2009 Dodge Ram 1500 Quad Cab Pickup 4-door 4.7l on 2040-cars

Auto blog

Motorweek goes retro with '80s hot hatch shootout

Motorweek's decades of history on television make it the perfect medium to look back into the automotive past and see how things are different now. It recently added old road test videos to its YouTube channel of the Acura NSX and Toyota Supra, as well as the Ferrari F40. For one of its newest flashback clips, Motorweek has exhumed an affordable five-car challenge of 1986's premiere hot hatches.
By today's standards, this is an eclectic field that features fondly remembered classics like the Volkswagen GTI 16-valve and Acura Integra. However, it also throws in some nearly forgotten contenders like the Dodge Colt Turbo and Ford Escort GT. The angular Toyota Corolla FX16 GT-S rounds out the group.
It's fascinating to watch Motorweek run the quintet through the slalom, down the drag strip and on various roads. What's most striking in this clip is the difference in the definition of a performance car between then and now. With its 16-valve, 1.8-liter four-cylinder, the GTI is the burliest of the contenders with 123 horsepower, but it still takes 8.8 seconds to reach 60 miles per hour. By today's standards, that would make it a plain-jane economy car, and not even a particularly quick one.

Dodge idles Viper production again at Conner Avenue

You've got to hand it to Dodge for having the gumption to put the original Viper into production in the first place. It was, after all, much more of an emotional decision than a practical one, and a move which saw the first production V10 engine placed in a road car - long before the advent of the Lamborghini Gallardo, Audi R8, Porsche Carrera GT or Lexus LFA, not to mention the other Ford, BMW and Volkswagen Group models that used such engines.
It's now been 22 years since the first Viper entered production and the Viper still rolls on several generations later, but we're sad to say that courageous decision has not always been met with overwhelming sales success. In fact parent Chrysler was forced to idle the Conner Avenue plant where the Viper is made back in April due to slow sales. And while production resumed again as planned on June 23, it apparently didn't do the trick.
As a result, Chrysler corporate communications chief Shawn Morgan revealed to Autoblog that the assembly line has been shut down again for another two weeks. The line was up and running for nearly two full work weeks from June 23 until the holiday weekend that started on Thursday, July 3. But instead of coming back online today as planned, it's been idled again for the weeks of July 7 and 14. That means it will be July 21, at the earliest, before the serpentine supercars start slithering down the assembly line at Conner Avenue again. Once it does, however, production is set to resume at the same pace it was before the shutdown.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.