Assist already offered in many Ford products, the new Fully Assisted Parking Aid can take full control of the vehicle and can navigate angled and perpendicular parking spots.
While today's Active Park Assist can only parallel park with the driver controlling the gas, brake and gear selection, Fully Assisted Parking Aid can operate steering, gas, brake and gear selection all while making sure the car is properly parked in the intended space. As with APA, the driver pushes a button to make the car look for a proper spot (at speeds of up to 18 miles per hour), and when an adequate space is located, the operator pushes another button (either inside the car or outside via remote control) for the car to park itself - the button must be pressed throughout the whole parking maneuver. Even though Ford says that the car can effect gear selections on its own, the system must still start from Neutral, and the automaker isn't saying whether the car can put itself into Park when done or put itself in Drive when the operator is ready to go.
Ford is also taking the opportunity to announce its new Obstacle Avoidance technology. This automated system is able to detect objects - including pedestrians - in the road, warn drivers of said objects and, if needed, stop and steer automatically to avoid hitting the obstacle. Both systems are still in the prototype phase, so there is no word as to when we could see either on a production vehicle.

Ford reveals new rapid prototyping and low-volume production techniques [w/video]

It's called "F3T," and that stands for Ford Free-form Fabrication Technology. The process that The Blue Oval has developed means being able to sidestep the weeks-long process of tool-and-die making when engineers want to construct a new part, allowing them to fabricate a three-dimensional part from a two-dimensional sheet of metal in just hours.
While F3T is being developed it is limited to "low-volume prototyping or even low-volume niche vehicles," but the next step is to evaluate it for use in Ford's global manufacturing facilities. You can find out more about it in the video and the press release below.

Ford readying Ranger-based Everest SUV?

Way back in August, we showed you a Ford concept for the Australian market called the Everest. Now, we can show you that work on the new Ranger-based SUV is well under way.
At this stage, it's still quite clearly a mule (note the misalignment of the front and rear doors), wearing the Ranger's front end and the rump of Ford's overseas Territory crossover. The wheelbase is shorter than a Ranger, according to our spy photographers, which strikes us as somewhat odd for a more passenger-oriented vehicle. Disc brakes should be fitted at all four corners, while the new SUV, which will almost certainly wear the Everest name, should sport a new rear suspension.
In terms of looks, we're expecting the Everest Concept to inform the appearance of the production model. Naturally, there will also be some interior tweaks, particularly around the dashboard, which is covered in these photos.