2012 Dodge Caliber Sxt Plus on 2040-cars

Auto blog

Dodge Charger R/T NHRA Funny Car is ready to burn rubber at SEMA [w/video]

The Dodge Charger R/T is all set to rocket down the drag strip in NHRA Funny Car competition with a completely redesigned body debuting at this year's SEMA Show. While only the front decal, side scallops and rear logo really signal this racer as a Charger, that doesn't take away from its promise of hitting absolutely ludicrous speeds.
The engineers' biggest tweak to the body was moving the cockpit further back. This created more clearance under the hood, and the change came with added advantage of giving the driver better visibility out of the car. Composites like Kevlar also helped make the one-piece shell even lighter, while not sacrificing strength.
The new design has already undergone extensive time in the wind tunnel and real-world runs to make sure that none of the changes negatively impacted the aerodynamics. With those tests out of the way, the Charger R/T Funny Car will have the first chance to truly prove itself in NHRA competition at the 2015 Winternationals from February 5-9 at Auto Club Raceway in Pomona, CA.

Chrysler recalling 278,222 trucks and SUVs over bad rear axles

Chrysler has issued a recall of 278,222 light trucks and sport utility vehicles here in the United States. The reason: bad rear axles. Specifically, according to the National Highway Traffic Safety Administration, the rear axle pinion nut may lack a necessary adhesive patch, which could cause the nut to loosen. If this happens, the axle can lock up, which could cause all sorts of havoc on the road.
This is an expansion of the rear axle recall announced in October of last year, where 44,300 Ram 1500 and Dodge Dakota models were being called in. At that time, 12 accidents had been reported due to the faulty axle pinion nut.
Affected vehicles include Ram 1500 trucks from the 2009 to 2012 model years, Dodge Dakota models from the 2009 to 2011 model years, and both the Chrysler Aspen and Dodge Durango SUV twins, both from the 2009 model year only.

Dodge Scat Pack for 5.7L Hemi V8 detailed, priced

Dodge revived the Scat Pack name back in November at the 2013 SEMA show. At the time, though, we were short of details on forthcoming upgrade packages, which were destined to add some oomph to the Challenger, Charger and Dart. We're still waiting to hear about the upgrades to the Dart's 2.4-liter four-pot, but Dodge has gone ahead and released the details on the upgrades to the 5.7-liter Hemi V8 in the Challenger and Charger R/T.
As we detailed in our original post, three different Scat Packs will be available that will allow customers to upgrade their cars without voiding the warranties. Starting with the $2,195 Stage 1 kit, owners will net an extra 18 horsepower and 18 pound-feet of torque thanks to a Mopar-branded cold-air intake, exhaust and ECU ref lash. Stage 1 is also the only package that could be installed outside of a Chrysler-authorized service center without voiding the warranty (a mechanically competent owner could even do it at home, we're told by Dodge). Stage 2 builds on the entry level Scat Pack, and adds performance camshaft kit, which boosts output over the stock 5.7 by up to 30 hp for $1,895. As with the Stage 1, the ECU is tweaked.
For those that want to go whole hog, they can add the Stage 3 for $4,995. The top-tier gets quite serious, adding CNC-ported cylinder heads, as well as high-flow headers and cats. Output over stock is 58 hp and 47 lb-ft of torque. Each kit comes with a pair of badges, just in case owners want a bit of visual flair.